Failed
dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_trx-sysmocell5000+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=13077): Process ended prematurely: osmo-stp_10.42.42.5(pid=13077) [trial-2384↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13077)]
Standard Output
---------------------------------------------- trial-2384 dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 00:45:29.927280 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 00:45:29.939037 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 00:45:30.099689 tst switch_tch_pdch.py: using LAC 32457 00:45:30.221388 tst switch_tch_pdch.py: using RAC 72 00:45:30.340020 tst switch_tch_pdch.py: using CellId 32457 00:45:30.460790 tst switch_tch_pdch.py: using BVCI 32458 00:45:30.484120 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 00:45:30.495137 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 00:45:30.506001 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 00:45:30.516714 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 00:45:30.527901 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 00:45:30.538857 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 00:45:30.549850 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 00:45:30.560720 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 00:45:30.679212 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 00:45:30.977864 tst switch_tch_pdch.py:51: start network... 00:45:31.118268 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:45:31.640803 run create_hlr_db(pid=13071): Launched 00:45:31.768115 bus /gobi_6: Setting Powered False 00:45:32.836796 run create_hlr_db(pid=13071): Terminated: ok {rc=0} 00:45:33.215248 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13073): Launched 00:45:33.518069 run osmo-hlr_10.42.42.2(pid=13074): Launched 00:45:33.636281 run osmo-stp_10.42.42.5: Starting osmo-stp 00:45:34.142374 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13076): Launched 00:45:34.442906 run osmo-stp_10.42.42.5(pid=13077): Launched 00:45:34.556637 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:45:35.058953 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13079): Launched 00:45:35.166562 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:45:35.430194 run patchelf(pid=13080): Launched 00:45:35.607270 run osmo-stp_10.42.42.5(pid=13077): ERR: Terminated: ERROR {rc=1} [trial-2384↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13077)] 00:45:35.737776 run osmo-stp_10.42.42.5(pid=13077): stdout: | (launched: 2022-12-13_00:45:34.295015) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:45:35.867520 run osmo-stp_10.42.42.5(pid=13077): stderr: | �[0;m�[38;5;43m20221213004534464 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213004534464 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213004534464 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213004534464 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213004534465 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213004534465 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213004534465 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:45:35.992264 run osmo-stp_10.42.42.5(pid=13077): stdout: | (launched: 2022-12-13_00:45:34.295015) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:45:36.115803 run osmo-stp_10.42.42.5(pid=13077): stderr: | �[0;m�[38;5;43m20221213004534464 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213004534464 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213004534464 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213004534464 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213004534465 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213004534465 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213004534465 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:45:36.260813 run patchelf(pid=13080): Terminating (SIGINT) 00:45:36.432001 run patchelf(pid=13080): Terminated: ok {rc=0} 00:45:36.463230 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=13077): Process ended prematurely: osmo-stp_10.42.42.5(pid=13077) [trial-2384↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13077)] [trial-2384↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 00:45:36.471989 tst switch_tch_pdch.py:54: Test FAILED (6.5 sec) 00:45:36.531976 run osmo-hlr_10.42.42.2(pid=13074): ERR: Terminated: ERROR {rc=237} [trial-2384↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13074)] 00:45:36.580928 run osmo-hlr_10.42.42.2(pid=13074): stdout: | (launched: 2022-12-13_00:45:33.369485) 00:45:36.631036 run osmo-hlr_10.42.42.2(pid=13074): stderr: | �[0;m�[1;31m20221213004533542 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213004533542 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213004533542 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213004533542 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213004533542 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213004533542 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213004533554 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213004533563 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213004533564 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213004533564 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:45:36.673415 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13073): Terminating (SIGTERM) 00:45:36.713464 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13076): Terminating (SIGTERM) 00:45:36.753665 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13079): Terminating (SIGTERM) 00:45:36.763077 --- ParallelTerminationStrategy: PID 13073 died... 00:45:36.816817 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13073): Terminated: ok {rc=0} 00:45:36.826666 --- ParallelTerminationStrategy: PID 13076 died... 00:45:36.879873 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13076): Terminated: ok {rc=0} 00:45:36.889590 --- ParallelTerminationStrategy: PID 13079 died... 00:45:36.942686 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13079): Terminated: ok {rc=0} 00:45:37.026025 bus /gobi_0: Setting Powered False 00:45:38.133588 bus /gobi_0: Setting Powered False 00:45:39.242116 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13077): Process ended prematurely: osmo-stp_10.42.42.5(pid=13077) [trial-2384↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13077)]