Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=12226): Process ended prematurely: osmo-stp_10.42.42.5(pid=12226) [trial-2396↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12226)]
Standard Output
---------------------------------------------- trial-2396 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 23:18:41.161958 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:41.173255 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 23:18:41.300371 tst cs_paging_gprs_active.py: using LAC 36916 23:18:41.424574 tst cs_paging_gprs_active.py: using RAC 196 23:18:41.548161 tst cs_paging_gprs_active.py: using CellId 36916 23:18:41.672126 tst cs_paging_gprs_active.py: using BVCI 36917 23:18:41.696005 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:41.707126 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:41.717826 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:41.728537 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:41.739645 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:41.750456 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:41.761524 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:41.772189 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:41.783157 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 23:18:41.906323 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 23:18:42.191847 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:18:42.322256 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:18:42.646347 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12216): Launched 23:18:42.916433 run iperf3-srv_10.42.42.10(pid=12217): Launched 23:18:43.106888 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:18:43.237214 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:18:43.560070 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12218): Launched 23:18:43.828040 run iperf3-srv_10.42.42.10(pid=12219): Launched 23:18:44.017884 tst cs_paging_gprs_active.py:38: start network... 23:18:44.147315 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:18:44.644634 run create_hlr_db(pid=12220): Launched 23:18:44.822882 bus /gobi_6: Setting Powered False 23:18:45.852398 run create_hlr_db(pid=12220): Terminated: ok {rc=0} 23:18:46.404221 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12222): Launched 23:18:46.787429 run osmo-hlr_10.42.42.2(pid=12223): Launched 23:18:46.957523 run osmo-stp_10.42.42.5: Starting osmo-stp 23:18:47.630185 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12225): Launched 23:18:47.964172 run osmo-stp_10.42.42.5(pid=12226): Launched 23:18:48.085742 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:18:48.666102 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12228): Launched 23:18:48.784904 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:18:49.075642 run patchelf(pid=12229): Launched 23:18:49.269287 run osmo-stp_10.42.42.5(pid=12226): ERR: Terminated: ERROR {rc=1} [trial-2396↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12226)] 23:18:49.411605 run osmo-stp_10.42.42.5(pid=12226): stdout: | (launched: 2022-12-13_23:18:47.799317) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:18:49.554600 run osmo-stp_10.42.42.5(pid=12226): stderr: | �[0;m�[38;5;43m20221213231847996 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213231847997 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213231847997 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213231847997 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213231847998 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213231847998 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213231847998 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:18:49.692806 run osmo-stp_10.42.42.5(pid=12226): stdout: | (launched: 2022-12-13_23:18:47.799317) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:18:49.829376 run osmo-stp_10.42.42.5(pid=12226): stderr: | �[0;m�[38;5;43m20221213231847996 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213231847997 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213231847997 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213231847997 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213231847998 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213231847998 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213231847998 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:18:49.988005 run patchelf(pid=12229): Terminating (SIGINT) 23:18:50.174198 run patchelf(pid=12229): Terminated: ok {rc=0} 23:18:50.208361 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12226): Process ended prematurely: osmo-stp_10.42.42.5(pid=12226) [trial-2396↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12226)] [trial-2396↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 23:18:50.218663 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 23:18:50.282832 run osmo-hlr_10.42.42.2(pid=12223): ERR: Terminated: ERROR {rc=237} [trial-2396↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12223)] 23:18:50.335090 run osmo-hlr_10.42.42.2(pid=12223): stdout: | (launched: 2022-12-13_23:18:46.580263) 23:18:50.387808 run osmo-hlr_10.42.42.2(pid=12223): stderr: | �[0;m�[1;31m20221213231846948 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213231846948 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213231846949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213231846949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213231846949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213231846953 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213231846976 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213231846994 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213231846994 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213231846994 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:18:50.432852 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12216): Terminating (SIGTERM) 23:18:50.475471 run iperf3-srv_10.42.42.10(pid=12217): Terminating (SIGTERM) 23:18:50.518553 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12218): Terminating (SIGTERM) 23:18:50.560922 run iperf3-srv_10.42.42.10(pid=12219): Terminating (SIGTERM) 23:18:50.603453 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12222): Terminating (SIGTERM) 23:18:50.646044 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12225): Terminating (SIGTERM) 23:18:50.688499 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12228): Terminating (SIGTERM) 23:18:50.698176 --- ParallelTerminationStrategy: PID 12216 died... 23:18:50.754783 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12216): Terminated: ok {rc=0} 23:18:50.764787 --- ParallelTerminationStrategy: PID 12217 died... 23:18:50.820608 run iperf3-srv_10.42.42.10(pid=12217): Terminated {rc=256} 23:18:50.830514 --- ParallelTerminationStrategy: PID 12218 died... 23:18:50.886568 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12218): Terminated: ok {rc=0} 23:18:50.896511 --- ParallelTerminationStrategy: PID 12219 died... 23:18:50.952176 run iperf3-srv_10.42.42.10(pid=12219): Terminated {rc=256} 23:18:50.962099 --- ParallelTerminationStrategy: PID 12222 died... 23:18:51.018085 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12222): Terminated: ok {rc=0} 23:18:51.027978 --- ParallelTerminationStrategy: PID 12225 died... 23:18:51.083825 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12225): Terminated: ok {rc=0} 23:18:51.093915 --- ParallelTerminationStrategy: PID 12228 died... 23:18:51.149693 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12228): Terminated: ok {rc=0} 23:18:51.236935 bus /gobi_0: Setting Powered False 23:18:52.342520 bus /gobi_0: Setting Powered False 23:18:53.454681 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12226): Process ended prematurely: osmo-stp_10.42.42.5(pid=12226) [trial-2396↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12226)]