Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=7521): Process ended prematurely: osmo-stp_10.42.42.5(pid=7521) [trial-2383↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7521)]
Standard Output
---------------------------------------------- trial-2383 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 23:19:01.369225 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:19:01.382125 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 23:19:01.562673 tst iperf3m4.py: using LAC 32196 23:19:01.691074 tst iperf3m4.py: using RAC 66 23:19:01.814882 tst iperf3m4.py: using CellId 32196 23:19:01.938148 tst iperf3m4.py: using BVCI 32197 23:19:01.963111 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:19:01.975749 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:19:01.989325 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:19:02.004030 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:19:02.018497 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:19:02.030892 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:19:02.045422 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:19:02.058769 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:19:02.071425 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 23:19:02.194730 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 23:19:02.315365 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 23:19:02.435612 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 23:19:02.732770 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 23:19:02.868154 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:19:03.204451 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7507): Launched 23:19:03.484136 run iperf3-srv_10.42.42.10(pid=7508): Launched 23:19:03.684439 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 23:19:03.820539 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:19:04.157824 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7509): Launched 23:19:04.437212 run iperf3-srv_10.42.42.10(pid=7510): Launched 23:19:04.637635 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 23:19:04.773209 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:19:05.109167 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7511): Launched 23:19:05.388457 run iperf3-srv_10.42.42.10(pid=7512): Launched 23:19:05.588059 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 23:19:05.723304 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:19:06.058398 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7513): Launched 23:19:06.337202 run iperf3-srv_10.42.42.10(pid=7514): Launched 23:19:06.536915 tst iperf3m4.py:8: start network... 23:19:06.672287 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:19:07.190532 run create_hlr_db(pid=7515): Launched 23:19:07.378613 bus /gobi_6: Setting Powered False 23:19:08.399389 run create_hlr_db(pid=7515): Terminated: ok {rc=0} 23:19:08.808196 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7517): Launched 23:19:09.113058 run osmo-hlr_10.42.42.2(pid=7518): Launched 23:19:09.224155 run osmo-stp_10.42.42.5: Starting osmo-stp 23:19:09.756749 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7520): Launched 23:19:10.063817 run osmo-stp_10.42.42.5(pid=7521): Launched 23:19:10.176448 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:19:10.711355 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7523): Launched 23:19:10.820554 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:19:11.087963 run patchelf(pid=7524): Launched 23:19:11.267061 run osmo-stp_10.42.42.5(pid=7521): ERR: Terminated: ERROR {rc=1} [trial-2383↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7521)] 23:19:11.397803 run osmo-stp_10.42.42.5(pid=7521): stdout: | (launched: 2022-12-12_23:19:09.912456) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:19:11.529152 run osmo-stp_10.42.42.5(pid=7521): stderr: | �[0;m�[38;5;43m20221212231910087 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212231910087 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212231910087 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212231910087 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212231910088 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212231910088 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212231910088 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:19:11.656097 run osmo-stp_10.42.42.5(pid=7521): stdout: | (launched: 2022-12-12_23:19:09.912456) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:19:11.781944 run osmo-stp_10.42.42.5(pid=7521): stderr: | �[0;m�[38;5;43m20221212231910087 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212231910087 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212231910087 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212231910087 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212231910088 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212231910088 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212231910088 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:19:11.930334 run patchelf(pid=7524): Terminating (SIGINT) 23:19:12.104037 run patchelf(pid=7524): Terminated: ok {rc=0} 23:19:12.135903 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=7521): Process ended prematurely: osmo-stp_10.42.42.5(pid=7521) [trial-2383↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7521)] [trial-2383↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 23:19:12.145117 tst iperf3m4.py:8: Test FAILED (10.8 sec) 23:19:12.204935 run osmo-hlr_10.42.42.2(pid=7518): ERR: Terminated: ERROR {rc=237} [trial-2383↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7518)] 23:19:12.253373 run osmo-hlr_10.42.42.2(pid=7518): stdout: | (launched: 2022-12-12_23:19:08.963073) 23:19:12.302384 run osmo-hlr_10.42.42.2(pid=7518): stderr: | �[0;m�[1;31m20221212231909139 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212231909139 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212231909139 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212231909139 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212231909139 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212231909139 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212231909182 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212231909192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212231909192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212231909192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:19:12.344058 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7507): Terminating (SIGTERM) 23:19:12.383325 run iperf3-srv_10.42.42.10(pid=7508): Terminating (SIGTERM) 23:19:12.422600 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7509): Terminating (SIGTERM) 23:19:12.461723 run iperf3-srv_10.42.42.10(pid=7510): Terminating (SIGTERM) 23:19:12.501071 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7511): Terminating (SIGTERM) 23:19:12.541096 run iperf3-srv_10.42.42.10(pid=7512): Terminating (SIGTERM) 23:19:12.580237 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7513): Terminating (SIGTERM) 23:19:12.619276 run iperf3-srv_10.42.42.10(pid=7514): Terminating (SIGTERM) 23:19:12.658508 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7517): Terminating (SIGTERM) 23:19:12.697712 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7520): Terminating (SIGTERM) 23:19:12.736901 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7523): Terminating (SIGTERM) 23:19:12.746300 --- ParallelTerminationStrategy: PID 7507 died... 23:19:12.798882 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7507): Terminated: ok {rc=0} 23:19:12.808113 --- ParallelTerminationStrategy: PID 7508 died... 23:19:12.860013 run iperf3-srv_10.42.42.10(pid=7508): Terminated {rc=256} 23:19:12.869660 --- ParallelTerminationStrategy: PID 7509 died... 23:19:12.921903 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7509): Terminated: ok {rc=0} 23:19:12.931452 --- ParallelTerminationStrategy: PID 7510 died... 23:19:12.983928 run iperf3-srv_10.42.42.10(pid=7510): Terminated {rc=256} 23:19:12.993590 --- ParallelTerminationStrategy: PID 7511 died... 23:19:13.046080 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7511): Terminated: ok {rc=0} 23:19:13.055683 --- ParallelTerminationStrategy: PID 7512 died... 23:19:13.107944 run iperf3-srv_10.42.42.10(pid=7512): Terminated {rc=256} 23:19:13.117641 --- ParallelTerminationStrategy: PID 7513 died... 23:19:13.169762 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7513): Terminated: ok {rc=0} 23:19:13.179365 --- ParallelTerminationStrategy: PID 7514 died... 23:19:13.231402 run iperf3-srv_10.42.42.10(pid=7514): Terminated {rc=256} 23:19:13.241092 --- ParallelTerminationStrategy: PID 7517 died... 23:19:13.293306 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7517): Terminated: ok {rc=0} 23:19:13.302953 --- ParallelTerminationStrategy: PID 7520 died... 23:19:13.355235 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7520): Terminated: ok {rc=0} 23:19:13.365018 --- ParallelTerminationStrategy: PID 7523 died... 23:19:13.417292 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7523): Terminated: ok {rc=0} 23:19:13.505448 bus /gobi_4: Setting Powered False 23:19:14.607154 bus /gobi_4: Setting Powered False 23:19:15.718510 bus /gobi_1: Setting Powered False 23:19:16.824051 bus /gobi_1: Setting Powered False 23:19:17.933382 bus /gobi_0: Setting Powered False 23:19:19.035888 bus /gobi_0: Setting Powered False 23:19:20.145638 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7521): Process ended prematurely: osmo-stp_10.42.42.5(pid=7521) [trial-2383↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7521)]