Failed
gprs:nanobts+band-900.cs_paging_gprs_active.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=16226): Process ended prematurely: osmo-stp_10.42.42.5(pid=16226) [trial-2392↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16226)]
Standard Output
---------------------------------------------- trial-2392 gprs:nanobts+band-900 cs_paging_gprs_active.py ---------------------------------------------- 18:20:30.034169 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:20:30.045078 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 18:20:30.191482 tst cs_paging_gprs_active.py: using LAC 35406 18:20:30.325256 tst cs_paging_gprs_active.py: using RAC 216 18:20:30.447362 tst cs_paging_gprs_active.py: using CellId 35406 18:20:30.579449 tst cs_paging_gprs_active.py: using BVCI 35407 18:20:30.605453 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:20:30.617121 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:20:30.628276 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:20:30.639550 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:20:30.651573 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:20:30.663906 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:20:30.676092 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:20:30.688064 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:20:30.700513 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 18:20:30.822116 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 18:20:31.127972 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:20:31.261182 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:20:31.606962 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16216): Launched 18:20:31.933631 run iperf3-srv_10.42.42.10(pid=16217): Launched 18:20:32.163819 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:20:32.296079 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:20:32.623499 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16218): Launched 18:20:32.895225 run iperf3-srv_10.42.42.10(pid=16219): Launched 18:20:33.084585 tst cs_paging_gprs_active.py:38: start network... 18:20:33.213926 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:20:33.714434 run create_hlr_db(pid=16220): Launched 18:20:33.893824 bus /sierra_2: Setting Powered False 18:20:34.915830 run create_hlr_db(pid=16220): Terminated: ok {rc=0} 18:20:35.361603 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16222): Launched 18:20:35.697639 run osmo-hlr_10.42.42.2(pid=16223): Launched 18:20:35.821101 run osmo-stp_10.42.42.5: Starting osmo-stp 18:20:36.401126 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16225): Launched 18:20:36.736296 run osmo-stp_10.42.42.5(pid=16226): Launched 18:20:36.856452 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:20:37.438567 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16228): Launched 18:20:37.558374 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:20:37.850508 run patchelf(pid=16229): Launched 18:20:38.045465 run osmo-stp_10.42.42.5(pid=16226): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16226)] 18:20:38.187999 run osmo-stp_10.42.42.5(pid=16226): stdout: | (launched: 2022-12-13_18:20:36.570648) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:20:38.330901 run osmo-stp_10.42.42.5(pid=16226): stderr: | �[0;m�[38;5;43m20221213182036765 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213182036765 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213182036766 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213182036766 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213182036766 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213182036766 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213182036767 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:20:38.468103 run osmo-stp_10.42.42.5(pid=16226): stdout: | (launched: 2022-12-13_18:20:36.570648) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:20:38.604543 run osmo-stp_10.42.42.5(pid=16226): stderr: | �[0;m�[38;5;43m20221213182036765 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213182036765 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213182036766 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213182036766 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213182036766 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213182036766 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213182036767 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:20:38.764452 run patchelf(pid=16229): Terminating (SIGINT) 18:20:38.952571 run patchelf(pid=16229): Terminated: ok {rc=0} 18:20:38.987324 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=16226): Process ended prematurely: osmo-stp_10.42.42.5(pid=16226) [trial-2392↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16226)] [trial-2392↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38] 18:20:38.997310 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 18:20:39.061615 run osmo-hlr_10.42.42.2(pid=16223): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:nanobts+band-900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16223)] 18:20:39.114037 run osmo-hlr_10.42.42.2(pid=16223): stdout: | (launched: 2022-12-13_18:20:35.530835) 18:20:39.167198 run osmo-hlr_10.42.42.2(pid=16223): stderr: | �[0;m�[1;31m20221213182035732 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213182035732 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213182035732 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213182035732 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213182035732 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213182035732 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213182035750 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:nanobts+band-900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213182035760 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213182035760 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213182035760 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:20:39.212360 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16216): Terminating (SIGTERM) 18:20:39.255040 run iperf3-srv_10.42.42.10(pid=16217): Terminating (SIGTERM) 18:20:39.297717 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16218): Terminating (SIGTERM) 18:20:39.340181 run iperf3-srv_10.42.42.10(pid=16219): Terminating (SIGTERM) 18:20:39.382682 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16222): Terminating (SIGTERM) 18:20:39.425239 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16225): Terminating (SIGTERM) 18:20:39.467716 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16228): Terminating (SIGTERM) 18:20:39.477741 --- ParallelTerminationStrategy: PID 16216 died... 18:20:39.535135 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16216): Terminated: ok {rc=0} 18:20:39.545525 --- ParallelTerminationStrategy: PID 16217 died... 18:20:39.602013 run iperf3-srv_10.42.42.10(pid=16217): Terminated {rc=256} 18:20:39.612102 --- ParallelTerminationStrategy: PID 16218 died... 18:20:39.668788 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16218): Terminated: ok {rc=0} 18:20:39.678969 --- ParallelTerminationStrategy: PID 16219 died... 18:20:39.735593 run iperf3-srv_10.42.42.10(pid=16219): Terminated {rc=256} 18:20:39.745747 --- ParallelTerminationStrategy: PID 16222 died... 18:20:39.802544 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16222): Terminated: ok {rc=0} 18:20:39.812640 --- ParallelTerminationStrategy: PID 16225 died... 18:20:39.869187 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16225): Terminated: ok {rc=0} 18:20:39.879314 --- ParallelTerminationStrategy: PID 16228 died... 18:20:39.936047 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16228): Terminated: ok {rc=0} 18:20:40.023918 bus /gobi_0: Setting Powered False 18:20:41.131152 bus /gobi_0: Setting Powered False 18:20:42.244060 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16226): Process ended prematurely: osmo-stp_10.42.42.5(pid=16226) [trial-2392↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16226)]