Failed
gprs:trx-lms+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=16118): Process ended prematurely: osmo-stp_10.42.42.5(pid=16118) [trial-2396↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16118)]
Standard Output
---------------------------------------------- trial-2396 gprs:trx-lms+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 00:01:47.692726 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:01:47.704155 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 00:01:47.869020 tst cs_paging_gprs_active.py: using LAC 37147 00:01:47.992539 tst cs_paging_gprs_active.py: using RAC 172 00:01:48.116034 tst cs_paging_gprs_active.py: using CellId 37147 00:01:48.239686 tst cs_paging_gprs_active.py: using BVCI 37148 00:01:48.264199 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:01:48.275460 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:01:48.286575 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:01:48.297693 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:01:48.309917 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:01:48.321834 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:01:48.333923 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:01:48.345815 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:01:48.357921 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:01:48.477086 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:01:48.766386 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:01:48.900371 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:01:49.229498 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16108): Launched 00:01:49.502855 run iperf3-srv_10.42.42.10(pid=16109): Launched 00:01:49.698958 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:01:49.833382 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:01:50.163107 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16110): Launched 00:01:50.436074 run iperf3-srv_10.42.42.10(pid=16111): Launched 00:01:50.631130 tst cs_paging_gprs_active.py:38: start network... 00:01:50.764891 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:01:51.264739 run create_hlr_db(pid=16112): Launched 00:01:51.448457 bus /gobi_6: Setting Powered False 00:01:52.471086 run create_hlr_db(pid=16112): Terminated: ok {rc=0} 00:01:52.893711 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16114): Launched 00:01:53.213146 run osmo-hlr_10.42.42.2(pid=16115): Launched 00:01:53.329357 run osmo-stp_10.42.42.5: Starting osmo-stp 00:01:53.880252 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16117): Launched 00:01:54.198287 run osmo-stp_10.42.42.5(pid=16118): Launched 00:01:54.314696 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:01:54.869652 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16120): Launched 00:01:54.983419 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:01:55.267080 run patchelf(pid=16121): Launched 00:01:55.453748 run osmo-stp_10.42.42.5(pid=16118): ERR: Terminated: ERROR {rc=1} [trial-2396↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16118)] 00:01:55.590068 run osmo-stp_10.42.42.5(pid=16118): stdout: | (launched: 2022-12-14_00:01:54.042039) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:01:55.726749 run osmo-stp_10.42.42.5(pid=16118): stderr: | �[0;m�[38;5;43m20221214000154231 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214000154232 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214000154232 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214000154232 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214000154235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214000154235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214000154235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:01:55.858911 run osmo-stp_10.42.42.5(pid=16118): stdout: | (launched: 2022-12-14_00:01:54.042039) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:01:55.989678 run osmo-stp_10.42.42.5(pid=16118): stderr: | �[0;m�[38;5;43m20221214000154231 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214000154232 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214000154232 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214000154232 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214000154235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214000154235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214000154235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:01:56.142033 run patchelf(pid=16121): Terminating (SIGINT) 00:01:56.320421 run patchelf(pid=16121): Terminated: ok {rc=0} 00:01:56.353361 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=16118): Process ended prematurely: osmo-stp_10.42.42.5(pid=16118) [trial-2396↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16118)] [trial-2396↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 00:01:56.363176 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 00:01:56.426175 run osmo-hlr_10.42.42.2(pid=16115): ERR: Terminated: ERROR {rc=237} [trial-2396↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16115)] 00:01:56.477330 run osmo-hlr_10.42.42.2(pid=16115): stdout: | (launched: 2022-12-14_00:01:53.055898) 00:01:56.529098 run osmo-hlr_10.42.42.2(pid=16115): stderr: | �[0;m�[1;31m20221214000153254 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214000153254 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214000153254 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214000153254 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214000153254 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214000153254 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214000153267 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:trx-lms+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214000153275 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214000153275 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214000153275 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:01:56.573387 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16108): Terminating (SIGTERM) 00:01:56.615198 run iperf3-srv_10.42.42.10(pid=16109): Terminating (SIGTERM) 00:01:56.656902 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16110): Terminating (SIGTERM) 00:01:56.698423 run iperf3-srv_10.42.42.10(pid=16111): Terminating (SIGTERM) 00:01:56.739974 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16114): Terminating (SIGTERM) 00:01:56.782008 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16117): Terminating (SIGTERM) 00:01:56.823683 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16120): Terminating (SIGTERM) 00:01:56.833309 --- ParallelTerminationStrategy: PID 16108 died... 00:01:56.889361 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16108): Terminated: ok {rc=0} 00:01:56.899333 --- ParallelTerminationStrategy: PID 16109 died... 00:01:56.954777 run iperf3-srv_10.42.42.10(pid=16109): Terminated {rc=256} 00:01:56.964678 --- ParallelTerminationStrategy: PID 16110 died... 00:01:57.020604 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16110): Terminated: ok {rc=0} 00:01:57.030596 --- ParallelTerminationStrategy: PID 16111 died... 00:01:57.086083 run iperf3-srv_10.42.42.10(pid=16111): Terminated {rc=256} 00:01:57.096056 --- ParallelTerminationStrategy: PID 16114 died... 00:01:57.151575 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16114): Terminated: ok {rc=0} 00:01:57.161912 --- ParallelTerminationStrategy: PID 16117 died... 00:01:57.217572 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16117): Terminated: ok {rc=0} 00:01:57.227502 --- ParallelTerminationStrategy: PID 16120 died... 00:01:57.283159 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16120): Terminated: ok {rc=0} 00:01:57.370314 bus /gobi_0: Setting Powered False 00:01:58.474657 bus /gobi_0: Setting Powered False 00:01:59.581078 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16118): Process ended prematurely: osmo-stp_10.42.42.5(pid=16118) [trial-2396↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16118)]