Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=11079): Process ended prematurely: osmo-stp_10.42.42.5(pid=11079) [trial-2392↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11079)]
Standard Output
---------------------------------------------- trial-2392 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 17:33:43.056686 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:33:43.067951 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 17:33:43.214629 tst cs_paging_gprs_active.py: using LAC 35160 17:33:43.348625 tst cs_paging_gprs_active.py: using RAC 225 17:33:43.481934 tst cs_paging_gprs_active.py: using CellId 35160 17:33:43.615012 tst cs_paging_gprs_active.py: using BVCI 35161 17:33:43.640751 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:33:43.652144 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:33:43.663833 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:33:43.675151 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:33:43.686754 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:33:43.698297 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:33:43.710166 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:33:43.721669 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:33:43.733414 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 17:33:43.854223 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 17:33:44.141253 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:33:44.271062 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:33:44.596050 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11069): Launched 17:33:44.865739 run iperf3-srv_10.42.42.10(pid=11070): Launched 17:33:45.056492 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:33:45.187000 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:33:45.512301 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11071): Launched 17:33:45.782780 run iperf3-srv_10.42.42.10(pid=11072): Launched 17:33:46.008193 tst cs_paging_gprs_active.py:38: start network... 17:33:46.154581 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:33:46.702480 run create_hlr_db(pid=11073): Launched 17:33:46.902852 bus /gobi_6: Setting Powered False 17:33:47.918217 run create_hlr_db(pid=11073): Terminated: ok {rc=0} 17:33:48.348788 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11075): Launched 17:33:48.684573 run osmo-hlr_10.42.42.2(pid=11076): Launched 17:33:48.805744 run osmo-stp_10.42.42.5: Starting osmo-stp 17:33:49.389315 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11078): Launched 17:33:49.722327 run osmo-stp_10.42.42.5(pid=11079): Launched 17:33:49.843422 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:33:50.426526 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11081): Launched 17:33:50.545996 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:33:50.837238 run patchelf(pid=11082): Launched 17:33:51.033484 run osmo-stp_10.42.42.5(pid=11079): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11079)] 17:33:51.177743 run osmo-stp_10.42.42.5(pid=11079): stdout: | (launched: 2022-12-13_17:33:49.558864) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:33:51.321281 run osmo-stp_10.42.42.5(pid=11079): stderr: | �[0;m�[38;5;43m20221213173349749 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213173349749 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213173349749 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213173349750 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213173349750 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213173349750 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213173349750 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:33:51.459743 run osmo-stp_10.42.42.5(pid=11079): stdout: | (launched: 2022-12-13_17:33:49.558864) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:33:51.597190 run osmo-stp_10.42.42.5(pid=11079): stderr: | �[0;m�[38;5;43m20221213173349749 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213173349749 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213173349749 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213173349750 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213173349750 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213173349750 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213173349750 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:33:51.758701 run patchelf(pid=11082): Terminating (SIGINT) 17:33:51.949200 run patchelf(pid=11082): Terminated: ok {rc=0} 17:33:51.983947 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11079): Process ended prematurely: osmo-stp_10.42.42.5(pid=11079) [trial-2392↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11079)] [trial-2392↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 17:33:51.993897 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 17:33:52.059040 run osmo-hlr_10.42.42.2(pid=11076): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11076)] 17:33:52.112109 run osmo-hlr_10.42.42.2(pid=11076): stdout: | (launched: 2022-12-13_17:33:48.519429) 17:33:52.166190 run osmo-hlr_10.42.42.2(pid=11076): stderr: | �[0;m�[1;31m20221213173348718 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213173348718 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213173348718 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213173348718 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213173348718 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213173348718 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213173348729 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213173348738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213173348738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213173348738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:33:52.212383 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11069): Terminating (SIGTERM) 17:33:52.256006 run iperf3-srv_10.42.42.10(pid=11070): Terminating (SIGTERM) 17:33:52.299389 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11071): Terminating (SIGTERM) 17:33:52.342629 run iperf3-srv_10.42.42.10(pid=11072): Terminating (SIGTERM) 17:33:52.385828 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11075): Terminating (SIGTERM) 17:33:52.428736 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11078): Terminating (SIGTERM) 17:33:52.472061 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11081): Terminating (SIGTERM) 17:33:52.481932 --- ParallelTerminationStrategy: PID 11069 died... 17:33:52.539328 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11069): Terminated: ok {rc=0} 17:33:52.549573 --- ParallelTerminationStrategy: PID 11070 died... 17:33:52.606326 run iperf3-srv_10.42.42.10(pid=11070): Terminated {rc=256} 17:33:52.616411 --- ParallelTerminationStrategy: PID 11071 died... 17:33:52.673609 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11071): Terminated: ok {rc=0} 17:33:52.683880 --- ParallelTerminationStrategy: PID 11072 died... 17:33:52.741063 run iperf3-srv_10.42.42.10(pid=11072): Terminated {rc=256} 17:33:52.751317 --- ParallelTerminationStrategy: PID 11075 died... 17:33:52.808556 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11075): Terminated: ok {rc=0} 17:33:52.818912 --- ParallelTerminationStrategy: PID 11078 died... 17:33:52.875917 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11078): Terminated: ok {rc=0} 17:33:52.886108 --- ParallelTerminationStrategy: PID 11081 died... 17:33:52.943344 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11081): Terminated: ok {rc=0} 17:33:53.031164 bus /gobi_0: Setting Powered False 17:33:54.139256 bus /gobi_0: Setting Powered False 17:33:55.248829 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11079): Process ended prematurely: osmo-stp_10.42.42.5(pid=11079) [trial-2392↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11079)]