Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=11497): Process ended prematurely: osmo-stp_10.42.42.5(pid=11497) [trial-2384↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11497)]
Standard Output
---------------------------------------------- trial-2384 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 00:26:40.769392 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:26:40.779987 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 00:26:40.921943 tst cs_paging_gprs_active.py: using LAC 32358 00:26:41.039575 tst cs_paging_gprs_active.py: using RAC 228 00:26:41.159613 tst cs_paging_gprs_active.py: using CellId 32358 00:26:41.276782 tst cs_paging_gprs_active.py: using BVCI 32359 00:26:41.299778 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:26:41.310621 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:26:41.321152 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:26:41.331534 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:26:41.341991 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:26:41.352495 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:26:41.363196 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:26:41.373643 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:26:41.384351 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:26:41.503885 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:26:41.797610 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:26:41.932892 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:26:42.266067 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11487): Launched 00:26:42.544559 run iperf3-srv_10.42.42.10(pid=11488): Launched 00:26:42.742897 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:26:42.877868 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:26:43.212745 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11489): Launched 00:26:43.491600 run iperf3-srv_10.42.42.10(pid=11490): Launched 00:26:43.690249 tst cs_paging_gprs_active.py:38: start network... 00:26:43.825855 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:26:44.337966 run create_hlr_db(pid=11491): Launched 00:26:44.524430 bus /gobi_6: Setting Powered False 00:26:45.546044 run create_hlr_db(pid=11491): Terminated: ok {rc=0} 00:26:46.022137 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11493): Launched 00:26:46.456500 run osmo-hlr_10.42.42.2(pid=11494): Launched 00:26:46.620358 run osmo-stp_10.42.42.5: Starting osmo-stp 00:26:47.306887 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11496): Launched 00:26:47.609267 run osmo-stp_10.42.42.5(pid=11497): Launched 00:26:47.719135 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:26:48.242851 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11499): Launched 00:26:48.349694 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:26:48.611887 run patchelf(pid=11500): Launched 00:26:48.788235 run osmo-stp_10.42.42.5(pid=11497): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11497)] 00:26:48.917083 run osmo-stp_10.42.42.5(pid=11497): stdout: | (launched: 2022-12-13_00:26:47.460077) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:26:49.045566 run osmo-stp_10.42.42.5(pid=11497): stderr: | �[0;m�[38;5;43m20221213002647627 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213002647627 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213002647628 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213002647628 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213002647629 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213002647629 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213002647629 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:26:49.169953 run osmo-stp_10.42.42.5(pid=11497): stdout: | (launched: 2022-12-13_00:26:47.460077) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:26:49.292688 run osmo-stp_10.42.42.5(pid=11497): stderr: | �[0;m�[38;5;43m20221213002647627 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213002647627 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213002647628 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213002647628 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213002647629 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213002647629 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213002647629 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:26:49.436346 run patchelf(pid=11500): Terminating (SIGINT) 00:26:49.605730 run patchelf(pid=11500): Terminated: ok {rc=0} 00:26:49.636725 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11497): Process ended prematurely: osmo-stp_10.42.42.5(pid=11497) [trial-2384↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11497)] [trial-2384↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 00:26:49.645778 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 00:26:49.705643 run osmo-hlr_10.42.42.2(pid=11494): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11494)] 00:26:49.754390 run osmo-hlr_10.42.42.2(pid=11494): stdout: | (launched: 2022-12-13_00:26:46.194568) 00:26:49.803713 run osmo-hlr_10.42.42.2(pid=11494): stderr: | �[0;m�[1;31m20221213002646485 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213002646485 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213002646485 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213002646485 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213002646485 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213002646485 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213002646499 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213002646516 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213002646516 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213002646516 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:26:49.845794 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11487): Terminating (SIGTERM) 00:26:49.885453 run iperf3-srv_10.42.42.10(pid=11488): Terminating (SIGTERM) 00:26:49.925374 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11489): Terminating (SIGTERM) 00:26:49.965084 run iperf3-srv_10.42.42.10(pid=11490): Terminating (SIGTERM) 00:26:50.004916 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11493): Terminating (SIGTERM) 00:26:50.045411 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11496): Terminating (SIGTERM) 00:26:50.085193 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11499): Terminating (SIGTERM) 00:26:50.094336 --- ParallelTerminationStrategy: PID 11487 died... 00:26:50.147488 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11487): Terminated: ok {rc=0} 00:26:50.156935 --- ParallelTerminationStrategy: PID 11488 died... 00:26:50.209403 run iperf3-srv_10.42.42.10(pid=11488): Terminated {rc=256} 00:26:50.218724 --- ParallelTerminationStrategy: PID 11489 died... 00:26:50.271635 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11489): Terminated: ok {rc=0} 00:26:50.281171 --- ParallelTerminationStrategy: PID 11490 died... 00:26:50.333627 run iperf3-srv_10.42.42.10(pid=11490): Terminated {rc=256} 00:26:50.342998 --- ParallelTerminationStrategy: PID 11493 died... 00:26:50.396031 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11493): Terminated: ok {rc=0} 00:26:50.405750 --- ParallelTerminationStrategy: PID 11496 died... 00:26:50.458395 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11496): Terminated: ok {rc=0} 00:26:50.467966 --- ParallelTerminationStrategy: PID 11499 died... 00:26:50.521122 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11499): Terminated: ok {rc=0} 00:26:50.607962 bus /gobi_0: Setting Powered False 00:26:51.712192 bus /gobi_0: Setting Powered False 00:26:52.822477 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11497): Process ended prematurely: osmo-stp_10.42.42.5(pid=11497) [trial-2384↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11497)]