Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=2838): Process ended prematurely: osmo-stp_10.42.42.5(pid=2838) [trial-2383↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2838)]
Standard Output
---------------------------------------------- trial-2383 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 22:31:10.522794 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:31:10.533688 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 22:31:10.697904 tst cs_paging_gprs_active.py: using LAC 31943 22:31:10.817009 tst cs_paging_gprs_active.py: using RAC 68 22:31:10.935927 tst cs_paging_gprs_active.py: using CellId 31943 22:31:11.061442 tst cs_paging_gprs_active.py: using BVCI 31944 22:31:11.086667 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:31:11.097952 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:31:11.109156 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:31:11.120364 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:31:11.131496 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:31:11.142629 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:31:11.153919 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:31:11.164878 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:31:11.176138 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:31:11.299080 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:31:11.581397 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:31:11.709064 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:31:12.024219 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2828): Launched 22:31:12.287261 run iperf3-srv_10.42.42.10(pid=2829): Launched 22:31:12.473984 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:31:12.601349 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:31:12.916706 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2830): Launched 22:31:13.179010 run iperf3-srv_10.42.42.10(pid=2831): Launched 22:31:13.365298 tst cs_paging_gprs_active.py:38: start network... 22:31:13.492785 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:31:13.974235 run create_hlr_db(pid=2832): Launched 22:31:14.150051 bus /gobi_6: Setting Powered False 22:31:15.171279 run create_hlr_db(pid=2832): Terminated: ok {rc=0} 22:31:15.603828 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2834): Launched 22:31:16.001693 run osmo-hlr_10.42.42.2(pid=2835): Launched 22:31:16.257396 run osmo-stp_10.42.42.5: Starting osmo-stp 22:31:16.892889 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2837): Launched 22:31:17.246901 run osmo-stp_10.42.42.5(pid=2838): Launched 22:31:17.433263 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:31:18.005399 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2840): Launched 22:31:18.121971 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:31:18.405834 run patchelf(pid=2841): Launched 22:31:18.596820 run osmo-stp_10.42.42.5(pid=2838): ERR: Terminated: ERROR {rc=1} [trial-2383↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2838)] 22:31:18.738350 run osmo-stp_10.42.42.5(pid=2838): stdout: | (launched: 2022-12-12_22:31:17.053518) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:31:18.878622 run osmo-stp_10.42.42.5(pid=2838): stderr: | �[0;m�[38;5;43m20221212223117367 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212223117367 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212223117373 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212223117374 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212223117374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212223117374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212223117374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:31:19.014389 run osmo-stp_10.42.42.5(pid=2838): stdout: | (launched: 2022-12-12_22:31:17.053518) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:31:19.148538 run osmo-stp_10.42.42.5(pid=2838): stderr: | �[0;m�[38;5;43m20221212223117367 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212223117367 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212223117373 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212223117374 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212223117374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212223117374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212223117374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:31:19.304584 run patchelf(pid=2841): Terminating (SIGINT) 22:31:19.488324 run patchelf(pid=2841): Terminated: ok {rc=0} 22:31:19.521981 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2838): Process ended prematurely: osmo-stp_10.42.42.5(pid=2838) [trial-2383↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2838)] [trial-2383↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 22:31:19.531813 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 22:31:19.594073 run osmo-hlr_10.42.42.2(pid=2835): ERR: Terminated: ERROR {rc=237} [trial-2383↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2835)] 22:31:19.645027 run osmo-hlr_10.42.42.2(pid=2835): stdout: | (launched: 2022-12-12_22:31:15.769937) 22:31:19.696914 run osmo-hlr_10.42.42.2(pid=2835): stderr: | �[0;m�[1;31m20221212223116113 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212223116113 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212223116113 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212223116113 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212223116113 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212223116113 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212223116139 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212223116156 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212223116156 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212223116156 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:31:19.741231 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2828): Terminating (SIGTERM) 22:31:19.782584 run iperf3-srv_10.42.42.10(pid=2829): Terminating (SIGTERM) 22:31:19.823891 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2830): Terminating (SIGTERM) 22:31:19.865156 run iperf3-srv_10.42.42.10(pid=2831): Terminating (SIGTERM) 22:31:19.906421 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2834): Terminating (SIGTERM) 22:31:19.947944 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2837): Terminating (SIGTERM) 22:31:19.989721 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2840): Terminating (SIGTERM) 22:31:19.999329 --- ParallelTerminationStrategy: PID 2828 died... 22:31:20.054516 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2828): Terminated: ok {rc=0} 22:31:20.064374 --- ParallelTerminationStrategy: PID 2829 died... 22:31:20.119265 run iperf3-srv_10.42.42.10(pid=2829): Terminated {rc=256} 22:31:20.129179 --- ParallelTerminationStrategy: PID 2830 died... 22:31:20.183871 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2830): Terminated: ok {rc=0} 22:31:20.193924 --- ParallelTerminationStrategy: PID 2831 died... 22:31:20.248260 run iperf3-srv_10.42.42.10(pid=2831): Terminated {rc=256} 22:31:20.258043 --- ParallelTerminationStrategy: PID 2834 died... 22:31:20.312522 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2834): Terminated: ok {rc=0} 22:31:20.322355 --- ParallelTerminationStrategy: PID 2837 died... 22:31:20.377015 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2837): Terminated: ok {rc=0} 22:31:20.386908 --- ParallelTerminationStrategy: PID 2840 died... 22:31:20.441774 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2840): Terminated: ok {rc=0} 22:31:20.527811 bus /gobi_0: Setting Powered False 22:31:21.634614 bus /gobi_0: Setting Powered False 22:31:22.741924 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2838): Process ended prematurely: osmo-stp_10.42.42.5(pid=2838) [trial-2383↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2838)]