Failed
dynts:trx-umtrx+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_trx-umtrx+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=14526): Process ended prematurely: osmo-stp_10.42.42.5(pid=14526) [trial-2384↪dynts:trx-umtrx+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14526)]
Standard Output
---------------------------------------------- trial-2384 dynts:trx-umtrx+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 00:54:51.397755 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 00:54:51.409445 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 00:54:51.576148 tst switch_tch_pdch.py: using LAC 32506 00:54:51.702556 tst switch_tch_pdch.py: using RAC 121 00:54:51.830270 tst switch_tch_pdch.py: using CellId 32506 00:54:51.961447 tst switch_tch_pdch.py: using BVCI 32507 00:54:51.986354 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 00:54:51.997882 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 00:54:52.009530 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 00:54:52.021233 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 00:54:52.032736 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 00:54:52.044293 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 00:54:52.056530 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 00:54:52.068390 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 00:54:52.189045 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 00:54:52.484778 tst switch_tch_pdch.py:51: start network... 00:54:52.619903 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:54:53.102541 run create_hlr_db(pid=14520): Launched 00:54:53.234385 bus /gobi_6: Setting Powered False 00:54:54.310577 run create_hlr_db(pid=14520): Terminated: ok {rc=0} 00:54:54.693557 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14522): Launched 00:54:54.997857 run osmo-hlr_10.42.42.2(pid=14523): Launched 00:54:55.112760 run osmo-stp_10.42.42.5: Starting osmo-stp 00:54:55.614302 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14525): Launched 00:54:55.917680 run osmo-stp_10.42.42.5(pid=14526): Launched 00:54:56.026767 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:54:56.529005 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14528): Launched 00:54:56.636002 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:54:56.902452 run patchelf(pid=14529): Launched 00:54:57.079497 run osmo-stp_10.42.42.5(pid=14526): ERR: Terminated: ERROR {rc=1} [trial-2384↪dynts:trx-umtrx+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14526)] 00:54:57.208856 run osmo-stp_10.42.42.5(pid=14526): stdout: | (launched: 2022-12-13_00:54:55.767466) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:54:57.338532 run osmo-stp_10.42.42.5(pid=14526): stderr: | �[0;m�[38;5;43m20221213005455941 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213005455942 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213005455942 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213005455942 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213005455943 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213005455943 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213005455943 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:54:57.463424 run osmo-stp_10.42.42.5(pid=14526): stdout: | (launched: 2022-12-13_00:54:55.767466) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:54:57.587266 run osmo-stp_10.42.42.5(pid=14526): stderr: | �[0;m�[38;5;43m20221213005455941 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213005455942 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213005455942 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213005455942 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213005455943 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213005455943 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213005455943 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:54:57.731618 run patchelf(pid=14529): Terminating (SIGINT) 00:54:57.902043 run patchelf(pid=14529): Terminated: ok {rc=0} 00:54:57.932853 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=14526): Process ended prematurely: osmo-stp_10.42.42.5(pid=14526) [trial-2384↪dynts:trx-umtrx+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14526)] [trial-2384↪dynts:trx-umtrx+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 00:54:57.941509 tst switch_tch_pdch.py:54: Test FAILED (6.5 sec) 00:54:58.001282 run osmo-hlr_10.42.42.2(pid=14523): ERR: Terminated: ERROR {rc=237} [trial-2384↪dynts:trx-umtrx+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14523)] 00:54:58.050408 run osmo-hlr_10.42.42.2(pid=14523): stdout: | (launched: 2022-12-13_00:54:54.846884) 00:54:58.100714 run osmo-hlr_10.42.42.2(pid=14523): stderr: | �[0;m�[1;31m20221213005455021 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213005455021 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213005455021 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213005455021 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213005455021 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213005455022 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213005455034 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/dynts:trx-umtrx+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213005455045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213005455045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213005455045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:54:58.143291 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14522): Terminating (SIGTERM) 00:54:58.183222 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14525): Terminating (SIGTERM) 00:54:58.223268 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14528): Terminating (SIGTERM) 00:54:58.232452 --- ParallelTerminationStrategy: PID 14522 died... 00:54:58.286201 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14522): Terminated: ok {rc=0} 00:54:58.295741 --- ParallelTerminationStrategy: PID 14525 died... 00:54:58.348827 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14525): Terminated: ok {rc=0} 00:54:58.358374 --- ParallelTerminationStrategy: PID 14528 died... 00:54:58.411539 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14528): Terminated: ok {rc=0} 00:54:58.495039 bus /gobi_0: Setting Powered False 00:54:59.597159 bus /gobi_0: Setting Powered False 00:55:00.709398 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14526): Process ended prematurely: osmo-stp_10.42.42.5(pid=14526) [trial-2384↪dynts:trx-umtrx+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14526)]