Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=3723): Process ended prematurely: osmo-stp_10.42.42.5(pid=3723) [trial-2383↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3723)]
Standard Output
---------------------------------------------- trial-2383 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 22:40:05.031956 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:40:05.043038 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 22:40:05.208523 tst cs_paging_gprs_active.py: using LAC 31990 22:40:05.339115 tst cs_paging_gprs_active.py: using RAC 115 22:40:05.469406 tst cs_paging_gprs_active.py: using CellId 31990 22:40:05.599212 tst cs_paging_gprs_active.py: using BVCI 31991 22:40:05.624271 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:40:05.635755 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:40:05.647078 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:40:05.658416 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:40:05.670137 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:40:05.681334 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:40:05.692693 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:40:05.703900 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:40:05.715296 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:40:05.834530 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:40:06.117370 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:40:06.245669 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:40:06.562293 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3713): Launched 22:40:06.825688 run iperf3-srv_10.42.42.10(pid=3714): Launched 22:40:07.012455 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:40:07.139980 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:40:07.455842 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3715): Launched 22:40:07.718007 run iperf3-srv_10.42.42.10(pid=3716): Launched 22:40:07.904194 tst cs_paging_gprs_active.py:38: start network... 22:40:08.031739 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:40:08.512609 run create_hlr_db(pid=3717): Launched 22:40:08.688895 bus /gobi_6: Setting Powered False 22:40:09.708046 run create_hlr_db(pid=3717): Terminated: ok {rc=0} 22:40:10.139124 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3719): Launched 22:40:10.464932 run osmo-hlr_10.42.42.2(pid=3720): Launched 22:40:10.587317 run osmo-stp_10.42.42.5: Starting osmo-stp 22:40:11.151865 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3722): Launched 22:40:11.477716 run osmo-stp_10.42.42.5(pid=3723): Launched 22:40:11.596816 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:40:12.164917 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3725): Launched 22:40:12.281877 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:40:12.565772 run patchelf(pid=3726): Launched 22:40:12.755643 run osmo-stp_10.42.42.5(pid=3723): ERR: Terminated: ERROR {rc=1} [trial-2383↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3723)] 22:40:12.894588 run osmo-stp_10.42.42.5(pid=3723): stdout: | (launched: 2022-12-12_22:40:11.317818) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:40:13.034052 run osmo-stp_10.42.42.5(pid=3723): stderr: | �[0;m�[38;5;43m20221212224011512 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212224011512 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212224011512 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212224011513 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212224011513 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212224011513 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212224011513 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:40:13.168682 run osmo-stp_10.42.42.5(pid=3723): stdout: | (launched: 2022-12-12_22:40:11.317818) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:40:13.302600 run osmo-stp_10.42.42.5(pid=3723): stderr: | �[0;m�[38;5;43m20221212224011512 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212224011512 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212224011512 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212224011513 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212224011513 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212224011513 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212224011513 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:40:13.458178 run patchelf(pid=3726): Terminating (SIGINT) 22:40:13.641029 run patchelf(pid=3726): Terminated: ok {rc=0} 22:40:13.674397 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=3723): Process ended prematurely: osmo-stp_10.42.42.5(pid=3723) [trial-2383↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3723)] [trial-2383↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 22:40:13.684219 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 22:40:13.746718 run osmo-hlr_10.42.42.2(pid=3720): ERR: Terminated: ERROR {rc=237} [trial-2383↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3720)] 22:40:13.798045 run osmo-hlr_10.42.42.2(pid=3720): stdout: | (launched: 2022-12-12_22:40:10.306163) 22:40:13.850160 run osmo-hlr_10.42.42.2(pid=3720): stderr: | �[0;m�[1;31m20221212224010507 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212224010507 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212224010507 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212224010507 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212224010507 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212224010507 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212224010518 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212224010526 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212224010526 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212224010526 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:40:13.894357 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3713): Terminating (SIGTERM) 22:40:13.936028 run iperf3-srv_10.42.42.10(pid=3714): Terminating (SIGTERM) 22:40:13.978539 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3715): Terminating (SIGTERM) 22:40:14.020275 run iperf3-srv_10.42.42.10(pid=3716): Terminating (SIGTERM) 22:40:14.062150 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3719): Terminating (SIGTERM) 22:40:14.103709 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3722): Terminating (SIGTERM) 22:40:14.145280 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3725): Terminating (SIGTERM) 22:40:14.154908 --- ParallelTerminationStrategy: PID 3713 died... 22:40:14.210621 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3713): Terminated: ok {rc=0} 22:40:14.220425 --- ParallelTerminationStrategy: PID 3714 died... 22:40:14.275667 run iperf3-srv_10.42.42.10(pid=3714): Terminated {rc=256} 22:40:14.285996 --- ParallelTerminationStrategy: PID 3715 died... 22:40:14.341648 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3715): Terminated: ok {rc=0} 22:40:14.351560 --- ParallelTerminationStrategy: PID 3716 died... 22:40:14.406279 run iperf3-srv_10.42.42.10(pid=3716): Terminated {rc=256} 22:40:14.416072 --- ParallelTerminationStrategy: PID 3719 died... 22:40:14.471023 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3719): Terminated: ok {rc=0} 22:40:14.481122 --- ParallelTerminationStrategy: PID 3722 died... 22:40:14.536077 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3722): Terminated: ok {rc=0} 22:40:14.546479 --- ParallelTerminationStrategy: PID 3725 died... 22:40:14.601803 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3725): Terminated: ok {rc=0} 22:40:14.686484 bus /gobi_0: Setting Powered False 22:40:15.790759 bus /gobi_0: Setting Powered False 22:40:16.916380 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3723): Process ended prematurely: osmo-stp_10.42.42.5(pid=3723) [trial-2383↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3723)]