Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=13787): Process ended prematurely: osmo-stp_10.42.42.5(pid=13787) [trial-2396↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13787)]
Standard Output
---------------------------------------------- trial-2396 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 23:37:01.402991 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:37:01.414516 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 23:37:01.588771 tst cs_paging_gprs_active.py: using LAC 37014 23:37:01.719761 tst cs_paging_gprs_active.py: using RAC 39 23:37:01.854527 tst cs_paging_gprs_active.py: using CellId 37014 23:37:01.977583 tst cs_paging_gprs_active.py: using BVCI 37015 23:37:02.002081 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:37:02.013915 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:37:02.025707 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:37:02.037428 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:37:02.050082 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:37:02.061978 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:37:02.073995 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:37:02.085985 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:37:02.098118 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:37:02.218624 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:37:02.510288 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:37:02.644711 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:37:02.976494 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13777): Launched 23:37:03.252342 run iperf3-srv_10.42.42.10(pid=13778): Launched 23:37:03.448865 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:37:03.583093 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:37:03.913709 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13779): Launched 23:37:04.188524 run iperf3-srv_10.42.42.10(pid=13780): Launched 23:37:04.384546 tst cs_paging_gprs_active.py:38: start network... 23:37:04.518571 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:37:05.021265 run create_hlr_db(pid=13781): Launched 23:37:05.206945 bus /gobi_6: Setting Powered False 23:37:06.217617 run create_hlr_db(pid=13781): Terminated: ok {rc=0} 23:37:06.622877 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13783): Launched 23:37:06.921951 run osmo-hlr_10.42.42.2(pid=13784): Launched 23:37:07.041639 run osmo-stp_10.42.42.5: Starting osmo-stp 23:37:07.565053 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13786): Launched 23:37:07.863123 run osmo-stp_10.42.42.5(pid=13787): Launched 23:37:07.973176 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:37:08.494008 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13789): Launched 23:37:08.601022 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:37:08.861990 run patchelf(pid=13790): Launched 23:37:09.037133 run osmo-stp_10.42.42.5(pid=13787): ERR: Terminated: ERROR {rc=1} [trial-2396↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13787)] 23:37:09.165821 run osmo-stp_10.42.42.5(pid=13787): stdout: | (launched: 2022-12-13_23:37:07.716623) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:37:09.294545 run osmo-stp_10.42.42.5(pid=13787): stderr: | �[0;m�[38;5;43m20221213233707887 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213233707887 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213233707887 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213233707888 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213233707888 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213233707888 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213233707888 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:37:09.418739 run osmo-stp_10.42.42.5(pid=13787): stdout: | (launched: 2022-12-13_23:37:07.716623) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:37:09.541527 run osmo-stp_10.42.42.5(pid=13787): stderr: | �[0;m�[38;5;43m20221213233707887 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213233707887 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213233707887 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213233707888 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213233707888 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213233707888 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213233707888 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:37:09.684928 run patchelf(pid=13790): Terminating (SIGINT) 23:37:09.853291 run patchelf(pid=13790): Terminated: ok {rc=0} 23:37:09.884277 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13787): Process ended prematurely: osmo-stp_10.42.42.5(pid=13787) [trial-2396↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13787)] [trial-2396↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 23:37:09.893448 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 23:37:09.953440 run osmo-hlr_10.42.42.2(pid=13784): ERR: Terminated: ERROR {rc=237} [trial-2396↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13784)] 23:37:10.002421 run osmo-hlr_10.42.42.2(pid=13784): stdout: | (launched: 2022-12-13_23:37:06.775672) 23:37:10.052254 run osmo-hlr_10.42.42.2(pid=13784): stderr: | �[0;m�[1;31m20221213233706950 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213233706950 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213233706950 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213233706950 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213233706950 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213233706950 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213233706962 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213233706971 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213233706971 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213233706971 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:37:10.094876 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13777): Terminating (SIGTERM) 23:37:10.134912 run iperf3-srv_10.42.42.10(pid=13778): Terminating (SIGTERM) 23:37:10.175037 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13779): Terminating (SIGTERM) 23:37:10.214790 run iperf3-srv_10.42.42.10(pid=13780): Terminating (SIGTERM) 23:37:10.254795 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13783): Terminating (SIGTERM) 23:37:10.294693 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13786): Terminating (SIGTERM) 23:37:10.334650 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13789): Terminating (SIGTERM) 23:37:10.343840 --- ParallelTerminationStrategy: PID 13777 died... 23:37:10.397343 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13777): Terminated: ok {rc=0} 23:37:10.406957 --- ParallelTerminationStrategy: PID 13778 died... 23:37:10.459854 run iperf3-srv_10.42.42.10(pid=13778): Terminated {rc=256} 23:37:10.469376 --- ParallelTerminationStrategy: PID 13779 died... 23:37:10.522465 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13779): Terminated: ok {rc=0} 23:37:10.531961 --- ParallelTerminationStrategy: PID 13780 died... 23:37:10.584891 run iperf3-srv_10.42.42.10(pid=13780): Terminated {rc=256} 23:37:10.594316 --- ParallelTerminationStrategy: PID 13783 died... 23:37:10.647207 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13783): Terminated: ok {rc=0} 23:37:10.656798 --- ParallelTerminationStrategy: PID 13786 died... 23:37:10.709580 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13786): Terminated: ok {rc=0} 23:37:10.719003 --- ParallelTerminationStrategy: PID 13789 died... 23:37:10.772022 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13789): Terminated: ok {rc=0} 23:37:10.854903 bus /gobi_0: Setting Powered False 23:37:11.956026 bus /gobi_0: Setting Powered False 23:37:13.068061 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13787): Process ended prematurely: osmo-stp_10.42.42.5(pid=13787) [trial-2396↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13787)]