Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=13155): Process ended prematurely: osmo-stp_10.42.42.5(pid=13155) [trial-2392↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13155)]
Standard Output
---------------------------------------------- trial-2392 gprs:trx-umtrx+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 17:52:05.269366 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:52:05.280126 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 17:52:05.437982 tst cs_paging_gprs_active.py: using LAC 35256 17:52:05.557852 tst cs_paging_gprs_active.py: using RAC 66 17:52:05.677909 tst cs_paging_gprs_active.py: using CellId 35256 17:52:05.798025 tst cs_paging_gprs_active.py: using BVCI 35257 17:52:05.821909 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:52:05.832659 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:52:05.843444 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:52:05.854132 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:52:05.865117 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:52:05.875788 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:52:05.886936 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:52:05.897930 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:52:05.908654 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 17:52:06.034179 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 17:52:06.337761 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:52:06.477552 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:52:06.825511 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13145): Launched 17:52:07.114817 run iperf3-srv_10.42.42.10(pid=13146): Launched 17:52:07.319840 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:52:07.459392 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:52:07.808065 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13147): Launched 17:52:08.096622 run iperf3-srv_10.42.42.10(pid=13148): Launched 17:52:08.301555 tst cs_paging_gprs_active.py:38: start network... 17:52:08.441160 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:52:08.971066 run create_hlr_db(pid=13149): Launched 17:52:09.150119 bus /gobi_6: Setting Powered False 17:52:10.171474 run create_hlr_db(pid=13149): Terminated: ok {rc=0} 17:52:10.616647 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13151): Launched 17:52:10.953904 run osmo-hlr_10.42.42.2(pid=13152): Launched 17:52:11.077403 run osmo-stp_10.42.42.5: Starting osmo-stp 17:52:11.658943 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13154): Launched 17:52:11.994761 run osmo-stp_10.42.42.5(pid=13155): Launched 17:52:12.115614 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:52:12.700523 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13157): Launched 17:52:12.820236 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:52:13.119627 run patchelf(pid=13158): Launched 17:52:13.315744 run osmo-stp_10.42.42.5(pid=13155): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13155)] 17:52:13.458868 run osmo-stp_10.42.42.5(pid=13155): stdout: | (launched: 2022-12-13_17:52:11.829484) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:52:13.602199 run osmo-stp_10.42.42.5(pid=13155): stderr: | �[0;m�[38;5;43m20221213175212021 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213175212022 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213175212022 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213175212022 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213175212023 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213175212023 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213175212023 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:52:13.741015 run osmo-stp_10.42.42.5(pid=13155): stdout: | (launched: 2022-12-13_17:52:11.829484) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:52:13.877736 run osmo-stp_10.42.42.5(pid=13155): stderr: | �[0;m�[38;5;43m20221213175212021 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213175212022 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213175212022 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213175212022 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213175212023 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213175212023 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213175212023 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:52:14.038242 run patchelf(pid=13158): Terminating (SIGINT) 17:52:14.226987 run patchelf(pid=13158): Terminated: ok {rc=0} 17:52:14.261493 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13155): Process ended prematurely: osmo-stp_10.42.42.5(pid=13155) [trial-2392↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13155)] [trial-2392↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 17:52:14.271448 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 17:52:14.336108 run osmo-hlr_10.42.42.2(pid=13152): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13152)] 17:52:14.388597 run osmo-hlr_10.42.42.2(pid=13152): stdout: | (launched: 2022-12-13_17:52:10.787344) 17:52:14.441927 run osmo-hlr_10.42.42.2(pid=13152): stderr: | �[0;m�[1;31m20221213175210985 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213175210985 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213175210985 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213175210985 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213175210985 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213175210985 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213175210997 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:trx-umtrx+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213175211005 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213175211006 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213175211006 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:52:14.487538 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13145): Terminating (SIGTERM) 17:52:14.530518 run iperf3-srv_10.42.42.10(pid=13146): Terminating (SIGTERM) 17:52:14.573594 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13147): Terminating (SIGTERM) 17:52:14.616346 run iperf3-srv_10.42.42.10(pid=13148): Terminating (SIGTERM) 17:52:14.659145 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13151): Terminating (SIGTERM) 17:52:14.702623 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13154): Terminating (SIGTERM) 17:52:14.745461 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13157): Terminating (SIGTERM) 17:52:14.755344 --- ParallelTerminationStrategy: PID 13145 died... 17:52:14.812920 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13145): Terminated: ok {rc=0} 17:52:14.823414 --- ParallelTerminationStrategy: PID 13146 died... 17:52:14.880585 run iperf3-srv_10.42.42.10(pid=13146): Terminated {rc=256} 17:52:14.890946 --- ParallelTerminationStrategy: PID 13147 died... 17:52:14.948225 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13147): Terminated: ok {rc=0} 17:52:14.958558 --- ParallelTerminationStrategy: PID 13148 died... 17:52:15.015637 run iperf3-srv_10.42.42.10(pid=13148): Terminated {rc=256} 17:52:15.026057 --- ParallelTerminationStrategy: PID 13151 died... 17:52:15.083270 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13151): Terminated: ok {rc=0} 17:52:15.094087 --- ParallelTerminationStrategy: PID 13154 died... 17:52:15.151467 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13154): Terminated: ok {rc=0} 17:52:15.161973 --- ParallelTerminationStrategy: PID 13157 died... 17:52:15.219265 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13157): Terminated: ok {rc=0} 17:52:15.307538 bus /gobi_0: Setting Powered False 17:52:16.411665 bus /gobi_0: Setting Powered False 17:52:17.520999 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13155): Process ended prematurely: osmo-stp_10.42.42.5(pid=13155) [trial-2392↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13155)]