Failed
gprs:trx-sysmocell5000.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000)
Stacktrace
osmo-stp_10.42.42.5(pid=21020): Process ended prematurely: osmo-stp_10.42.42.5(pid=21020) [trial-2393↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21020)]
Standard Output
---------------------------------------------- trial-2393 gprs:trx-sysmocell5000 cs_paging_gprs_active.py ---------------------------------------------- 19:09:53.731074 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 19:09:53.742503 tst gprs:trx-sysmocell5000: Using 1 x bts (candidates: 1) 19:09:53.889195 tst cs_paging_gprs_active.py: using LAC 35663 19:09:54.019007 tst cs_paging_gprs_active.py: using RAC 218 19:09:54.147279 tst cs_paging_gprs_active.py: using CellId 35663 19:09:54.270906 tst cs_paging_gprs_active.py: using BVCI 35664 19:09:54.294567 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 19:09:54.305530 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 19:09:54.316283 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 19:09:54.327095 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 19:09:54.337751 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 19:09:54.348362 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 19:09:54.359050 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 19:09:54.369630 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 19:09:54.380323 tst gprs:trx-sysmocell5000: Using 1 x modem (candidates: 4) 19:09:54.500358 tst gprs:trx-sysmocell5000: Using 1 x modem (candidates: 4) 19:09:54.782251 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:09:54.910028 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:09:55.228461 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21010): Launched 19:09:55.492662 run iperf3-srv_10.42.42.10(pid=21011): Launched 19:09:55.680003 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:09:55.806819 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:09:56.124302 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21012): Launched 19:09:56.388407 run iperf3-srv_10.42.42.10(pid=21013): Launched 19:09:56.575143 tst cs_paging_gprs_active.py:38: start network... 19:09:56.702431 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:09:57.194195 run create_hlr_db(pid=21014): Launched 19:09:57.370287 bus /sierra_2: Setting Powered False 19:09:58.392392 run create_hlr_db(pid=21014): Terminated: ok {rc=0} 19:09:58.831926 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21016): Launched 19:09:59.165306 run osmo-hlr_10.42.42.2(pid=21017): Launched 19:09:59.287843 run osmo-stp_10.42.42.5: Starting osmo-stp 19:09:59.860164 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21019): Launched 19:10:00.190354 run osmo-stp_10.42.42.5(pid=21020): Launched 19:10:00.309241 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:10:00.903179 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21022): Launched 19:10:01.025468 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:10:01.330672 run patchelf(pid=21023): Launched 19:10:01.541963 run osmo-stp_10.42.42.5(pid=21020): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21020)] 19:10:01.685962 run osmo-stp_10.42.42.5(pid=21020): stdout: | (launched: 2022-12-13_19:10:00.027606) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:10:01.830335 run osmo-stp_10.42.42.5(pid=21020): stderr: | �[0;m�[38;5;43m20221213191000243 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213191000243 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213191000243 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213191000244 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213191000244 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213191000244 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213191000244 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:10:02.023474 run osmo-stp_10.42.42.5(pid=21020): stdout: | (launched: 2022-12-13_19:10:00.027606) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:10:02.164194 run osmo-stp_10.42.42.5(pid=21020): stderr: | �[0;m�[38;5;43m20221213191000243 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213191000243 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213191000243 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213191000244 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213191000244 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213191000244 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213191000244 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:10:02.323773 run patchelf(pid=21023): Terminating (SIGINT) 19:10:02.507879 run patchelf(pid=21023): Terminated: ok {rc=0} 19:10:02.541803 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21020): Process ended prematurely: osmo-stp_10.42.42.5(pid=21020) [trial-2393↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21020)] [trial-2393↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38] 19:10:02.551855 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 19:10:02.615944 run osmo-hlr_10.42.42.2(pid=21017): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21017)] 19:10:02.668408 run osmo-hlr_10.42.42.2(pid=21017): stdout: | (launched: 2022-12-13_19:09:59.000134) 19:10:02.721194 run osmo-hlr_10.42.42.2(pid=21017): stderr: | �[0;m�[1;31m20221213190959199 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213190959199 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213190959199 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213190959199 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213190959199 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213190959199 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213190959212 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:trx-sysmocell5000/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213190959221 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213190959221 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213190959221 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:10:02.766295 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21010): Terminating (SIGTERM) 19:10:02.808655 run iperf3-srv_10.42.42.10(pid=21011): Terminating (SIGTERM) 19:10:02.851109 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21012): Terminating (SIGTERM) 19:10:02.893363 run iperf3-srv_10.42.42.10(pid=21013): Terminating (SIGTERM) 19:10:02.935728 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21016): Terminating (SIGTERM) 19:10:02.978370 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21019): Terminating (SIGTERM) 19:10:03.021030 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21022): Terminating (SIGTERM) 19:10:03.030705 --- ParallelTerminationStrategy: PID 21010 died... 19:10:03.087628 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21010): Terminated: ok {rc=0} 19:10:03.097752 --- ParallelTerminationStrategy: PID 21011 died... 19:10:03.153875 run iperf3-srv_10.42.42.10(pid=21011): Terminated {rc=256} 19:10:03.163803 --- ParallelTerminationStrategy: PID 21012 died... 19:10:03.220012 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21012): Terminated: ok {rc=0} 19:10:03.230026 --- ParallelTerminationStrategy: PID 21013 died... 19:10:03.286136 run iperf3-srv_10.42.42.10(pid=21013): Terminated {rc=256} 19:10:03.296079 --- ParallelTerminationStrategy: PID 21016 died... 19:10:03.352309 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21016): Terminated: ok {rc=0} 19:10:03.362347 --- ParallelTerminationStrategy: PID 21019 died... 19:10:03.418408 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21019): Terminated: ok {rc=0} 19:10:03.428424 --- ParallelTerminationStrategy: PID 21022 died... 19:10:03.484711 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21022): Terminated: ok {rc=0} 19:10:03.573041 bus /gobi_0: Setting Powered False 19:10:04.678175 bus /gobi_0: Setting Powered False 19:10:05.787421 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21020): Process ended prematurely: osmo-stp_10.42.42.5(pid=21020) [trial-2393↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21020)]