Failed
gprs:trx-lms.cs_paging_gprs_active.py (from gprs_trx-lms)
Stacktrace
osmo-stp_10.42.42.5(pid=13908): Process ended prematurely: osmo-stp_10.42.42.5(pid=13908) [trial-2392↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13908)]
Standard Output
---------------------------------------------- trial-2392 gprs:trx-lms cs_paging_gprs_active.py ---------------------------------------------- 17:59:02.716463 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 17:59:02.727586 tst gprs:trx-lms: Using 1 x bts (candidates: 1) 17:59:02.867119 tst cs_paging_gprs_active.py: using LAC 35293 17:59:02.988610 tst cs_paging_gprs_active.py: using RAC 103 17:59:03.109920 tst cs_paging_gprs_active.py: using CellId 35293 17:59:03.231589 tst cs_paging_gprs_active.py: using BVCI 35294 17:59:03.255435 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 17:59:03.266093 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 17:59:03.276545 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 17:59:03.286850 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 17:59:03.297108 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 17:59:03.308288 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 17:59:03.319322 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 17:59:03.330188 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 17:59:03.341107 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 17:59:03.463427 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 17:59:03.745361 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:59:03.872884 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:59:04.189776 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13898): Launched 17:59:04.452603 run iperf3-srv_10.42.42.10(pid=13899): Launched 17:59:04.638860 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:59:04.765225 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:59:05.081628 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13900): Launched 17:59:05.344238 run iperf3-srv_10.42.42.10(pid=13901): Launched 17:59:05.528851 tst cs_paging_gprs_active.py:38: start network... 17:59:05.654928 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:59:06.142717 run create_hlr_db(pid=13902): Launched 17:59:06.318412 bus /sierra_2: Setting Powered False 17:59:07.339122 run create_hlr_db(pid=13902): Terminated: ok {rc=0} 17:59:07.746818 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13904): Launched 17:59:08.051543 run osmo-hlr_10.42.42.2(pid=13905): Launched 17:59:08.162126 run osmo-stp_10.42.42.5: Starting osmo-stp 17:59:08.690878 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13907): Launched 17:59:08.996593 run osmo-stp_10.42.42.5(pid=13908): Launched 17:59:09.107241 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:59:09.639118 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13910): Launched 17:59:09.747443 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:59:10.015279 run patchelf(pid=13911): Launched 17:59:10.195421 run osmo-stp_10.42.42.5(pid=13908): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13908)] 17:59:10.326612 run osmo-stp_10.42.42.5(pid=13908): stdout: | (launched: 2022-12-13_17:59:08.846233) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:59:10.458100 run osmo-stp_10.42.42.5(pid=13908): stderr: | �[0;m�[38;5;43m20221213175909013 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213175909014 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213175909014 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213175909014 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213175909015 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213175909015 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213175909015 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:59:10.584219 run osmo-stp_10.42.42.5(pid=13908): stdout: | (launched: 2022-12-13_17:59:08.846233) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:59:10.709660 run osmo-stp_10.42.42.5(pid=13908): stderr: | �[0;m�[38;5;43m20221213175909013 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213175909014 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213175909014 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213175909014 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213175909015 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213175909015 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213175909015 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:59:10.856638 run patchelf(pid=13911): Terminating (SIGINT) 17:59:11.030597 run patchelf(pid=13911): Terminated: ok {rc=0} 17:59:11.062374 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13908): Process ended prematurely: osmo-stp_10.42.42.5(pid=13908) [trial-2392↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13908)] [trial-2392↪gprs:trx-lms↪cs_paging_gprs_active.py:38] 17:59:11.071688 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 17:59:11.131738 run osmo-hlr_10.42.42.2(pid=13905): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:trx-lms↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13905)] 17:59:11.180810 run osmo-hlr_10.42.42.2(pid=13905): stdout: | (launched: 2022-12-13_17:59:07.902314) 17:59:11.230373 run osmo-hlr_10.42.42.2(pid=13905): stderr: | �[0;m�[1;31m20221213175908076 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213175908076 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213175908076 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213175908076 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213175908076 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213175908076 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213175908091 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:trx-lms/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213175908102 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213175908102 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213175908102 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:59:11.272854 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13898): Terminating (SIGTERM) 17:59:11.312753 run iperf3-srv_10.42.42.10(pid=13899): Terminating (SIGTERM) 17:59:11.353048 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13900): Terminating (SIGTERM) 17:59:11.393062 run iperf3-srv_10.42.42.10(pid=13901): Terminating (SIGTERM) 17:59:11.433118 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13904): Terminating (SIGTERM) 17:59:11.473047 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13907): Terminating (SIGTERM) 17:59:11.513050 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13910): Terminating (SIGTERM) 17:59:11.522379 --- ParallelTerminationStrategy: PID 13898 died... 17:59:11.575927 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13898): Terminated: ok {rc=0} 17:59:11.585649 --- ParallelTerminationStrategy: PID 13899 died... 17:59:11.638702 run iperf3-srv_10.42.42.10(pid=13899): Terminated {rc=256} 17:59:11.648290 --- ParallelTerminationStrategy: PID 13900 died... 17:59:11.701721 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13900): Terminated: ok {rc=0} 17:59:11.711288 --- ParallelTerminationStrategy: PID 13901 died... 17:59:11.764480 run iperf3-srv_10.42.42.10(pid=13901): Terminated {rc=256} 17:59:11.774088 --- ParallelTerminationStrategy: PID 13904 died... 17:59:11.827666 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13904): Terminated: ok {rc=0} 17:59:11.837788 --- ParallelTerminationStrategy: PID 13907 died... 17:59:11.892037 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13907): Terminated: ok {rc=0} 17:59:11.902057 --- ParallelTerminationStrategy: PID 13910 died... 17:59:11.956099 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13910): Terminated: ok {rc=0} 17:59:12.044524 bus /gobi_0: Setting Powered False 17:59:13.147260 bus /gobi_0: Setting Powered False 17:59:14.257602 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13908): Process ended prematurely: osmo-stp_10.42.42.5(pid=13908) [trial-2392↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13908)]