Failed
gprs:nanobts+band-1900+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_nanobts+band-1900+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=16292): Process ended prematurely: osmo-stp_10.42.42.5(pid=16292) [trial-2384↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16292)]
Standard Output
---------------------------------------------- trial-2384 gprs:nanobts+band-1900+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 01:16:38.538187 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:16:38.550074 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 01:16:38.695933 tst ping_idle_ping.py: using LAC 32621 01:16:38.815342 tst ping_idle_ping.py: using RAC 236 01:16:38.933837 tst ping_idle_ping.py: using CellId 32621 01:16:39.051270 tst ping_idle_ping.py: using BVCI 32622 01:16:39.074237 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:16:39.085320 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:16:39.096148 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:16:39.106989 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:16:39.117806 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:16:39.128549 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:16:39.139476 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:16:39.150228 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 01:16:39.441654 tst ping_idle_ping.py:24: start network... 01:16:39.575903 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:16:40.084733 run create_hlr_db(pid=16286): Launched 01:16:40.271885 bus /gobi_6: Setting Powered False 01:16:41.292491 run create_hlr_db(pid=16286): Terminated: ok {rc=0} 01:16:41.704622 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16288): Launched 01:16:42.029077 run osmo-hlr_10.42.42.2(pid=16289): Launched 01:16:42.148159 run osmo-stp_10.42.42.5: Starting osmo-stp 01:16:42.711259 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16291): Launched 01:16:43.033336 run osmo-stp_10.42.42.5(pid=16292): Launched 01:16:43.149357 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:16:43.713081 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16294): Launched 01:16:43.827512 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:16:44.109946 run patchelf(pid=16295): Launched 01:16:44.298467 run osmo-stp_10.42.42.5(pid=16292): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16292)] 01:16:44.436832 run osmo-stp_10.42.42.5(pid=16292): stdout: | (launched: 2022-12-13_01:16:42.874969) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:16:44.575351 run osmo-stp_10.42.42.5(pid=16292): stderr: | �[0;m�[38;5;43m20221213011643064 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213011643064 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213011643064 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213011643065 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213011643065 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213011643066 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213011643066 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:16:44.708701 run osmo-stp_10.42.42.5(pid=16292): stdout: | (launched: 2022-12-13_01:16:42.874969) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:16:44.840840 run osmo-stp_10.42.42.5(pid=16292): stderr: | �[0;m�[38;5;43m20221213011643064 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213011643064 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213011643064 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213011643065 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213011643065 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213011643066 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213011643066 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:16:44.995509 run patchelf(pid=16295): Terminating (SIGINT) 01:16:45.177249 run patchelf(pid=16295): Terminated: ok {rc=0} 01:16:45.209844 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=16292): Process ended prematurely: osmo-stp_10.42.42.5(pid=16292) [trial-2384↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16292)] [trial-2384↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 01:16:45.219024 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 01:16:45.281387 run osmo-hlr_10.42.42.2(pid=16289): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16289)] 01:16:45.332283 run osmo-hlr_10.42.42.2(pid=16289): stdout: | (launched: 2022-12-13_01:16:41.868666) 01:16:45.384182 run osmo-hlr_10.42.42.2(pid=16289): stderr: | �[0;m�[1;31m20221213011642064 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213011642065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213011642065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213011642065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213011642065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213011642065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213011642080 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:nanobts+band-1900+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213011642090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213011642090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213011642090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:16:45.429331 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16288): Terminating (SIGTERM) 01:16:45.473313 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16291): Terminating (SIGTERM) 01:16:45.516653 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16294): Terminating (SIGTERM) 01:16:45.526819 --- ParallelTerminationStrategy: PID 16288 died... 01:16:45.582931 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16288): Terminated: ok {rc=0} 01:16:45.593210 --- ParallelTerminationStrategy: PID 16291 died... 01:16:45.648825 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16291): Terminated: ok {rc=0} 01:16:45.659285 --- ParallelTerminationStrategy: PID 16294 died... 01:16:45.714788 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16294): Terminated: ok {rc=0} 01:16:45.800762 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16292): Process ended prematurely: osmo-stp_10.42.42.5(pid=16292) [trial-2384↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16292)]