Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=9710): Process ended prematurely: osmo-stp_10.42.42.5(pid=9710) [trial-2392↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9710)]
Standard Output
---------------------------------------------- trial-2392 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 17:18:01.165333 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:18:01.176227 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 17:18:01.323911 tst cs_paging_gprs_active.py: using LAC 35077 17:18:01.447301 tst cs_paging_gprs_active.py: using RAC 142 17:18:01.575846 tst cs_paging_gprs_active.py: using CellId 35077 17:18:01.725726 tst cs_paging_gprs_active.py: using BVCI 35078 17:18:01.750857 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:18:01.762487 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:18:01.773932 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:18:01.785429 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:18:01.797185 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:18:01.809109 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:18:01.821021 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:18:01.832744 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:18:01.845257 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 17:18:01.992034 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 17:18:02.316621 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:18:02.447717 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:18:02.774075 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9700): Launched 17:18:03.044347 run iperf3-srv_10.42.42.10(pid=9701): Launched 17:18:03.234371 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:18:03.364779 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:18:03.690819 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9702): Launched 17:18:03.962483 run iperf3-srv_10.42.42.10(pid=9703): Launched 17:18:04.154924 tst cs_paging_gprs_active.py:38: start network... 17:18:04.286320 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:18:04.790020 run create_hlr_db(pid=9704): Launched 17:18:04.969673 bus /gobi_6: Setting Powered False 17:18:05.990415 run create_hlr_db(pid=9704): Terminated: ok {rc=0} 17:18:06.410461 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9706): Launched 17:18:06.728523 run osmo-hlr_10.42.42.2(pid=9707): Launched 17:18:06.842646 run osmo-stp_10.42.42.5: Starting osmo-stp 17:18:07.386262 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9709): Launched 17:18:07.700126 run osmo-stp_10.42.42.5(pid=9710): Launched 17:18:07.813542 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:18:08.361437 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9712): Launched 17:18:08.472729 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:18:08.748151 run patchelf(pid=9713): Launched 17:18:08.930710 run osmo-stp_10.42.42.5(pid=9710): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9710)] 17:18:09.064247 run osmo-stp_10.42.42.5(pid=9710): stdout: | (launched: 2022-12-13_17:18:07.545379) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:18:09.198225 run osmo-stp_10.42.42.5(pid=9710): stderr: | �[0;m�[38;5;43m20221213171807718 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213171807718 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213171807718 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213171807718 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213171807720 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213171807721 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213171807721 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:18:09.326994 run osmo-stp_10.42.42.5(pid=9710): stdout: | (launched: 2022-12-13_17:18:07.545379) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:18:09.454503 run osmo-stp_10.42.42.5(pid=9710): stderr: | �[0;m�[38;5;43m20221213171807718 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213171807718 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213171807718 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213171807718 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213171807720 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213171807721 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213171807721 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:18:09.604198 run patchelf(pid=9713): Terminating (SIGINT) 17:18:09.781505 run patchelf(pid=9713): Terminated: ok {rc=0} 17:18:09.813792 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=9710): Process ended prematurely: osmo-stp_10.42.42.5(pid=9710) [trial-2392↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9710)] [trial-2392↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 17:18:09.822841 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 17:18:09.883181 run osmo-hlr_10.42.42.2(pid=9707): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9707)] 17:18:09.932551 run osmo-hlr_10.42.42.2(pid=9707): stdout: | (launched: 2022-12-13_17:18:06.570574) 17:18:09.982574 run osmo-hlr_10.42.42.2(pid=9707): stderr: | �[0;m�[1;31m20221213171806754 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213171806754 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213171806754 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213171806754 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213171806754 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213171806754 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213171806767 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213171806778 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213171806778 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213171806778 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:18:10.025096 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9700): Terminating (SIGTERM) 17:18:10.065015 run iperf3-srv_10.42.42.10(pid=9701): Terminating (SIGTERM) 17:18:10.104924 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9702): Terminating (SIGTERM) 17:18:10.144896 run iperf3-srv_10.42.42.10(pid=9703): Terminating (SIGTERM) 17:18:10.184940 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9706): Terminating (SIGTERM) 17:18:10.224862 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9709): Terminating (SIGTERM) 17:18:10.264753 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9712): Terminating (SIGTERM) 17:18:10.273981 --- ParallelTerminationStrategy: PID 9700 died... 17:18:10.328249 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9700): Terminated: ok {rc=0} 17:18:10.337901 --- ParallelTerminationStrategy: PID 9701 died... 17:18:10.391299 run iperf3-srv_10.42.42.10(pid=9701): Terminated {rc=256} 17:18:10.400872 --- ParallelTerminationStrategy: PID 9702 died... 17:18:10.454221 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9702): Terminated: ok {rc=0} 17:18:10.463776 --- ParallelTerminationStrategy: PID 9703 died... 17:18:10.516866 run iperf3-srv_10.42.42.10(pid=9703): Terminated {rc=256} 17:18:10.526499 --- ParallelTerminationStrategy: PID 9706 died... 17:18:10.579919 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9706): Terminated: ok {rc=0} 17:18:10.589622 --- ParallelTerminationStrategy: PID 9709 died... 17:18:10.642937 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9709): Terminated: ok {rc=0} 17:18:10.652489 --- ParallelTerminationStrategy: PID 9712 died... 17:18:10.706111 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9712): Terminated: ok {rc=0} 17:18:10.794576 bus /gobi_0: Setting Powered False 17:18:11.898988 bus /gobi_0: Setting Powered False 17:18:13.012333 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9710): Process ended prematurely: osmo-stp_10.42.42.5(pid=9710) [trial-2392↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9710)]