Failed
gprs:trx-b200+mod-bts0-egprs.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=12008): Process ended prematurely: osmo-stp_10.42.42.5(pid=12008) [trial-2384↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12008)]
Standard Output
---------------------------------------------- trial-2384 gprs:trx-b200+mod-bts0-egprs ping_idle_ping.py ---------------------------------------------- 00:34:06.387741 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:34:06.399784 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 00:34:06.547407 tst ping_idle_ping.py: using LAC 32398 00:34:06.673773 tst ping_idle_ping.py: using RAC 13 00:34:06.799635 tst ping_idle_ping.py: using CellId 32398 00:34:06.920506 tst ping_idle_ping.py: using BVCI 32399 00:34:06.943570 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:34:06.954742 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:34:06.965530 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:34:06.976309 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:34:06.987233 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:34:06.998024 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:34:07.008799 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:34:07.020226 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:34:07.313735 tst ping_idle_ping.py:24: start network... 00:34:07.448612 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:34:07.958204 run create_hlr_db(pid=12002): Launched 00:34:08.146171 bus /gobi_6: Setting Powered False 00:34:09.166988 run create_hlr_db(pid=12002): Terminated: ok {rc=0} 00:34:09.598368 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12004): Launched 00:34:09.921395 run osmo-hlr_10.42.42.2(pid=12005): Launched 00:34:10.039651 run osmo-stp_10.42.42.5: Starting osmo-stp 00:34:10.605192 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12007): Launched 00:34:10.929726 run osmo-stp_10.42.42.5(pid=12008): Launched 00:34:11.047073 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:34:11.613314 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12010): Launched 00:34:11.729169 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:34:12.018786 run patchelf(pid=12011): Launched 00:34:12.196163 run osmo-stp_10.42.42.5(pid=12008): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12008)] 00:34:12.326290 run osmo-stp_10.42.42.5(pid=12008): stdout: | (launched: 2022-12-13_00:34:10.769688) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:34:12.455884 run osmo-stp_10.42.42.5(pid=12008): stderr: | �[0;m�[38;5;43m20221213003410958 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213003410958 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213003410958 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213003410959 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213003410959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213003410959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213003410959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:34:12.581158 run osmo-stp_10.42.42.5(pid=12008): stdout: | (launched: 2022-12-13_00:34:10.769688) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:34:12.704334 run osmo-stp_10.42.42.5(pid=12008): stderr: | �[0;m�[38;5;43m20221213003410958 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213003410958 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213003410958 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213003410959 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213003410959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213003410959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213003410959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:34:12.849653 run patchelf(pid=12011): Terminating (SIGINT) 00:34:13.020250 run patchelf(pid=12011): Terminated: ok {rc=0} 00:34:13.051764 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=12008): Process ended prematurely: osmo-stp_10.42.42.5(pid=12008) [trial-2384↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12008)] [trial-2384↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27] 00:34:13.060608 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 00:34:13.120926 run osmo-hlr_10.42.42.2(pid=12005): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12005)] 00:34:13.170313 run osmo-hlr_10.42.42.2(pid=12005): stdout: | (launched: 2022-12-13_00:34:09.762958) 00:34:13.220271 run osmo-hlr_10.42.42.2(pid=12005): stderr: | �[0;m�[1;31m20221213003409956 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213003409956 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213003409956 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213003409956 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213003409956 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213003409956 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213003409968 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-b200+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213003409977 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213003409977 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213003409977 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:34:13.262501 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12004): Terminating (SIGTERM) 00:34:13.302682 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12007): Terminating (SIGTERM) 00:34:13.342939 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12010): Terminating (SIGTERM) 00:34:13.352353 --- ParallelTerminationStrategy: PID 12004 died... 00:34:13.406643 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12004): Terminated: ok {rc=0} 00:34:13.416457 --- ParallelTerminationStrategy: PID 12007 died... 00:34:13.470130 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12007): Terminated: ok {rc=0} 00:34:13.479765 --- ParallelTerminationStrategy: PID 12010 died... 00:34:13.533624 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12010): Terminated: ok {rc=0} 00:34:13.622638 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12008): Process ended prematurely: osmo-stp_10.42.42.5(pid=12008) [trial-2384↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12008)]