Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=14858): Process ended prematurely: osmo-stp_10.42.42.5(pid=14858) [trial-2384↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14858)]
Standard Output
---------------------------------------------- trial-2384 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 00:59:35.628290 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:59:35.639057 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 00:59:35.778197 tst cs_paging_gprs_active.py: using LAC 32532 00:59:35.899411 tst cs_paging_gprs_active.py: using RAC 147 00:59:36.021547 tst cs_paging_gprs_active.py: using CellId 32532 00:59:36.142791 tst cs_paging_gprs_active.py: using BVCI 32533 00:59:36.166192 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:59:36.176884 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:59:36.187490 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:59:36.198183 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:59:36.208701 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:59:36.219275 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:59:36.230049 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:59:36.240535 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:59:36.251332 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:59:36.370029 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:59:36.648359 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:59:36.774843 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:59:37.091184 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14848): Launched 00:59:37.355102 run iperf3-srv_10.42.42.10(pid=14849): Launched 00:59:37.541463 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:59:37.668225 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:59:37.985260 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14850): Launched 00:59:38.248559 run iperf3-srv_10.42.42.10(pid=14851): Launched 00:59:38.434510 tst cs_paging_gprs_active.py:38: start network... 00:59:38.561271 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:59:39.051310 run create_hlr_db(pid=14852): Launched 00:59:39.225817 bus /gobi_6: Setting Powered False 00:59:40.248735 run create_hlr_db(pid=14852): Terminated: ok {rc=0} 00:59:40.684074 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14854): Launched 00:59:41.013076 run osmo-hlr_10.42.42.2(pid=14855): Launched 00:59:41.132124 run osmo-stp_10.42.42.5: Starting osmo-stp 00:59:41.703765 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14857): Launched 00:59:42.032015 run osmo-stp_10.42.42.5(pid=14858): Launched 00:59:42.151198 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:59:42.726374 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14860): Launched 00:59:42.843585 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:59:43.130880 run patchelf(pid=14861): Launched 00:59:43.323415 run osmo-stp_10.42.42.5(pid=14858): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14858)] 00:59:43.463053 run osmo-stp_10.42.42.5(pid=14858): stdout: | (launched: 2022-12-13_00:59:41.870213) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:59:43.603265 run osmo-stp_10.42.42.5(pid=14858): stderr: | �[0;m�[38;5;43m20221213005942058 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213005942059 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213005942059 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213005942059 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213005942060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213005942060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213005942060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:59:43.738783 run osmo-stp_10.42.42.5(pid=14858): stdout: | (launched: 2022-12-13_00:59:41.870213) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:59:43.872826 run osmo-stp_10.42.42.5(pid=14858): stderr: | �[0;m�[38;5;43m20221213005942058 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213005942059 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213005942059 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213005942059 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213005942060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213005942060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213005942060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:59:44.029891 run patchelf(pid=14861): Terminating (SIGINT) 00:59:44.214478 run patchelf(pid=14861): Terminated: ok {rc=0} 00:59:44.248208 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14858): Process ended prematurely: osmo-stp_10.42.42.5(pid=14858) [trial-2384↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14858)] [trial-2384↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 00:59:44.258060 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 00:59:44.322147 run osmo-hlr_10.42.42.2(pid=14855): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14855)] 00:59:44.374326 run osmo-hlr_10.42.42.2(pid=14855): stdout: | (launched: 2022-12-13_00:59:40.850739) 00:59:44.426787 run osmo-hlr_10.42.42.2(pid=14855): stderr: | �[0;m�[1;31m20221213005941044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213005941044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213005941044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213005941044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213005941044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213005941044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213005941061 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213005941070 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213005941070 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213005941070 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:59:44.471009 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14848): Terminating (SIGTERM) 00:59:44.513166 run iperf3-srv_10.42.42.10(pid=14849): Terminating (SIGTERM) 00:59:44.556743 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14850): Terminating (SIGTERM) 00:59:44.598893 run iperf3-srv_10.42.42.10(pid=14851): Terminating (SIGTERM) 00:59:44.640920 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14854): Terminating (SIGTERM) 00:59:44.682989 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14857): Terminating (SIGTERM) 00:59:44.725383 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14860): Terminating (SIGTERM) 00:59:44.735433 --- ParallelTerminationStrategy: PID 14848 died... 00:59:44.791868 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14848): Terminated: ok {rc=0} 00:59:44.802236 --- ParallelTerminationStrategy: PID 14849 died... 00:59:44.858182 run iperf3-srv_10.42.42.10(pid=14849): Terminated {rc=256} 00:59:44.868375 --- ParallelTerminationStrategy: PID 14850 died... 00:59:44.924468 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14850): Terminated: ok {rc=0} 00:59:44.935209 --- ParallelTerminationStrategy: PID 14851 died... 00:59:44.990883 run iperf3-srv_10.42.42.10(pid=14851): Terminated {rc=256} 00:59:45.001648 --- ParallelTerminationStrategy: PID 14854 died... 00:59:45.057377 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14854): Terminated: ok {rc=0} 00:59:45.068161 --- ParallelTerminationStrategy: PID 14857 died... 00:59:45.124714 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14857): Terminated: ok {rc=0} 00:59:45.135006 --- ParallelTerminationStrategy: PID 14860 died... 00:59:45.190857 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14860): Terminated: ok {rc=0} 00:59:45.278125 bus /gobi_0: Setting Powered False 00:59:46.397738 bus /gobi_0: Setting Powered False 00:59:47.509264 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14858): Process ended prematurely: osmo-stp_10.42.42.5(pid=14858) [trial-2384↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14858)]