Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=10465): Process ended prematurely: osmo-stp_10.42.42.5(pid=10465) [trial-2392↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10465)]
Standard Output
---------------------------------------------- trial-2392 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 17:25:03.470109 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:25:03.481216 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 17:25:03.614056 tst cs_paging_gprs_active.py: using LAC 35114 17:25:03.747837 tst cs_paging_gprs_active.py: using RAC 179 17:25:03.875670 tst cs_paging_gprs_active.py: using CellId 35114 17:25:04.004712 tst cs_paging_gprs_active.py: using BVCI 35115 17:25:04.030001 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:25:04.041209 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:25:04.052129 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:25:04.063205 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:25:04.074936 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:25:04.086659 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:25:04.098519 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:25:04.110231 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:25:04.122125 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 17:25:04.245238 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 17:25:04.528878 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:25:04.656648 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:25:04.976231 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10455): Launched 17:25:05.240032 run iperf3-srv_10.42.42.10(pid=10456): Launched 17:25:05.427572 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:25:05.554953 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:25:05.874673 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10457): Launched 17:25:06.140718 run iperf3-srv_10.42.42.10(pid=10458): Launched 17:25:06.327588 tst cs_paging_gprs_active.py:38: start network... 17:25:06.455093 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:25:06.950733 run create_hlr_db(pid=10459): Launched 17:25:07.127743 bus /gobi_6: Setting Powered False 17:25:08.149825 run create_hlr_db(pid=10459): Terminated: ok {rc=0} 17:25:08.587268 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10461): Launched 17:25:08.918350 run osmo-hlr_10.42.42.2(pid=10462): Launched 17:25:09.040487 run osmo-stp_10.42.42.5: Starting osmo-stp 17:25:09.609303 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10464): Launched 17:25:09.916637 run osmo-stp_10.42.42.5(pid=10465): Launched 17:25:10.039867 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:25:10.579834 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10467): Launched 17:25:10.689066 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:25:10.959005 run patchelf(pid=10468): Launched 17:25:11.139318 run osmo-stp_10.42.42.5(pid=10465): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10465)] 17:25:11.271063 run osmo-stp_10.42.42.5(pid=10465): stdout: | (launched: 2022-12-13_17:25:09.766747) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:25:11.403071 run osmo-stp_10.42.42.5(pid=10465): stderr: | �[0;m�[38;5;43m20221213172509936 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213172509936 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213172509936 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213172509937 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213172509937 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213172509937 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213172509937 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:25:11.530355 run osmo-stp_10.42.42.5(pid=10465): stdout: | (launched: 2022-12-13_17:25:09.766747) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:25:11.656922 run osmo-stp_10.42.42.5(pid=10465): stderr: | �[0;m�[38;5;43m20221213172509936 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213172509936 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213172509936 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213172509937 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213172509937 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213172509937 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213172509937 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:25:11.804800 run patchelf(pid=10468): Terminating (SIGINT) 17:25:11.979759 run patchelf(pid=10468): Terminated: ok {rc=0} 17:25:12.011691 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10465): Process ended prematurely: osmo-stp_10.42.42.5(pid=10465) [trial-2392↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10465)] [trial-2392↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 17:25:12.020983 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 17:25:12.081850 run osmo-hlr_10.42.42.2(pid=10462): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10462)] 17:25:12.131603 run osmo-hlr_10.42.42.2(pid=10462): stdout: | (launched: 2022-12-13_17:25:08.755053) 17:25:12.182110 run osmo-hlr_10.42.42.2(pid=10462): stderr: | �[0;m�[1;31m20221213172508949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213172508949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213172508949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213172508949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213172508949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213172508949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213172508962 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213172508970 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213172508971 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213172508971 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:25:12.225402 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10455): Terminating (SIGTERM) 17:25:12.265905 run iperf3-srv_10.42.42.10(pid=10456): Terminating (SIGTERM) 17:25:12.306495 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10457): Terminating (SIGTERM) 17:25:12.347112 run iperf3-srv_10.42.42.10(pid=10458): Terminating (SIGTERM) 17:25:12.387733 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10461): Terminating (SIGTERM) 17:25:12.428243 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10464): Terminating (SIGTERM) 17:25:12.469040 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10467): Terminating (SIGTERM) 17:25:12.478330 --- ParallelTerminationStrategy: PID 10455 died... 17:25:12.532896 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10455): Terminated: ok {rc=0} 17:25:12.542678 --- ParallelTerminationStrategy: PID 10456 died... 17:25:12.596401 run iperf3-srv_10.42.42.10(pid=10456): Terminated {rc=256} 17:25:12.605996 --- ParallelTerminationStrategy: PID 10457 died... 17:25:12.659643 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10457): Terminated: ok {rc=0} 17:25:12.669317 --- ParallelTerminationStrategy: PID 10458 died... 17:25:12.722835 run iperf3-srv_10.42.42.10(pid=10458): Terminated {rc=256} 17:25:12.732467 --- ParallelTerminationStrategy: PID 10461 died... 17:25:12.786456 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10461): Terminated: ok {rc=0} 17:25:12.796097 --- ParallelTerminationStrategy: PID 10464 died... 17:25:12.849918 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10464): Terminated: ok {rc=0} 17:25:12.859483 --- ParallelTerminationStrategy: PID 10467 died... 17:25:12.913119 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10467): Terminated: ok {rc=0} 17:25:13.002584 bus /gobi_0: Setting Powered False 17:25:14.109433 bus /gobi_0: Setting Powered False 17:25:15.222010 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10465): Process ended prematurely: osmo-stp_10.42.42.5(pid=10465) [trial-2392↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10465)]