Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=14103): Process ended prematurely: osmo-stp_10.42.42.5(pid=14103) [trial-2384↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14103)]
Standard Output
---------------------------------------------- trial-2384 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 00:52:37.511916 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:52:37.523376 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 00:52:37.695259 tst cs_paging_gprs_active.py: using LAC 32495 00:52:37.824724 tst cs_paging_gprs_active.py: using RAC 110 00:52:37.951573 tst cs_paging_gprs_active.py: using CellId 32495 00:52:38.078690 tst cs_paging_gprs_active.py: using BVCI 32496 00:52:38.103957 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:52:38.115403 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:52:38.126784 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:52:38.138425 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:52:38.149964 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:52:38.161521 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:52:38.173229 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:52:38.184559 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:52:38.196250 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:52:38.316083 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:52:38.618395 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:52:38.756878 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:52:39.098667 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14093): Launched 00:52:39.385310 run iperf3-srv_10.42.42.10(pid=14094): Launched 00:52:39.587652 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:52:39.726298 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:52:40.070427 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14095): Launched 00:52:40.357300 run iperf3-srv_10.42.42.10(pid=14096): Launched 00:52:40.559908 tst cs_paging_gprs_active.py:38: start network... 00:52:40.698205 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:52:41.220095 run create_hlr_db(pid=14097): Launched 00:52:41.410623 bus /gobi_6: Setting Powered False 00:52:42.431849 run create_hlr_db(pid=14097): Terminated: ok {rc=0} 00:52:42.852167 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14099): Launched 00:52:43.184631 run osmo-hlr_10.42.42.2(pid=14100): Launched 00:52:43.306685 run osmo-stp_10.42.42.5: Starting osmo-stp 00:52:43.883952 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14102): Launched 00:52:44.213134 run osmo-stp_10.42.42.5(pid=14103): Launched 00:52:44.332436 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:52:44.908400 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14105): Launched 00:52:45.026526 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:52:45.319082 run patchelf(pid=14106): Launched 00:52:45.510997 run osmo-stp_10.42.42.5(pid=14103): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14103)] 00:52:45.651079 run osmo-stp_10.42.42.5(pid=14103): stdout: | (launched: 2022-12-13_00:52:44.051376) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:52:45.791854 run osmo-stp_10.42.42.5(pid=14103): stderr: | �[0;m�[38;5;43m20221213005244241 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213005244242 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213005244242 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213005244242 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213005244243 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213005244243 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213005244243 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:52:45.939747 run osmo-stp_10.42.42.5(pid=14103): stdout: | (launched: 2022-12-13_00:52:44.051376) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:52:46.075596 run osmo-stp_10.42.42.5(pid=14103): stderr: | �[0;m�[38;5;43m20221213005244241 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213005244242 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213005244242 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213005244242 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213005244243 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213005244243 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213005244243 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:52:46.227602 run patchelf(pid=14106): Terminating (SIGINT) 00:52:46.404901 run patchelf(pid=14106): Terminated: ok {rc=0} 00:52:46.439567 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14103): Process ended prematurely: osmo-stp_10.42.42.5(pid=14103) [trial-2384↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14103)] [trial-2384↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 00:52:46.449875 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 00:52:46.512284 run osmo-hlr_10.42.42.2(pid=14100): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14100)] 00:52:46.563602 run osmo-hlr_10.42.42.2(pid=14100): stdout: | (launched: 2022-12-13_00:52:43.019877) 00:52:46.614777 run osmo-hlr_10.42.42.2(pid=14100): stderr: | �[0;m�[1;31m20221213005243216 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213005243216 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213005243216 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213005243216 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213005243216 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213005243216 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213005243229 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213005243237 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213005243237 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213005243237 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:52:46.659362 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14093): Terminating (SIGTERM) 00:52:46.702902 run iperf3-srv_10.42.42.10(pid=14094): Terminating (SIGTERM) 00:52:46.745717 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14095): Terminating (SIGTERM) 00:52:46.790037 run iperf3-srv_10.42.42.10(pid=14096): Terminating (SIGTERM) 00:52:46.841710 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14099): Terminating (SIGTERM) 00:52:46.891636 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14102): Terminating (SIGTERM) 00:52:46.937519 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14105): Terminating (SIGTERM) 00:52:46.948584 --- ParallelTerminationStrategy: PID 14093 died... 00:52:47.008530 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14093): Terminated: ok {rc=0} 00:52:47.019330 --- ParallelTerminationStrategy: PID 14094 died... 00:52:47.078485 run iperf3-srv_10.42.42.10(pid=14094): Terminated {rc=256} 00:52:47.089335 --- ParallelTerminationStrategy: PID 14095 died... 00:52:47.148421 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14095): Terminated: ok {rc=0} 00:52:47.158985 --- ParallelTerminationStrategy: PID 14096 died... 00:52:47.218817 run iperf3-srv_10.42.42.10(pid=14096): Terminated {rc=256} 00:52:47.229887 --- ParallelTerminationStrategy: PID 14099 died... 00:52:47.287275 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14099): Terminated: ok {rc=0} 00:52:47.298100 --- ParallelTerminationStrategy: PID 14102 died... 00:52:47.354650 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14102): Terminated: ok {rc=0} 00:52:47.365653 --- ParallelTerminationStrategy: PID 14105 died... 00:52:47.422380 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14105): Terminated: ok {rc=0} 00:52:47.510421 bus /gobi_0: Setting Powered False 00:52:48.617656 bus /gobi_0: Setting Powered False 00:52:49.729735 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14103): Process ended prematurely: osmo-stp_10.42.42.5(pid=14103) [trial-2384↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14103)]