Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=14485): Process ended prematurely: osmo-stp_10.42.42.5(pid=14485) [trial-2392↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14485)]
Standard Output
---------------------------------------------- trial-2392 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 18:06:58.401516 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:06:58.412257 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 18:06:58.546846 tst cs_paging_gprs_active.py: using LAC 35335 18:06:58.668903 tst cs_paging_gprs_active.py: using RAC 145 18:06:58.789318 tst cs_paging_gprs_active.py: using CellId 35335 18:06:58.910654 tst cs_paging_gprs_active.py: using BVCI 35336 18:06:58.934350 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:06:58.945275 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:06:58.955762 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:06:58.966432 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:06:58.977486 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:06:58.988082 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:06:58.998821 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:06:59.009331 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:06:59.019977 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 18:06:59.143553 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 18:06:59.430571 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:06:59.560571 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:06:59.884067 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14475): Launched 18:07:00.152631 run iperf3-srv_10.42.42.10(pid=14476): Launched 18:07:00.341268 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:07:00.469938 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:07:00.793904 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14477): Launched 18:07:01.110348 run iperf3-srv_10.42.42.10(pid=14478): Launched 18:07:01.305317 tst cs_paging_gprs_active.py:38: start network... 18:07:01.438470 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:07:01.981714 run create_hlr_db(pid=14479): Launched 18:07:02.181399 bus /sierra_2: Setting Powered False 18:07:03.196586 run create_hlr_db(pid=14479): Terminated: ok {rc=0} 18:07:03.619573 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14481): Launched 18:07:03.930862 run osmo-hlr_10.42.42.2(pid=14482): Launched 18:07:04.053200 run osmo-stp_10.42.42.5: Starting osmo-stp 18:07:04.601544 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14484): Launched 18:07:04.912540 run osmo-stp_10.42.42.5(pid=14485): Launched 18:07:05.024313 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:07:05.567702 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14487): Launched 18:07:05.679250 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:07:05.953077 run patchelf(pid=14488): Launched 18:07:06.135387 run osmo-stp_10.42.42.5(pid=14485): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14485)] 18:07:06.268835 run osmo-stp_10.42.42.5(pid=14485): stdout: | (launched: 2022-12-13_18:07:04.759374) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:07:06.401936 run osmo-stp_10.42.42.5(pid=14485): stderr: | �[0;m�[38;5;43m20221213180704932 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213180704932 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213180704932 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213180704934 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213180704934 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213180704934 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213180704934 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:07:06.529995 run osmo-stp_10.42.42.5(pid=14485): stdout: | (launched: 2022-12-13_18:07:04.759374) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:07:06.656613 run osmo-stp_10.42.42.5(pid=14485): stderr: | �[0;m�[38;5;43m20221213180704932 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213180704932 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213180704932 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213180704934 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213180704934 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213180704934 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213180704934 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:07:06.805969 run patchelf(pid=14488): Terminating (SIGINT) 18:07:06.982501 run patchelf(pid=14488): Terminated: ok {rc=0} 18:07:07.014795 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14485): Process ended prematurely: osmo-stp_10.42.42.5(pid=14485) [trial-2392↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14485)] [trial-2392↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 18:07:07.024059 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 18:07:07.085191 run osmo-hlr_10.42.42.2(pid=14482): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14482)] 18:07:07.134963 run osmo-hlr_10.42.42.2(pid=14482): stdout: | (launched: 2022-12-13_18:07:03.777215) 18:07:07.185637 run osmo-hlr_10.42.42.2(pid=14482): stderr: | �[0;m�[1;31m20221213180703954 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213180703954 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213180703954 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213180703954 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213180703954 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213180703954 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213180703966 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213180703975 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213180703975 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213180703975 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:07:07.228523 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14475): Terminating (SIGTERM) 18:07:07.269071 run iperf3-srv_10.42.42.10(pid=14476): Terminating (SIGTERM) 18:07:07.309554 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14477): Terminating (SIGTERM) 18:07:07.349754 run iperf3-srv_10.42.42.10(pid=14478): Terminating (SIGTERM) 18:07:07.390092 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14481): Terminating (SIGTERM) 18:07:07.430371 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14484): Terminating (SIGTERM) 18:07:07.470747 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14487): Terminating (SIGTERM) 18:07:07.480243 --- ParallelTerminationStrategy: PID 14475 died... 18:07:07.534531 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14475): Terminated: ok {rc=0} 18:07:07.544303 --- ParallelTerminationStrategy: PID 14476 died... 18:07:07.598348 run iperf3-srv_10.42.42.10(pid=14476): Terminated {rc=256} 18:07:07.608288 --- ParallelTerminationStrategy: PID 14477 died... 18:07:07.662326 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14477): Terminated: ok {rc=0} 18:07:07.672132 --- ParallelTerminationStrategy: PID 14478 died... 18:07:07.725916 run iperf3-srv_10.42.42.10(pid=14478): Terminated {rc=256} 18:07:07.735729 --- ParallelTerminationStrategy: PID 14481 died... 18:07:07.789280 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14481): Terminated: ok {rc=0} 18:07:07.799026 --- ParallelTerminationStrategy: PID 14484 died... 18:07:07.852447 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14484): Terminated: ok {rc=0} 18:07:07.862249 --- ParallelTerminationStrategy: PID 14487 died... 18:07:07.915723 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14487): Terminated: ok {rc=0} 18:07:08.004242 bus /gobi_0: Setting Powered False 18:07:09.109349 bus /gobi_0: Setting Powered False 18:07:10.222673 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14485): Process ended prematurely: osmo-stp_10.42.42.5(pid=14485) [trial-2392↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14485)]