Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=21735): Process ended prematurely: osmo-stp_10.42.42.5(pid=21735) [trial-2393↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21735)]
Standard Output
---------------------------------------------- trial-2393 gprs:trx-umtrx+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 19:20:08.926743 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:20:08.938359 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 19:20:09.106192 tst cs_paging_gprs_active.py: using LAC 35717 19:20:09.231154 tst cs_paging_gprs_active.py: using RAC 17 19:20:09.354406 tst cs_paging_gprs_active.py: using CellId 35717 19:20:09.484062 tst cs_paging_gprs_active.py: using BVCI 35718 19:20:09.509834 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:20:09.521497 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:20:09.533084 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:20:09.544542 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:20:09.556822 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:20:09.569426 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:20:09.581891 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:20:09.594057 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:20:09.606317 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 19:20:09.727029 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 19:20:10.029297 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:20:10.168034 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:20:10.511072 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21725): Launched 19:20:10.795445 run iperf3-srv_10.42.42.10(pid=21726): Launched 19:20:10.999753 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:20:11.138834 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:20:11.480885 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21727): Launched 19:20:11.763721 run iperf3-srv_10.42.42.10(pid=21728): Launched 19:20:11.966432 tst cs_paging_gprs_active.py:38: start network... 19:20:12.104519 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:20:12.625818 run create_hlr_db(pid=21729): Launched 19:20:12.816335 bus /gobi_6: Setting Powered False 19:20:13.837721 run create_hlr_db(pid=21729): Terminated: ok {rc=0} 19:20:14.250687 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21731): Launched 19:20:14.559076 run osmo-hlr_10.42.42.2(pid=21732): Launched 19:20:14.672474 run osmo-stp_10.42.42.5: Starting osmo-stp 19:20:15.204498 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21734): Launched 19:20:15.511495 run osmo-stp_10.42.42.5(pid=21735): Launched 19:20:15.623175 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:20:16.193616 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21737): Launched 19:20:16.305741 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:20:16.604645 run patchelf(pid=21738): Launched 19:20:16.789086 run osmo-stp_10.42.42.5(pid=21735): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21735)] 19:20:16.923945 run osmo-stp_10.42.42.5(pid=21735): stdout: | (launched: 2022-12-13_19:20:15.359987) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:20:17.059008 run osmo-stp_10.42.42.5(pid=21735): stderr: | �[0;m�[38;5;43m20221213192015529 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213192015529 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213192015529 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213192015530 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213192015530 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213192015530 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213192015530 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:20:17.188657 run osmo-stp_10.42.42.5(pid=21735): stdout: | (launched: 2022-12-13_19:20:15.359987) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:20:17.316372 run osmo-stp_10.42.42.5(pid=21735): stderr: | �[0;m�[38;5;43m20221213192015529 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213192015529 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213192015529 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213192015530 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213192015530 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213192015530 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213192015530 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:20:17.464046 run patchelf(pid=21738): Terminating (SIGINT) 19:20:17.638338 run patchelf(pid=21738): Terminated: ok {rc=0} 19:20:17.670573 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21735): Process ended prematurely: osmo-stp_10.42.42.5(pid=21735) [trial-2393↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21735)] [trial-2393↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 19:20:17.680046 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 19:20:17.741581 run osmo-hlr_10.42.42.2(pid=21732): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21732)] 19:20:17.791461 run osmo-hlr_10.42.42.2(pid=21732): stdout: | (launched: 2022-12-13_19:20:14.407195) 19:20:17.841961 run osmo-hlr_10.42.42.2(pid=21732): stderr: | �[0;m�[1;31m20221213192014580 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213192014580 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213192014580 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213192014580 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213192014580 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213192014580 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213192014597 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:trx-umtrx+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213192014607 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213192014608 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213192014608 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:20:17.885020 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21725): Terminating (SIGTERM) 19:20:17.925491 run iperf3-srv_10.42.42.10(pid=21726): Terminating (SIGTERM) 19:20:17.965947 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21727): Terminating (SIGTERM) 19:20:18.006274 run iperf3-srv_10.42.42.10(pid=21728): Terminating (SIGTERM) 19:20:18.046628 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21731): Terminating (SIGTERM) 19:20:18.087184 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21734): Terminating (SIGTERM) 19:20:18.127645 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21737): Terminating (SIGTERM) 19:20:18.137161 --- ParallelTerminationStrategy: PID 21725 died... 19:20:18.191441 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21725): Terminated: ok {rc=0} 19:20:18.201455 --- ParallelTerminationStrategy: PID 21726 died... 19:20:18.255396 run iperf3-srv_10.42.42.10(pid=21726): Terminated {rc=256} 19:20:18.265305 --- ParallelTerminationStrategy: PID 21727 died... 19:20:18.319451 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21727): Terminated: ok {rc=0} 19:20:18.329470 --- ParallelTerminationStrategy: PID 21728 died... 19:20:18.383289 run iperf3-srv_10.42.42.10(pid=21728): Terminated {rc=256} 19:20:18.393133 --- ParallelTerminationStrategy: PID 21731 died... 19:20:18.447518 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21731): Terminated: ok {rc=0} 19:20:18.457577 --- ParallelTerminationStrategy: PID 21734 died... 19:20:18.511549 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21734): Terminated: ok {rc=0} 19:20:18.521525 --- ParallelTerminationStrategy: PID 21737 died... 19:20:18.575435 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21737): Terminated: ok {rc=0} 19:20:18.659606 bus /gobi_0: Setting Powered False 19:20:19.767621 bus /gobi_0: Setting Powered False 19:20:20.879861 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21735): Process ended prematurely: osmo-stp_10.42.42.5(pid=21735) [trial-2393↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21735)]