Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=12025): Process ended prematurely: osmo-stp_10.42.42.5(pid=12025) [trial-2384↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12025)]
Standard Output
---------------------------------------------- trial-2384 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 00:34:15.772777 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:34:15.783584 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 00:34:15.973677 tst cs_paging_gprs_active.py: using LAC 32399 00:34:16.103476 tst cs_paging_gprs_active.py: using RAC 14 00:34:16.272155 tst cs_paging_gprs_active.py: using CellId 32399 00:34:16.416179 tst cs_paging_gprs_active.py: using BVCI 32400 00:34:16.442743 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:34:16.455109 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:34:16.468004 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:34:16.480316 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:34:16.494693 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:34:16.508050 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:34:16.522490 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:34:16.536205 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:34:16.548590 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:34:16.691480 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:34:17.007224 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:34:17.138960 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:34:17.459906 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12015): Launched 00:34:17.722691 run iperf3-srv_10.42.42.10(pid=12016): Launched 00:34:17.908034 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:34:18.034343 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:34:18.349707 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12017): Launched 00:34:18.621615 run iperf3-srv_10.42.42.10(pid=12018): Launched 00:34:18.823527 tst cs_paging_gprs_active.py:38: start network... 00:34:18.961433 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:34:19.481399 run create_hlr_db(pid=12019): Launched 00:34:19.671097 bus /gobi_6: Setting Powered False 00:34:20.692907 run create_hlr_db(pid=12019): Terminated: ok {rc=0} 00:34:21.130344 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12021): Launched 00:34:21.459704 run osmo-hlr_10.42.42.2(pid=12022): Launched 00:34:21.586206 run osmo-stp_10.42.42.5: Starting osmo-stp 00:34:22.162736 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12024): Launched 00:34:22.493463 run osmo-stp_10.42.42.5(pid=12025): Launched 00:34:22.613185 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:34:23.187592 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12027): Launched 00:34:23.305698 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:34:23.593785 run patchelf(pid=12028): Launched 00:34:23.786480 run osmo-stp_10.42.42.5(pid=12025): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12025)] 00:34:23.927088 run osmo-stp_10.42.42.5(pid=12025): stdout: | (launched: 2022-12-13_00:34:22.330702) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:34:24.067733 run osmo-stp_10.42.42.5(pid=12025): stderr: | �[0;m�[38;5;43m20221213003422520 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213003422520 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213003422520 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213003422521 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213003422522 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213003422522 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213003422522 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:34:24.204631 run osmo-stp_10.42.42.5(pid=12025): stdout: | (launched: 2022-12-13_00:34:22.330702) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:34:24.340162 run osmo-stp_10.42.42.5(pid=12025): stderr: | �[0;m�[38;5;43m20221213003422520 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213003422520 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213003422520 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213003422521 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213003422522 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213003422522 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213003422522 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:34:24.497681 run patchelf(pid=12028): Terminating (SIGINT) 00:34:24.682519 run patchelf(pid=12028): Terminated: ok {rc=0} 00:34:24.716113 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12025): Process ended prematurely: osmo-stp_10.42.42.5(pid=12025) [trial-2384↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12025)] [trial-2384↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 00:34:24.726008 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 00:34:24.790007 run osmo-hlr_10.42.42.2(pid=12022): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12022)] 00:34:24.842104 run osmo-hlr_10.42.42.2(pid=12022): stdout: | (launched: 2022-12-13_00:34:21.298250) 00:34:24.894910 run osmo-hlr_10.42.42.2(pid=12022): stderr: | �[0;m�[1;31m20221213003421491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213003421491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213003421491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213003421491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213003421491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213003421491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213003421503 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213003421511 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213003421511 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213003421512 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:34:24.939792 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12015): Terminating (SIGTERM) 00:34:24.982416 run iperf3-srv_10.42.42.10(pid=12016): Terminating (SIGTERM) 00:34:25.024784 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12017): Terminating (SIGTERM) 00:34:25.067180 run iperf3-srv_10.42.42.10(pid=12018): Terminating (SIGTERM) 00:34:25.109662 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12021): Terminating (SIGTERM) 00:34:25.152390 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12024): Terminating (SIGTERM) 00:34:25.195023 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12027): Terminating (SIGTERM) 00:34:25.205071 --- ParallelTerminationStrategy: PID 12015 died... 00:34:25.262022 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12015): Terminated: ok {rc=0} 00:34:25.272084 --- ParallelTerminationStrategy: PID 12016 died... 00:34:25.328115 run iperf3-srv_10.42.42.10(pid=12016): Terminated {rc=256} 00:34:25.338491 --- ParallelTerminationStrategy: PID 12017 died... 00:34:25.395404 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12017): Terminated: ok {rc=0} 00:34:25.405503 --- ParallelTerminationStrategy: PID 12018 died... 00:34:25.461455 run iperf3-srv_10.42.42.10(pid=12018): Terminated {rc=256} 00:34:25.471544 --- ParallelTerminationStrategy: PID 12021 died... 00:34:25.528221 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12021): Terminated: ok {rc=0} 00:34:25.538220 --- ParallelTerminationStrategy: PID 12024 died... 00:34:25.594107 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12024): Terminated: ok {rc=0} 00:34:25.604417 --- ParallelTerminationStrategy: PID 12027 died... 00:34:25.660289 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12027): Terminated: ok {rc=0} 00:34:25.748498 bus /gobi_0: Setting Powered False 00:34:26.851850 bus /gobi_0: Setting Powered False 00:34:27.958456 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12025): Process ended prematurely: osmo-stp_10.42.42.5(pid=12025) [trial-2384↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12025)]