Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=14036): Process ended prematurely: osmo-stp_10.42.42.5(pid=14036) [trial-2384↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14036)]
Standard Output
---------------------------------------------- trial-2384 gprs:trx-umtrx+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 00:51:37.197977 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:51:37.209412 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 00:51:37.378386 tst cs_paging_gprs_active.py: using LAC 32490 00:51:37.509898 tst cs_paging_gprs_active.py: using RAC 105 00:51:37.643658 tst cs_paging_gprs_active.py: using CellId 32490 00:51:37.769854 tst cs_paging_gprs_active.py: using BVCI 32491 00:51:37.794045 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:51:37.805308 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:51:37.816277 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:51:37.829690 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:51:37.841839 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:51:37.853655 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:51:37.865152 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:51:37.876696 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:51:37.888433 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:51:38.008884 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:51:38.294673 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:51:38.424515 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:51:38.751356 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14026): Launched 00:51:39.023789 run iperf3-srv_10.42.42.10(pid=14027): Launched 00:51:39.214377 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:51:39.344449 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:51:39.671179 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14028): Launched 00:51:39.943852 run iperf3-srv_10.42.42.10(pid=14029): Launched 00:51:40.134639 tst cs_paging_gprs_active.py:38: start network... 00:51:40.264470 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:51:40.768439 run create_hlr_db(pid=14030): Launched 00:51:40.947677 bus /gobi_6: Setting Powered False 00:51:41.970116 run create_hlr_db(pid=14030): Terminated: ok {rc=0} 00:51:42.387282 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14032): Launched 00:51:42.704416 run osmo-hlr_10.42.42.2(pid=14033): Launched 00:51:42.830800 run osmo-stp_10.42.42.5: Starting osmo-stp 00:51:43.379368 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14035): Launched 00:51:43.693952 run osmo-stp_10.42.42.5(pid=14036): Launched 00:51:43.808743 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:51:44.357678 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14038): Launched 00:51:44.469753 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:51:44.754214 run patchelf(pid=14039): Launched 00:51:44.938707 run osmo-stp_10.42.42.5(pid=14036): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14036)] 00:51:45.072919 run osmo-stp_10.42.42.5(pid=14036): stdout: | (launched: 2022-12-13_00:51:43.538568) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:51:45.207650 run osmo-stp_10.42.42.5(pid=14036): stderr: | �[0;m�[38;5;43m20221213005143710 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213005143710 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213005143711 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213005143711 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213005143711 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213005143712 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213005143712 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:51:45.337879 run osmo-stp_10.42.42.5(pid=14036): stdout: | (launched: 2022-12-13_00:51:43.538568) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:51:45.467052 run osmo-stp_10.42.42.5(pid=14036): stderr: | �[0;m�[38;5;43m20221213005143710 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213005143710 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213005143711 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213005143711 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213005143711 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213005143712 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213005143712 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:51:45.617644 run patchelf(pid=14039): Terminating (SIGINT) 00:51:45.794976 run patchelf(pid=14039): Terminated: ok {rc=0} 00:51:45.827414 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14036): Process ended prematurely: osmo-stp_10.42.42.5(pid=14036) [trial-2384↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14036)] [trial-2384↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 00:51:45.837294 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 00:51:45.915992 run osmo-hlr_10.42.42.2(pid=14033): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14033)] 00:51:45.968390 run osmo-hlr_10.42.42.2(pid=14033): stdout: | (launched: 2022-12-13_00:51:42.546953) 00:51:46.019589 run osmo-hlr_10.42.42.2(pid=14033): stderr: | �[0;m�[1;31m20221213005142724 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213005142724 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213005142724 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213005142724 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213005142724 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213005142724 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213005142736 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-umtrx+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213005142744 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213005142745 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213005142745 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:51:46.063005 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14026): Terminating (SIGTERM) 00:51:46.103872 run iperf3-srv_10.42.42.10(pid=14027): Terminating (SIGTERM) 00:51:46.145123 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14028): Terminating (SIGTERM) 00:51:46.185992 run iperf3-srv_10.42.42.10(pid=14029): Terminating (SIGTERM) 00:51:46.228708 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14032): Terminating (SIGTERM) 00:51:46.270888 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14035): Terminating (SIGTERM) 00:51:46.313598 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14038): Terminating (SIGTERM) 00:51:46.323068 --- ParallelTerminationStrategy: PID 14026 died... 00:51:46.379933 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14026): Terminated: ok {rc=0} 00:51:46.390393 --- ParallelTerminationStrategy: PID 14027 died... 00:51:46.452535 run iperf3-srv_10.42.42.10(pid=14027): Terminated {rc=256} 00:51:46.463803 --- ParallelTerminationStrategy: PID 14028 died... 00:51:46.524334 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14028): Terminated: ok {rc=0} 00:51:46.535712 --- ParallelTerminationStrategy: PID 14029 died... 00:51:46.596277 run iperf3-srv_10.42.42.10(pid=14029): Terminated {rc=256} 00:51:46.607676 --- ParallelTerminationStrategy: PID 14032 died... 00:51:46.670345 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14032): Terminated: ok {rc=0} 00:51:46.681680 --- ParallelTerminationStrategy: PID 14035 died... 00:51:46.743133 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14035): Terminated: ok {rc=0} 00:51:46.754433 --- ParallelTerminationStrategy: PID 14038 died... 00:51:46.815682 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14038): Terminated: ok {rc=0} 00:51:46.910541 bus /gobi_0: Setting Powered False 00:51:48.013553 bus /gobi_0: Setting Powered False 00:51:49.123284 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14036): Process ended prematurely: osmo-stp_10.42.42.5(pid=14036) [trial-2384↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14036)]