Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=15250): Process ended prematurely: osmo-stp_10.42.42.5(pid=15250) [trial-2392↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15250)]
Standard Output
---------------------------------------------- trial-2392 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 18:14:13.018931 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 18:14:13.029668 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 18:14:13.156310 tst cs_paging_gprs_active.py: using LAC 35373 18:14:13.275143 tst cs_paging_gprs_active.py: using RAC 183 18:14:13.394076 tst cs_paging_gprs_active.py: using CellId 35373 18:14:13.513567 tst cs_paging_gprs_active.py: using BVCI 35374 18:14:13.536883 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 18:14:13.547601 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 18:14:13.558052 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 18:14:13.568498 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 18:14:13.578968 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 18:14:13.589351 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 18:14:13.599867 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 18:14:13.610361 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 18:14:13.621065 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 18:14:13.741335 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 18:14:14.025384 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:14:14.152813 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:14:14.472790 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15240): Launched 18:14:14.739096 run iperf3-srv_10.42.42.10(pid=15241): Launched 18:14:14.926887 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:14:15.055662 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:14:15.377807 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15242): Launched 18:14:15.644026 run iperf3-srv_10.42.42.10(pid=15243): Launched 18:14:15.831036 tst cs_paging_gprs_active.py:38: start network... 18:14:15.962218 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:14:16.500027 run create_hlr_db(pid=15244): Launched 18:14:16.680424 bus /sierra_2: Setting Powered False 18:14:17.699400 run create_hlr_db(pid=15244): Terminated: ok {rc=0} 18:14:18.112560 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15246): Launched 18:14:18.423677 run osmo-hlr_10.42.42.2(pid=15247): Launched 18:14:18.536811 run osmo-stp_10.42.42.5: Starting osmo-stp 18:14:19.072618 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15249): Launched 18:14:19.383380 run osmo-stp_10.42.42.5(pid=15250): Launched 18:14:19.494009 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:14:20.031682 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15252): Launched 18:14:20.141435 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:14:20.412737 run patchelf(pid=15253): Launched 18:14:20.593608 run osmo-stp_10.42.42.5(pid=15250): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15250)] 18:14:20.725609 run osmo-stp_10.42.42.5(pid=15250): stdout: | (launched: 2022-12-13_18:14:19.229051) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:14:20.858106 run osmo-stp_10.42.42.5(pid=15250): stderr: | �[0;m�[38;5;43m20221213181419398 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213181419398 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213181419398 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213181419399 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213181419399 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213181419399 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213181419399 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:14:20.985841 run osmo-stp_10.42.42.5(pid=15250): stdout: | (launched: 2022-12-13_18:14:19.229051) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:14:21.112659 run osmo-stp_10.42.42.5(pid=15250): stderr: | �[0;m�[38;5;43m20221213181419398 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213181419398 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213181419398 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213181419399 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213181419399 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213181419399 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213181419399 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:14:21.261635 run patchelf(pid=15253): Terminating (SIGINT) 18:14:21.437500 run patchelf(pid=15253): Terminated: ok {rc=0} 18:14:21.469649 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=15250): Process ended prematurely: osmo-stp_10.42.42.5(pid=15250) [trial-2392↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15250)] [trial-2392↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 18:14:21.478912 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 18:14:21.539691 run osmo-hlr_10.42.42.2(pid=15247): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15247)] 18:14:21.589268 run osmo-hlr_10.42.42.2(pid=15247): stdout: | (launched: 2022-12-13_18:14:18.269567) 18:14:21.639588 run osmo-hlr_10.42.42.2(pid=15247): stderr: | �[0;m�[1;31m20221213181418444 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213181418444 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213181418444 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213181418445 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213181418445 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213181418445 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213181418457 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213181418465 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213181418465 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213181418465 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:14:21.682490 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15240): Terminating (SIGTERM) 18:14:21.722772 run iperf3-srv_10.42.42.10(pid=15241): Terminating (SIGTERM) 18:14:21.763064 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15242): Terminating (SIGTERM) 18:14:21.803262 run iperf3-srv_10.42.42.10(pid=15243): Terminating (SIGTERM) 18:14:21.843419 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15246): Terminating (SIGTERM) 18:14:21.884492 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15249): Terminating (SIGTERM) 18:14:21.924734 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15252): Terminating (SIGTERM) 18:14:21.934143 --- ParallelTerminationStrategy: PID 15240 died... 18:14:21.987903 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15240): Terminated: ok {rc=0} 18:14:21.997696 --- ParallelTerminationStrategy: PID 15241 died... 18:14:22.050908 run iperf3-srv_10.42.42.10(pid=15241): Terminated {rc=256} 18:14:22.060498 --- ParallelTerminationStrategy: PID 15242 died... 18:14:22.113926 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15242): Terminated: ok {rc=0} 18:14:22.123509 --- ParallelTerminationStrategy: PID 15243 died... 18:14:22.176903 run iperf3-srv_10.42.42.10(pid=15243): Terminated {rc=256} 18:14:22.186610 --- ParallelTerminationStrategy: PID 15246 died... 18:14:22.240121 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15246): Terminated: ok {rc=0} 18:14:22.249895 --- ParallelTerminationStrategy: PID 15249 died... 18:14:22.303361 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15249): Terminated: ok {rc=0} 18:14:22.313079 --- ParallelTerminationStrategy: PID 15252 died... 18:14:22.366594 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15252): Terminated: ok {rc=0} 18:14:22.450897 bus /gobi_0: Setting Powered False 18:14:23.558691 bus /gobi_0: Setting Powered False 18:14:24.668893 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15250): Process ended prematurely: osmo-stp_10.42.42.5(pid=15250) [trial-2392↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15250)]