Failed
dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=14513): Process ended prematurely: osmo-stp_10.42.42.5(pid=14513) [trial-2384↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14513)]
Standard Output
---------------------------------------------- trial-2384 dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 00:54:39.739067 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 00:54:39.750749 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 00:54:39.906908 tst switch_tch_pdch.py: using LAC 32505 00:54:40.028811 tst switch_tch_pdch.py: using RAC 120 00:54:40.149391 tst switch_tch_pdch.py: using CellId 32505 00:54:40.268564 tst switch_tch_pdch.py: using BVCI 32506 00:54:40.291758 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 00:54:40.302920 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 00:54:40.313890 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 00:54:40.325018 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 00:54:40.335955 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 00:54:40.346943 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 00:54:40.358089 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 00:54:40.369174 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 00:54:40.490424 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 00:54:40.771273 tst switch_tch_pdch.py:51: start network... 00:54:40.897506 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:54:41.385828 run create_hlr_db(pid=14507): Launched 00:54:41.560847 bus /gobi_6: Setting Powered False 00:54:42.581800 run create_hlr_db(pid=14507): Terminated: ok {rc=0} 00:54:43.015359 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14509): Launched 00:54:43.341769 run osmo-hlr_10.42.42.2(pid=14510): Launched 00:54:43.459794 run osmo-stp_10.42.42.5: Starting osmo-stp 00:54:44.025619 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14512): Launched 00:54:44.351533 run osmo-stp_10.42.42.5(pid=14513): Launched 00:54:44.473079 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:54:45.041140 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14515): Launched 00:54:45.156692 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:54:45.442468 run patchelf(pid=14516): Launched 00:54:45.632505 run osmo-stp_10.42.42.5(pid=14513): ERR: Terminated: ERROR {rc=1} [trial-2384↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14513)] 00:54:45.771561 run osmo-stp_10.42.42.5(pid=14513): stdout: | (launched: 2022-12-13_00:54:44.189712) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:54:45.915221 run osmo-stp_10.42.42.5(pid=14513): stderr: | �[0;m�[38;5;43m20221213005444382 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213005444382 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213005444383 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213005444383 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213005444384 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213005444384 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213005444384 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:54:46.055235 run osmo-stp_10.42.42.5(pid=14513): stdout: | (launched: 2022-12-13_00:54:44.189712) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:54:46.191294 run osmo-stp_10.42.42.5(pid=14513): stderr: | �[0;m�[38;5;43m20221213005444382 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213005444382 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213005444383 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213005444383 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213005444384 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213005444384 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213005444384 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:54:46.351482 run patchelf(pid=14516): Terminating (SIGINT) 00:54:46.538624 run patchelf(pid=14516): Terminated: ok {rc=0} 00:54:46.573005 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=14513): Process ended prematurely: osmo-stp_10.42.42.5(pid=14513) [trial-2384↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14513)] [trial-2384↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54] 00:54:46.583515 tst switch_tch_pdch.py:54: Test FAILED (6.8 sec) 00:54:46.651726 run osmo-hlr_10.42.42.2(pid=14510): ERR: Terminated: ERROR {rc=237} [trial-2384↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14510)] 00:54:46.706104 run osmo-hlr_10.42.42.2(pid=14510): stdout: | (launched: 2022-12-13_00:54:43.180090) 00:54:46.762046 run osmo-hlr_10.42.42.2(pid=14510): stderr: | �[0;m�[1;31m20221213005443378 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213005443378 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213005443378 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213005443378 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213005443378 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213005443378 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213005443391 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213005443401 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213005443401 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213005443401 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:54:46.808484 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14509): Terminating (SIGTERM) 00:54:46.856330 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14512): Terminating (SIGTERM) 00:54:46.900866 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14515): Terminating (SIGTERM) 00:54:46.913527 --- ParallelTerminationStrategy: PID 14509 died... 00:54:46.973591 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14509): Terminated: ok {rc=0} 00:54:46.984680 --- ParallelTerminationStrategy: PID 14512 died... 00:54:47.044686 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14512): Terminated: ok {rc=0} 00:54:47.055814 --- ParallelTerminationStrategy: PID 14515 died... 00:54:47.115384 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14515): Terminated: ok {rc=0} 00:54:47.206627 bus /gobi_0: Setting Powered False 00:54:48.310505 bus /gobi_0: Setting Powered False 00:54:49.422559 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14513): Process ended prematurely: osmo-stp_10.42.42.5(pid=14513) [trial-2384↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14513)]