Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=13580): Process ended prematurely: osmo-stp_10.42.42.5(pid=13580) [trial-2396↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13580)]
Standard Output
---------------------------------------------- trial-2396 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 23:34:03.910603 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:03.921687 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 23:34:04.059763 tst cs_paging_gprs_active.py: using LAC 36999 23:34:04.177613 tst cs_paging_gprs_active.py: using RAC 24 23:34:04.295225 tst cs_paging_gprs_active.py: using CellId 36999 23:34:04.415509 tst cs_paging_gprs_active.py: using BVCI 37000 23:34:04.438493 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:04.448878 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:04.459206 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:04.469541 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:04.480047 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:04.490326 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:04.500600 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:04.510826 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:04.521676 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 23:34:04.641052 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 23:34:04.918895 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:34:05.043638 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:34:05.353244 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13570): Launched 23:34:05.609217 run iperf3-srv_10.42.42.10(pid=13571): Launched 23:34:05.791375 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:34:05.915605 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:34:06.224278 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13572): Launched 23:34:06.479860 run iperf3-srv_10.42.42.10(pid=13573): Launched 23:34:06.660895 tst cs_paging_gprs_active.py:38: start network... 23:34:06.785082 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:34:07.260303 run create_hlr_db(pid=13574): Launched 23:34:07.432737 bus /sierra_2: Setting Powered False 23:34:08.454389 run create_hlr_db(pid=13574): Terminated: ok {rc=0} 23:34:08.876544 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13576): Launched 23:34:09.195438 run osmo-hlr_10.42.42.2(pid=13577): Launched 23:34:09.312770 run osmo-stp_10.42.42.5: Starting osmo-stp 23:34:09.863212 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13579): Launched 23:34:10.182229 run osmo-stp_10.42.42.5(pid=13580): Launched 23:34:10.299276 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:34:10.856215 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13582): Launched 23:34:10.971796 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:34:11.249404 run patchelf(pid=13583): Launched 23:34:11.436721 run osmo-stp_10.42.42.5(pid=13580): ERR: Terminated: ERROR {rc=1} [trial-2396↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13580)] 23:34:11.574087 run osmo-stp_10.42.42.5(pid=13580): stdout: | (launched: 2022-12-13_23:34:10.025995) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:34:11.711696 run osmo-stp_10.42.42.5(pid=13580): stderr: | �[0;m�[38;5;43m20221213233410217 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213233410218 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213233410218 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213233410218 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213233410219 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213233410219 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213233410219 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:34:11.844152 run osmo-stp_10.42.42.5(pid=13580): stdout: | (launched: 2022-12-13_23:34:10.025995) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:34:11.976469 run osmo-stp_10.42.42.5(pid=13580): stderr: | �[0;m�[38;5;43m20221213233410217 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213233410218 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213233410218 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213233410218 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213233410219 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213233410219 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213233410219 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:34:12.129755 run patchelf(pid=13583): Terminating (SIGINT) 23:34:12.309138 run patchelf(pid=13583): Terminated: ok {rc=0} 23:34:12.342569 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13580): Process ended prematurely: osmo-stp_10.42.42.5(pid=13580) [trial-2396↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13580)] [trial-2396↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 23:34:12.352516 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 23:34:12.415822 run osmo-hlr_10.42.42.2(pid=13577): ERR: Terminated: ERROR {rc=237} [trial-2396↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13577)] 23:34:12.467424 run osmo-hlr_10.42.42.2(pid=13577): stdout: | (launched: 2022-12-13_23:34:09.039867) 23:34:12.519790 run osmo-hlr_10.42.42.2(pid=13577): stderr: | �[0;m�[1;31m20221213233409239 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213233409239 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213233409239 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213233409239 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213233409239 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213233409239 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213233409252 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213233409262 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213233409263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213233409263 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:34:12.564211 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13570): Terminating (SIGTERM) 23:34:12.606585 run iperf3-srv_10.42.42.10(pid=13571): Terminating (SIGTERM) 23:34:12.648777 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13572): Terminating (SIGTERM) 23:34:12.690595 run iperf3-srv_10.42.42.10(pid=13573): Terminating (SIGTERM) 23:34:12.732482 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13576): Terminating (SIGTERM) 23:34:12.774294 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13579): Terminating (SIGTERM) 23:34:12.816440 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13582): Terminating (SIGTERM) 23:34:12.826246 --- ParallelTerminationStrategy: PID 13570 died... 23:34:12.882598 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13570): Terminated: ok {rc=0} 23:34:12.892683 --- ParallelTerminationStrategy: PID 13571 died... 23:34:12.949215 run iperf3-srv_10.42.42.10(pid=13571): Terminated {rc=256} 23:34:12.959215 --- ParallelTerminationStrategy: PID 13572 died... 23:34:13.014936 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13572): Terminated: ok {rc=0} 23:34:13.024871 --- ParallelTerminationStrategy: PID 13573 died... 23:34:13.080413 run iperf3-srv_10.42.42.10(pid=13573): Terminated {rc=256} 23:34:13.090341 --- ParallelTerminationStrategy: PID 13576 died... 23:34:13.146105 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13576): Terminated: ok {rc=0} 23:34:13.155919 --- ParallelTerminationStrategy: PID 13579 died... 23:34:13.211617 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13579): Terminated: ok {rc=0} 23:34:13.221829 --- ParallelTerminationStrategy: PID 13582 died... 23:34:13.277925 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13582): Terminated: ok {rc=0} 23:34:13.365667 bus /gobi_0: Setting Powered False 23:34:14.469184 bus /gobi_0: Setting Powered False 23:34:15.579950 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13580): Process ended prematurely: osmo-stp_10.42.42.5(pid=13580) [trial-2396↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13580)]