Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=13086): Process ended prematurely: osmo-stp_10.42.42.5(pid=13086) [trial-2392↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13086)]
Standard Output
---------------------------------------------- trial-2392 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 17:51:04.545523 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:51:04.556825 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 17:51:04.697931 tst cs_paging_gprs_active.py: using LAC 35251 17:51:04.819122 tst cs_paging_gprs_active.py: using RAC 61 17:51:04.940338 tst cs_paging_gprs_active.py: using CellId 35251 17:51:05.062722 tst cs_paging_gprs_active.py: using BVCI 35252 17:51:05.086606 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:51:05.098080 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:51:05.108821 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:51:05.119703 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:51:05.130548 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:51:05.141618 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:51:05.152650 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:51:05.163597 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:51:05.174771 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 17:51:05.298551 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 17:51:05.602113 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:51:05.742664 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:51:06.091156 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13076): Launched 17:51:06.379154 run iperf3-srv_10.42.42.10(pid=13077): Launched 17:51:06.585650 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:51:06.726806 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:51:07.075310 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13078): Launched 17:51:07.363753 run iperf3-srv_10.42.42.10(pid=13079): Launched 17:51:07.569495 tst cs_paging_gprs_active.py:38: start network... 17:51:07.710188 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:51:08.238156 run create_hlr_db(pid=13080): Launched 17:51:08.432338 bus /gobi_6: Setting Powered False 17:51:09.452132 run create_hlr_db(pid=13080): Terminated: ok {rc=0} 17:51:09.871533 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13082): Launched 17:51:10.184071 run osmo-hlr_10.42.42.2(pid=13083): Launched 17:51:10.307145 run osmo-stp_10.42.42.5: Starting osmo-stp 17:51:10.847185 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13085): Launched 17:51:11.157612 run osmo-stp_10.42.42.5(pid=13086): Launched 17:51:11.270504 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:51:11.812860 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13088): Launched 17:51:11.923585 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:51:12.197729 run patchelf(pid=13089): Launched 17:51:12.379647 run osmo-stp_10.42.42.5(pid=13086): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13086)] 17:51:12.512433 run osmo-stp_10.42.42.5(pid=13086): stdout: | (launched: 2022-12-13_17:51:11.004650) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:51:12.645303 run osmo-stp_10.42.42.5(pid=13086): stderr: | �[0;m�[38;5;43m20221213175111174 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213175111175 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213175111175 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213175111175 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213175111176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213175111176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213175111176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:51:12.773301 run osmo-stp_10.42.42.5(pid=13086): stdout: | (launched: 2022-12-13_17:51:11.004650) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:51:12.899818 run osmo-stp_10.42.42.5(pid=13086): stderr: | �[0;m�[38;5;43m20221213175111174 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213175111175 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213175111175 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213175111175 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213175111176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213175111176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213175111176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:51:13.049305 run patchelf(pid=13089): Terminating (SIGINT) 17:51:13.225548 run patchelf(pid=13089): Terminated: ok {rc=0} 17:51:13.257762 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13086): Process ended prematurely: osmo-stp_10.42.42.5(pid=13086) [trial-2392↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13086)] [trial-2392↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 17:51:13.267034 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 17:51:13.327583 run osmo-hlr_10.42.42.2(pid=13083): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13083)] 17:51:13.376901 run osmo-hlr_10.42.42.2(pid=13083): stdout: | (launched: 2022-12-13_17:51:10.030637) 17:51:13.427014 run osmo-hlr_10.42.42.2(pid=13083): stderr: | �[0;m�[1;31m20221213175110208 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213175110208 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213175110208 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213175110208 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213175110208 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213175110208 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213175110221 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213175110230 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213175110230 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213175110230 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:51:13.471168 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13076): Terminating (SIGTERM) 17:51:13.511620 run iperf3-srv_10.42.42.10(pid=13077): Terminating (SIGTERM) 17:51:13.552022 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13078): Terminating (SIGTERM) 17:51:13.592351 run iperf3-srv_10.42.42.10(pid=13079): Terminating (SIGTERM) 17:51:13.632727 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13082): Terminating (SIGTERM) 17:51:13.673070 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13085): Terminating (SIGTERM) 17:51:13.713937 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13088): Terminating (SIGTERM) 17:51:13.723373 --- ParallelTerminationStrategy: PID 13076 died... 17:51:13.777428 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13076): Terminated: ok {rc=0} 17:51:13.787196 --- ParallelTerminationStrategy: PID 13077 died... 17:51:13.840877 run iperf3-srv_10.42.42.10(pid=13077): Terminated {rc=256} 17:51:13.850657 --- ParallelTerminationStrategy: PID 13078 died... 17:51:13.904083 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13078): Terminated: ok {rc=0} 17:51:13.913858 --- ParallelTerminationStrategy: PID 13079 died... 17:51:13.967045 run iperf3-srv_10.42.42.10(pid=13079): Terminated {rc=256} 17:51:13.976787 --- ParallelTerminationStrategy: PID 13082 died... 17:51:14.030485 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13082): Terminated: ok {rc=0} 17:51:14.040411 --- ParallelTerminationStrategy: PID 13085 died... 17:51:14.093953 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13085): Terminated: ok {rc=0} 17:51:14.103722 --- ParallelTerminationStrategy: PID 13088 died... 17:51:14.156970 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13088): Terminated: ok {rc=0} 17:51:14.245501 bus /gobi_0: Setting Powered False 17:51:15.349425 bus /gobi_0: Setting Powered False 17:51:16.491931 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13086): Process ended prematurely: osmo-stp_10.42.42.5(pid=13086) [trial-2392↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13086)]