Failed
gprs:trx-lms.cs_paging_gprs_active.py (from gprs_trx-lms)
Stacktrace
osmo-stp_10.42.42.5(pid=14790): Process ended prematurely: osmo-stp_10.42.42.5(pid=14790) [trial-2384↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14790)]
Standard Output
---------------------------------------------- trial-2384 gprs:trx-lms cs_paging_gprs_active.py ---------------------------------------------- 00:58:35.275978 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 00:58:35.286691 tst gprs:trx-lms: Using 1 x bts (candidates: 1) 00:58:35.425133 tst cs_paging_gprs_active.py: using LAC 32527 00:58:35.547173 tst cs_paging_gprs_active.py: using RAC 142 00:58:35.669817 tst cs_paging_gprs_active.py: using CellId 32527 00:58:35.789999 tst cs_paging_gprs_active.py: using BVCI 32528 00:58:35.813745 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 00:58:35.824836 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 00:58:35.835422 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 00:58:35.846079 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 00:58:35.856488 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 00:58:35.867103 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 00:58:35.877746 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 00:58:35.888034 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 00:58:35.898648 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 00:58:36.015825 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 00:58:36.314992 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:58:36.453776 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:58:36.797544 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14780): Launched 00:58:37.085522 run iperf3-srv_10.42.42.10(pid=14781): Launched 00:58:37.288225 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:58:37.426808 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:58:37.770706 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14782): Launched 00:58:38.059043 run iperf3-srv_10.42.42.10(pid=14783): Launched 00:58:38.262455 tst cs_paging_gprs_active.py:38: start network... 00:58:38.401032 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:58:38.926924 run create_hlr_db(pid=14784): Launched 00:58:39.119050 bus /sierra_2: Setting Powered False 00:58:40.140154 run create_hlr_db(pid=14784): Terminated: ok {rc=0} 00:58:40.554828 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14786): Launched 00:58:40.867964 run osmo-hlr_10.42.42.2(pid=14787): Launched 00:58:40.991334 run osmo-stp_10.42.42.5: Starting osmo-stp 00:58:41.537141 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14789): Launched 00:58:41.848011 run osmo-stp_10.42.42.5(pid=14790): Launched 00:58:41.960645 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:58:42.501252 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14792): Launched 00:58:42.610956 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:58:42.881256 run patchelf(pid=14793): Launched 00:58:43.061927 run osmo-stp_10.42.42.5(pid=14790): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14790)] 00:58:43.193180 run osmo-stp_10.42.42.5(pid=14790): stdout: | (launched: 2022-12-13_00:58:41.693732) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:58:43.324662 run osmo-stp_10.42.42.5(pid=14790): stderr: | �[0;m�[38;5;43m20221213005841868 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213005841868 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213005841868 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213005841869 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213005841869 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213005841869 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213005841869 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:58:43.451959 run osmo-stp_10.42.42.5(pid=14790): stdout: | (launched: 2022-12-13_00:58:41.693732) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:58:43.578633 run osmo-stp_10.42.42.5(pid=14790): stderr: | �[0;m�[38;5;43m20221213005841868 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213005841868 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213005841868 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213005841869 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213005841869 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213005841869 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213005841869 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:58:43.725770 run patchelf(pid=14793): Terminating (SIGINT) 00:58:43.899880 run patchelf(pid=14793): Terminated: ok {rc=0} 00:58:43.931708 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14790): Process ended prematurely: osmo-stp_10.42.42.5(pid=14790) [trial-2384↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14790)] [trial-2384↪gprs:trx-lms↪cs_paging_gprs_active.py:38] 00:58:43.941072 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 00:58:44.001049 run osmo-hlr_10.42.42.2(pid=14787): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:trx-lms↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14787)] 00:58:44.050191 run osmo-hlr_10.42.42.2(pid=14787): stdout: | (launched: 2022-12-13_00:58:40.712266) 00:58:44.100201 run osmo-hlr_10.42.42.2(pid=14787): stderr: | �[0;m�[1;31m20221213005840890 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213005840890 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213005840890 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213005840890 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213005840890 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213005840890 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213005840903 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-lms/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213005840911 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213005840912 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213005840912 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:58:44.142524 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14780): Terminating (SIGTERM) 00:58:44.182438 run iperf3-srv_10.42.42.10(pid=14781): Terminating (SIGTERM) 00:58:44.222639 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14782): Terminating (SIGTERM) 00:58:44.262500 run iperf3-srv_10.42.42.10(pid=14783): Terminating (SIGTERM) 00:58:44.302334 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14786): Terminating (SIGTERM) 00:58:44.342111 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14789): Terminating (SIGTERM) 00:58:44.381810 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14792): Terminating (SIGTERM) 00:58:44.391078 --- ParallelTerminationStrategy: PID 14780 died... 00:58:44.444560 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14780): Terminated: ok {rc=0} 00:58:44.454493 --- ParallelTerminationStrategy: PID 14781 died... 00:58:44.507865 run iperf3-srv_10.42.42.10(pid=14781): Terminated {rc=256} 00:58:44.517885 --- ParallelTerminationStrategy: PID 14782 died... 00:58:44.571217 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14782): Terminated: ok {rc=0} 00:58:44.581102 --- ParallelTerminationStrategy: PID 14783 died... 00:58:44.634519 run iperf3-srv_10.42.42.10(pid=14783): Terminated {rc=256} 00:58:44.644341 --- ParallelTerminationStrategy: PID 14786 died... 00:58:44.697420 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14786): Terminated: ok {rc=0} 00:58:44.707180 --- ParallelTerminationStrategy: PID 14789 died... 00:58:44.760858 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14789): Terminated: ok {rc=0} 00:58:44.770516 --- ParallelTerminationStrategy: PID 14792 died... 00:58:44.823762 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14792): Terminated: ok {rc=0} 00:58:44.912504 bus /gobi_0: Setting Powered False 00:58:46.046246 bus /gobi_0: Setting Powered False 00:58:47.164175 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14790): Process ended prematurely: osmo-stp_10.42.42.5(pid=14790) [trial-2384↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14790)]