Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=15335): Process ended prematurely: osmo-stp_10.42.42.5(pid=15335) [trial-2384↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15335)]
Standard Output
---------------------------------------------- trial-2384 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 01:06:29.590035 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:06:29.601057 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 01:06:29.733250 tst cs_paging_gprs_active.py: using LAC 32569 01:06:29.852627 tst cs_paging_gprs_active.py: using RAC 184 01:06:29.970258 tst cs_paging_gprs_active.py: using CellId 32569 01:06:30.088366 tst cs_paging_gprs_active.py: using BVCI 32570 01:06:30.111863 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:06:30.122707 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:06:30.133412 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:06:30.143999 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:06:30.154511 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:06:30.165027 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:06:30.175699 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:06:30.186205 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:06:30.196784 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 01:06:30.312664 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 01:06:30.610421 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:06:30.748578 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:06:31.116625 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15325): Launched 01:06:31.406552 run iperf3-srv_10.42.42.10(pid=15326): Launched 01:06:31.613191 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:06:31.754781 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:06:32.124484 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15327): Launched 01:06:32.420527 run iperf3-srv_10.42.42.10(pid=15328): Launched 01:06:32.606921 tst cs_paging_gprs_active.py:38: start network... 01:06:32.733684 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:06:33.226180 run create_hlr_db(pid=15329): Launched 01:06:33.401162 bus /sierra_2: Setting Powered False 01:06:34.423656 run create_hlr_db(pid=15329): Terminated: ok {rc=0} 01:06:34.830873 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15331): Launched 01:06:35.137498 run osmo-hlr_10.42.42.2(pid=15332): Launched 01:06:35.252748 run osmo-stp_10.42.42.5: Starting osmo-stp 01:06:35.788319 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15334): Launched 01:06:36.096260 run osmo-stp_10.42.42.5(pid=15335): Launched 01:06:36.206830 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:06:36.743066 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15337): Launched 01:06:36.852294 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:06:37.121754 run patchelf(pid=15338): Launched 01:06:37.302890 run osmo-stp_10.42.42.5(pid=15335): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15335)] 01:06:37.433881 run osmo-stp_10.42.42.5(pid=15335): stdout: | (launched: 2022-12-13_01:06:35.944191) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:06:37.565162 run osmo-stp_10.42.42.5(pid=15335): stderr: | �[0;m�[38;5;43m20221213010636113 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213010636113 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213010636113 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213010636114 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213010636114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213010636114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213010636114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:06:37.692517 run osmo-stp_10.42.42.5(pid=15335): stdout: | (launched: 2022-12-13_01:06:35.944191) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:06:37.818332 run osmo-stp_10.42.42.5(pid=15335): stderr: | �[0;m�[38;5;43m20221213010636113 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213010636113 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213010636113 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213010636114 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213010636114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213010636114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213010636114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:06:37.965323 run patchelf(pid=15338): Terminating (SIGINT) 01:06:38.138809 run patchelf(pid=15338): Terminated: ok {rc=0} 01:06:38.170624 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=15335): Process ended prematurely: osmo-stp_10.42.42.5(pid=15335) [trial-2384↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15335)] [trial-2384↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 01:06:38.179763 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 01:06:38.239722 run osmo-hlr_10.42.42.2(pid=15332): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15332)] 01:06:38.288529 run osmo-hlr_10.42.42.2(pid=15332): stdout: | (launched: 2022-12-13_01:06:34.986534) 01:06:38.337969 run osmo-hlr_10.42.42.2(pid=15332): stderr: | �[0;m�[1;31m20221213010635162 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213010635162 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213010635162 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213010635162 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213010635162 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213010635162 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213010635174 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213010635183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213010635183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213010635183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:06:38.380094 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15325): Terminating (SIGTERM) 01:06:38.419583 run iperf3-srv_10.42.42.10(pid=15326): Terminating (SIGTERM) 01:06:38.459129 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15327): Terminating (SIGTERM) 01:06:38.498605 run iperf3-srv_10.42.42.10(pid=15328): Terminating (SIGTERM) 01:06:38.538194 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15331): Terminating (SIGTERM) 01:06:38.577820 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15334): Terminating (SIGTERM) 01:06:38.617473 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15337): Terminating (SIGTERM) 01:06:38.626787 --- ParallelTerminationStrategy: PID 15325 died... 01:06:38.679972 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15325): Terminated: ok {rc=0} 01:06:38.689748 --- ParallelTerminationStrategy: PID 15326 died... 01:06:38.742793 run iperf3-srv_10.42.42.10(pid=15326): Terminated {rc=256} 01:06:38.752395 --- ParallelTerminationStrategy: PID 15327 died... 01:06:38.805090 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15327): Terminated: ok {rc=0} 01:06:38.814671 --- ParallelTerminationStrategy: PID 15328 died... 01:06:38.867143 run iperf3-srv_10.42.42.10(pid=15328): Terminated {rc=256} 01:06:38.876809 --- ParallelTerminationStrategy: PID 15331 died... 01:06:38.929337 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15331): Terminated: ok {rc=0} 01:06:38.939014 --- ParallelTerminationStrategy: PID 15334 died... 01:06:38.992311 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15334): Terminated: ok {rc=0} 01:06:39.001982 --- ParallelTerminationStrategy: PID 15337 died... 01:06:39.054523 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15337): Terminated: ok {rc=0} 01:06:39.142992 bus /gobi_0: Setting Powered False 01:06:40.246300 bus /gobi_0: Setting Powered False 01:06:41.356838 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15335): Process ended prematurely: osmo-stp_10.42.42.5(pid=15335) [trial-2384↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15335)]