Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=14173): Process ended prematurely: osmo-stp_10.42.42.5(pid=14173) [trial-2384↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14173)]
Standard Output
---------------------------------------------- trial-2384 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 00:53:37.808128 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:53:37.819461 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 00:53:37.959020 tst cs_paging_gprs_active.py: using LAC 32500 00:53:38.079390 tst cs_paging_gprs_active.py: using RAC 115 00:53:38.206712 tst cs_paging_gprs_active.py: using CellId 32500 00:53:38.328388 tst cs_paging_gprs_active.py: using BVCI 32501 00:53:38.351962 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:53:38.363277 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:53:38.374410 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:53:38.385565 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:53:38.396683 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:53:38.407799 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:53:38.419032 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:53:38.430071 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:53:38.441430 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 00:53:38.559160 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 00:53:38.840840 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:53:38.968220 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:53:39.288790 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14163): Launched 00:53:39.558099 run iperf3-srv_10.42.42.10(pid=14164): Launched 00:53:39.745981 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:53:39.873880 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:53:40.196321 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14165): Launched 00:53:40.462452 run iperf3-srv_10.42.42.10(pid=14166): Launched 00:53:40.649523 tst cs_paging_gprs_active.py:38: start network... 00:53:40.777599 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:53:41.274910 run create_hlr_db(pid=14167): Launched 00:53:41.452251 bus /gobi_6: Setting Powered False 00:53:42.474546 run create_hlr_db(pid=14167): Terminated: ok {rc=0} 00:53:42.915227 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14169): Launched 00:53:43.249575 run osmo-hlr_10.42.42.2(pid=14170): Launched 00:53:43.369386 run osmo-stp_10.42.42.5: Starting osmo-stp 00:53:43.947142 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14172): Launched 00:53:44.278855 run osmo-stp_10.42.42.5(pid=14173): Launched 00:53:44.399722 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:53:44.977587 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14175): Launched 00:53:45.096214 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:53:45.384860 run patchelf(pid=14176): Launched 00:53:45.577943 run osmo-stp_10.42.42.5(pid=14173): ERR: Terminated: ERROR {rc=1} [trial-2384↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14173)] 00:53:45.719206 run osmo-stp_10.42.42.5(pid=14173): stdout: | (launched: 2022-12-13_00:53:44.115250) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:53:45.869337 run osmo-stp_10.42.42.5(pid=14173): stderr: | �[0;m�[38;5;43m20221213005344306 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213005344306 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213005344307 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213005344307 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213005344308 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213005344308 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213005344308 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:53:46.000938 run osmo-stp_10.42.42.5(pid=14173): stdout: | (launched: 2022-12-13_00:53:44.115250) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:53:46.131452 run osmo-stp_10.42.42.5(pid=14173): stderr: | �[0;m�[38;5;43m20221213005344306 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213005344306 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213005344307 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213005344307 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213005344308 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213005344308 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213005344308 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:53:46.283209 run patchelf(pid=14176): Terminating (SIGINT) 00:53:46.499681 run patchelf(pid=14176): Terminated: ok {rc=0} 00:53:46.540768 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14173): Process ended prematurely: osmo-stp_10.42.42.5(pid=14173) [trial-2384↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14173)] [trial-2384↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 00:53:46.556129 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 00:53:46.628892 run osmo-hlr_10.42.42.2(pid=14170): ERR: Terminated: ERROR {rc=237} [trial-2384↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14170)] 00:53:46.698318 run osmo-hlr_10.42.42.2(pid=14170): stdout: | (launched: 2022-12-13_00:53:43.083729) 00:53:46.765184 run osmo-hlr_10.42.42.2(pid=14170): stderr: | �[0;m�[1;31m20221213005343281 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213005343281 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213005343281 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213005343281 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213005343281 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213005343281 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213005343294 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213005343303 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213005343303 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213005343303 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:53:46.811439 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14163): Terminating (SIGTERM) 00:53:46.863184 run iperf3-srv_10.42.42.10(pid=14164): Terminating (SIGTERM) 00:53:46.906740 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14165): Terminating (SIGTERM) 00:53:46.955586 run iperf3-srv_10.42.42.10(pid=14166): Terminating (SIGTERM) 00:53:47.005981 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14169): Terminating (SIGTERM) 00:53:47.054030 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14172): Terminating (SIGTERM) 00:53:47.106653 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14175): Terminating (SIGTERM) 00:53:47.119174 --- ParallelTerminationStrategy: PID 14163 died... 00:53:47.191737 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14163): Terminated: ok {rc=0} 00:53:47.210237 --- ParallelTerminationStrategy: PID 14164 died... 00:53:47.282367 run iperf3-srv_10.42.42.10(pid=14164): Terminated {rc=256} 00:53:47.296836 --- ParallelTerminationStrategy: PID 14165 died... 00:53:47.358688 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14165): Terminated: ok {rc=0} 00:53:47.371053 --- ParallelTerminationStrategy: PID 14166 died... 00:53:47.441958 run iperf3-srv_10.42.42.10(pid=14166): Terminated {rc=256} 00:53:47.453880 --- ParallelTerminationStrategy: PID 14169 died... 00:53:47.516188 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14169): Terminated: ok {rc=0} 00:53:47.526481 --- ParallelTerminationStrategy: PID 14172 died... 00:53:47.600175 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14172): Terminated: ok {rc=0} 00:53:47.610454 --- ParallelTerminationStrategy: PID 14175 died... 00:53:47.676922 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14175): Terminated: ok {rc=0} 00:53:47.769605 bus /gobi_0: Setting Powered False 00:53:48.924655 bus /gobi_0: Setting Powered False 00:53:50.049379 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14173): Process ended prematurely: osmo-stp_10.42.42.5(pid=14173) [trial-2384↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14173)]