Failed
gprs:trx-b200+mod-bts0-egprs.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=2750): Process ended prematurely: osmo-stp_10.42.42.5(pid=2750) [trial-2383↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2750)]
Standard Output
---------------------------------------------- trial-2383 gprs:trx-b200+mod-bts0-egprs ping_idle_ping.py ---------------------------------------------- 22:30:01.022452 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:30:01.035320 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 22:30:01.189393 tst ping_idle_ping.py: using LAC 31937 22:30:01.323317 tst ping_idle_ping.py: using RAC 62 22:30:01.453418 tst ping_idle_ping.py: using CellId 31937 22:30:01.601975 tst ping_idle_ping.py: using BVCI 31938 22:30:01.630173 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:30:01.642110 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:30:01.653668 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:30:01.665799 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:30:01.677656 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:30:01.689298 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:30:01.701111 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:30:01.712782 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 22:30:02.067533 tst ping_idle_ping.py:24: start network... 22:30:02.218385 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:30:02.735548 run create_hlr_db(pid=2744): Launched 22:30:02.922133 bus /gobi_6: Setting Powered False 22:30:03.941517 run create_hlr_db(pid=2744): Terminated: ok {rc=0} 22:30:04.344712 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2746): Launched 22:30:04.647962 run osmo-hlr_10.42.42.2(pid=2747): Launched 22:30:04.767098 run osmo-stp_10.42.42.5: Starting osmo-stp 22:30:05.299180 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2749): Launched 22:30:05.601734 run osmo-stp_10.42.42.5(pid=2750): Launched 22:30:05.712592 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:30:06.236152 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2752): Launched 22:30:06.343256 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:30:06.606103 run patchelf(pid=2753): Launched 22:30:06.783145 run osmo-stp_10.42.42.5(pid=2750): ERR: Terminated: ERROR {rc=1} [trial-2383↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2750)] 22:30:06.912176 run osmo-stp_10.42.42.5(pid=2750): stdout: | (launched: 2022-12-12_22:30:05.451734) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:30:07.042071 run osmo-stp_10.42.42.5(pid=2750): stderr: | �[0;m�[38;5;43m20221212223005624 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212223005624 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212223005624 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212223005625 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212223005625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212223005625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212223005625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:30:07.167030 run osmo-stp_10.42.42.5(pid=2750): stdout: | (launched: 2022-12-12_22:30:05.451734) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:30:07.290633 run osmo-stp_10.42.42.5(pid=2750): stderr: | �[0;m�[38;5;43m20221212223005624 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212223005624 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212223005624 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212223005625 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212223005625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212223005625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212223005625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:30:07.436101 run patchelf(pid=2753): Terminating (SIGINT) 22:30:07.607648 run patchelf(pid=2753): Terminated: ok {rc=0} 22:30:07.638690 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=2750): Process ended prematurely: osmo-stp_10.42.42.5(pid=2750) [trial-2383↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2750)] [trial-2383↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27] 22:30:07.647302 tst ping_idle_ping.py:27: Test FAILED (6.6 sec) 22:30:07.707478 run osmo-hlr_10.42.42.2(pid=2747): ERR: Terminated: ERROR {rc=237} [trial-2383↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2747)] 22:30:07.756493 run osmo-hlr_10.42.42.2(pid=2747): stdout: | (launched: 2022-12-12_22:30:04.497306) 22:30:07.806090 run osmo-hlr_10.42.42.2(pid=2747): stderr: | �[0;m�[1;31m20221212223004671 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212223004671 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212223004671 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212223004672 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212223004672 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212223004672 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212223004684 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:trx-b200+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212223004693 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212223004693 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212223004693 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:30:07.848107 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2746): Terminating (SIGTERM) 22:30:07.887774 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2749): Terminating (SIGTERM) 22:30:07.927313 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2752): Terminating (SIGTERM) 22:30:07.936777 --- ParallelTerminationStrategy: PID 2746 died... 22:30:07.990044 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2746): Terminated: ok {rc=0} 22:30:07.999487 --- ParallelTerminationStrategy: PID 2749 died... 22:30:08.053101 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2749): Terminated: ok {rc=0} 22:30:08.062614 --- ParallelTerminationStrategy: PID 2752 died... 22:30:08.115886 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2752): Terminated: ok {rc=0} 22:30:08.203547 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2750): Process ended prematurely: osmo-stp_10.42.42.5(pid=2750) [trial-2383↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2750)]