Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=12928): Process ended prematurely: osmo-stp_10.42.42.5(pid=12928) [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12928)]
Standard Output
---------------------------------------------- trial-2384 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 00:43:16.214317 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:43:16.226563 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 00:43:16.422071 tst cs_paging_gprs_active.py: using LAC 32446 00:43:16.580892 tst cs_paging_gprs_active.py: using RAC 61 00:43:16.753762 tst cs_paging_gprs_active.py: using CellId 32446 00:43:16.881317 tst cs_paging_gprs_active.py: using BVCI 32447 00:43:16.906086 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:43:16.918432 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:43:16.930427 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:43:16.942557 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:43:16.954435 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:43:16.966079 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:43:16.977803 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:43:16.990346 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:43:17.002301 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:43:17.122364 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:43:17.426003 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:43:17.564910 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:43:17.906679 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12918): Launched 00:43:18.191120 run iperf3-srv_10.42.42.10(pid=12919): Launched 00:43:18.394233 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:43:18.532812 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:43:18.874094 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12920): Launched 00:43:19.158166 run iperf3-srv_10.42.42.10(pid=12921): Launched 00:43:19.360695 tst cs_paging_gprs_active.py:38: start network... 00:43:19.499552 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:43:20.022636 run create_hlr_db(pid=12922): Launched 00:43:20.214296 bus /gobi_6: Setting Powered False 00:43:21.234912 run create_hlr_db(pid=12922): Terminated: ok {rc=0} 00:43:21.649566 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12924): Launched 00:43:21.959911 run osmo-hlr_10.42.42.2(pid=12925): Launched 00:43:22.082163 run osmo-stp_10.42.42.5: Starting osmo-stp 00:43:22.621892 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12927): Launched 00:43:22.931597 run osmo-stp_10.42.42.5(pid=12928): Launched 00:43:23.044626 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:43:23.585806 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12930): Launched 00:43:23.695723 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:43:23.964690 run patchelf(pid=12931): Launched 00:43:24.144469 run osmo-stp_10.42.42.5(pid=12928): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12928)] 00:43:24.275734 run osmo-stp_10.42.42.5(pid=12928): stdout: | (launched: 2022-12-13_00:43:22.779058) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:43:24.416671 run osmo-stp_10.42.42.5(pid=12928): stderr: | �[0;m�[38;5;43m20221213004322947 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213004322947 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213004322947 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213004322948 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213004322948 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213004322949 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213004322949 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:43:24.553836 run osmo-stp_10.42.42.5(pid=12928): stdout: | (launched: 2022-12-13_00:43:22.779058) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:43:24.689414 run osmo-stp_10.42.42.5(pid=12928): stderr: | �[0;m�[38;5;43m20221213004322947 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213004322947 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213004322947 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213004322948 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213004322948 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213004322949 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213004322949 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:43:24.847392 run patchelf(pid=12931): Terminating (SIGINT) 00:43:25.033076 run patchelf(pid=12931): Terminated: ok {rc=0} 00:43:25.067265 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12928): Process ended prematurely: osmo-stp_10.42.42.5(pid=12928) [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12928)] [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 00:43:25.077565 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 00:43:25.142290 run osmo-hlr_10.42.42.2(pid=12925): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12925)] 00:43:25.194703 run osmo-hlr_10.42.42.2(pid=12925): stdout: | (launched: 2022-12-13_00:43:21.806912) 00:43:25.247539 run osmo-hlr_10.42.42.2(pid=12925): stderr: | �[0;m�[1;31m20221213004321982 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213004321982 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213004321982 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213004321982 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213004321982 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213004321982 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213004321995 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213004322004 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213004322004 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213004322004 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:43:25.292845 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12918): Terminating (SIGTERM) 00:43:25.336166 run iperf3-srv_10.42.42.10(pid=12919): Terminating (SIGTERM) 00:43:25.378739 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12920): Terminating (SIGTERM) 00:43:25.422047 run iperf3-srv_10.42.42.10(pid=12921): Terminating (SIGTERM) 00:43:25.465086 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12924): Terminating (SIGTERM) 00:43:25.508024 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12927): Terminating (SIGTERM) 00:43:25.551985 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12930): Terminating (SIGTERM) 00:43:25.562110 --- ParallelTerminationStrategy: PID 12918 died... 00:43:25.619247 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12918): Terminated: ok {rc=0} 00:43:25.630005 --- ParallelTerminationStrategy: PID 12919 died... 00:43:25.687160 run iperf3-srv_10.42.42.10(pid=12919): Terminated {rc=256} 00:43:25.697429 --- ParallelTerminationStrategy: PID 12920 died... 00:43:25.754296 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12920): Terminated: ok {rc=0} 00:43:25.764734 --- ParallelTerminationStrategy: PID 12921 died... 00:43:25.821834 run iperf3-srv_10.42.42.10(pid=12921): Terminated {rc=256} 00:43:25.831947 --- ParallelTerminationStrategy: PID 12924 died... 00:43:25.889343 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12924): Terminated: ok {rc=0} 00:43:25.899670 --- ParallelTerminationStrategy: PID 12927 died... 00:43:25.956989 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12927): Terminated: ok {rc=0} 00:43:25.967313 --- ParallelTerminationStrategy: PID 12930 died... 00:43:26.024678 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12930): Terminated: ok {rc=0} 00:43:26.112336 bus /gobi_0: Setting Powered False 00:43:27.220177 bus /gobi_0: Setting Powered False 00:43:28.327867 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12928): Process ended prematurely: osmo-stp_10.42.42.5(pid=12928) [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12928)]