Failed
gprs:oc2g+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=10656): Process ended prematurely: osmo-stp_10.42.42.5(pid=10656) [trial-2392↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10656)]
Standard Output
---------------------------------------------- trial-2392 gprs:oc2g+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 17:27:54.769075 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:27:54.781425 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 17:27:54.936729 tst ping_idle_ping.py: using LAC 35128 17:27:55.065270 tst ping_idle_ping.py: using RAC 193 17:27:55.191850 tst ping_idle_ping.py: using CellId 35128 17:27:55.318492 tst ping_idle_ping.py: using BVCI 35129 17:27:55.343419 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:27:55.354973 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:27:55.366321 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:27:55.377498 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:27:55.388815 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:27:55.400377 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:27:55.412042 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:27:55.423556 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 17:27:55.705613 tst ping_idle_ping.py:24: start network... 17:27:55.832233 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:27:56.327361 run create_hlr_db(pid=10650): Launched 17:27:56.503718 bus /gobi_6: Setting Powered False 17:27:57.524381 run create_hlr_db(pid=10650): Terminated: ok {rc=0} 17:27:57.930052 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10652): Launched 17:27:58.232699 run osmo-hlr_10.42.42.2(pid=10653): Launched 17:27:58.342863 run osmo-stp_10.42.42.5: Starting osmo-stp 17:27:58.871163 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10655): Launched 17:27:59.175746 run osmo-stp_10.42.42.5(pid=10656): Launched 17:27:59.286132 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:27:59.815859 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10658): Launched 17:27:59.924373 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:28:00.189612 run patchelf(pid=10659): Launched 17:28:00.367327 run osmo-stp_10.42.42.5(pid=10656): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10656)] 17:28:00.497848 run osmo-stp_10.42.42.5(pid=10656): stdout: | (launched: 2022-12-13_17:27:59.026699) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:28:00.628701 run osmo-stp_10.42.42.5(pid=10656): stderr: | �[0;m�[38;5;43m20221213172759194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213172759194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213172759194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213172759194 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213172759195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213172759195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213172759195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:28:00.754687 run osmo-stp_10.42.42.5(pid=10656): stdout: | (launched: 2022-12-13_17:27:59.026699) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:28:00.879663 run osmo-stp_10.42.42.5(pid=10656): stderr: | �[0;m�[38;5;43m20221213172759194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213172759194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213172759194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213172759194 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213172759195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213172759195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213172759195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:28:01.029800 run patchelf(pid=10659): Terminating (SIGINT) 17:28:01.205737 run patchelf(pid=10659): Terminated: ok {rc=0} 17:28:01.238052 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=10656): Process ended prematurely: osmo-stp_10.42.42.5(pid=10656) [trial-2392↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10656)] [trial-2392↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 17:28:01.247715 tst ping_idle_ping.py:27: Test FAILED (6.5 sec) 17:28:01.309813 run osmo-hlr_10.42.42.2(pid=10653): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10653)] 17:28:01.360645 run osmo-hlr_10.42.42.2(pid=10653): stdout: | (launched: 2022-12-13_17:27:58.084111) 17:28:01.412575 run osmo-hlr_10.42.42.2(pid=10653): stderr: | �[0;m�[1;31m20221213172758260 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213172758260 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213172758260 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213172758261 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213172758261 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213172758261 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213172758273 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:oc2g+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213172758282 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213172758282 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213172758282 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:28:01.456836 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10652): Terminating (SIGTERM) 17:28:01.498447 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10655): Terminating (SIGTERM) 17:28:01.539439 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10658): Terminating (SIGTERM) 17:28:01.549716 --- ParallelTerminationStrategy: PID 10652 died... 17:28:01.606763 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10652): Terminated: ok {rc=0} 17:28:01.616855 --- ParallelTerminationStrategy: PID 10655 died... 17:28:01.671907 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10655): Terminated: ok {rc=0} 17:28:01.682014 --- ParallelTerminationStrategy: PID 10658 died... 17:28:01.736580 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10658): Terminated: ok {rc=0} 17:28:01.828179 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10656): Process ended prematurely: osmo-stp_10.42.42.5(pid=10656) [trial-2392↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10656)]