Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=11359): Process ended prematurely: osmo-stp_10.42.42.5(pid=11359) [trial-2384↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11359)]
Standard Output
---------------------------------------------- trial-2384 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 00:24:40.750124 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:24:40.761655 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 00:24:40.894252 tst cs_paging_gprs_active.py: using LAC 32348 00:24:41.022869 tst cs_paging_gprs_active.py: using RAC 218 00:24:41.149231 tst cs_paging_gprs_active.py: using CellId 32348 00:24:41.275095 tst cs_paging_gprs_active.py: using BVCI 32349 00:24:41.300032 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:24:41.311387 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:24:41.322519 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:24:41.333774 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:24:41.344880 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:24:41.356111 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:24:41.367624 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:24:41.378858 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:24:41.390370 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:24:41.509939 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:24:41.805705 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:24:41.942817 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:24:42.279821 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11349): Launched 00:24:42.560711 run iperf3-srv_10.42.42.10(pid=11350): Launched 00:24:42.760033 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:24:42.896609 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:24:43.234135 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11351): Launched 00:24:43.515737 run iperf3-srv_10.42.42.10(pid=11352): Launched 00:24:43.714930 tst cs_paging_gprs_active.py:38: start network... 00:24:43.851397 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:24:44.367116 run create_hlr_db(pid=11353): Launched 00:24:44.554970 bus /gobi_6: Setting Powered False 00:24:45.577371 run create_hlr_db(pid=11353): Terminated: ok {rc=0} 00:24:46.016632 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11355): Launched 00:24:46.449319 run osmo-hlr_10.42.42.2(pid=11356): Launched 00:24:46.592093 run osmo-stp_10.42.42.5: Starting osmo-stp 00:24:47.250069 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11358): Launched 00:24:47.579414 run osmo-stp_10.42.42.5(pid=11359): Launched 00:24:47.698996 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:24:48.269808 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11361): Launched 00:24:48.385933 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:24:48.671514 run patchelf(pid=11362): Launched 00:24:48.861974 run osmo-stp_10.42.42.5(pid=11359): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11359)] 00:24:49.001184 run osmo-stp_10.42.42.5(pid=11359): stdout: | (launched: 2022-12-13_00:24:47.416574) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:24:49.141091 run osmo-stp_10.42.42.5(pid=11359): stderr: | �[0;m�[38;5;43m20221213002447612 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213002447612 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213002447612 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213002447613 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213002447613 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213002447613 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213002447613 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:24:49.276317 run osmo-stp_10.42.42.5(pid=11359): stdout: | (launched: 2022-12-13_00:24:47.416574) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:24:49.410817 run osmo-stp_10.42.42.5(pid=11359): stderr: | �[0;m�[38;5;43m20221213002447612 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213002447612 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213002447612 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213002447613 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213002447613 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213002447613 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213002447613 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:24:49.567327 run patchelf(pid=11362): Terminating (SIGINT) 00:24:49.751596 run patchelf(pid=11362): Terminated: ok {rc=0} 00:24:49.785436 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11359): Process ended prematurely: osmo-stp_10.42.42.5(pid=11359) [trial-2384↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11359)] [trial-2384↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 00:24:49.795344 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 00:24:49.859756 run osmo-hlr_10.42.42.2(pid=11356): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11356)] 00:24:49.911777 run osmo-hlr_10.42.42.2(pid=11356): stdout: | (launched: 2022-12-13_00:24:46.186451) 00:24:49.964121 run osmo-hlr_10.42.42.2(pid=11356): stderr: | �[0;m�[1;31m20221213002446520 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213002446520 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213002446520 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213002446520 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213002446520 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213002446520 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213002446544 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213002446556 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213002446556 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213002446556 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:24:50.009024 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11349): Terminating (SIGTERM) 00:24:50.051566 run iperf3-srv_10.42.42.10(pid=11350): Terminating (SIGTERM) 00:24:50.093709 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11351): Terminating (SIGTERM) 00:24:50.135850 run iperf3-srv_10.42.42.10(pid=11352): Terminating (SIGTERM) 00:24:50.178652 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11355): Terminating (SIGTERM) 00:24:50.221231 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11358): Terminating (SIGTERM) 00:24:50.263958 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11361): Terminating (SIGTERM) 00:24:50.273795 --- ParallelTerminationStrategy: PID 11349 died... 00:24:50.330117 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11349): Terminated: ok {rc=0} 00:24:50.340363 --- ParallelTerminationStrategy: PID 11350 died... 00:24:50.396004 run iperf3-srv_10.42.42.10(pid=11350): Terminated {rc=256} 00:24:50.406341 --- ParallelTerminationStrategy: PID 11351 died... 00:24:50.462164 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11351): Terminated: ok {rc=0} 00:24:50.472316 --- ParallelTerminationStrategy: PID 11352 died... 00:24:50.528325 run iperf3-srv_10.42.42.10(pid=11352): Terminated {rc=256} 00:24:50.538361 --- ParallelTerminationStrategy: PID 11355 died... 00:24:50.593913 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11355): Terminated: ok {rc=0} 00:24:50.604288 --- ParallelTerminationStrategy: PID 11358 died... 00:24:50.660410 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11358): Terminated: ok {rc=0} 00:24:50.670555 --- ParallelTerminationStrategy: PID 11361 died... 00:24:50.726555 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11361): Terminated: ok {rc=0} 00:24:50.813626 bus /gobi_0: Setting Powered False 00:24:51.921522 bus /gobi_0: Setting Powered False 00:24:53.029188 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11359): Process ended prematurely: osmo-stp_10.42.42.5(pid=11359) [trial-2384↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11359)]