Failed
gprs:oc2g.cs_paging_gprs_active.py (from gprs_oc2g)
Stacktrace
osmo-stp_10.42.42.5(pid=21131): Process ended prematurely: osmo-stp_10.42.42.5(pid=21131) [trial-2397↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21131)]
Standard Output
---------------------------------------------- trial-2397 gprs:oc2g cs_paging_gprs_active.py ---------------------------------------------- 00:54:02.681794 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:54:02.697224 tst gprs:oc2g: Using 1 x bts (candidates: 1) 00:54:02.852845 tst cs_paging_gprs_active.py: using LAC 37414 00:54:03.012188 tst cs_paging_gprs_active.py: using RAC 184 00:54:03.168452 tst cs_paging_gprs_active.py: using CellId 37414 00:54:03.324800 tst cs_paging_gprs_active.py: using BVCI 37415 00:54:03.351766 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:54:03.367254 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:54:03.382299 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:54:03.398312 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:54:03.414220 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:54:03.431242 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:54:03.448427 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:54:03.462674 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 00:54:03.475910 tst gprs:oc2g: Using 1 x modem (candidates: 4) 00:54:03.625362 tst gprs:oc2g: Using 1 x modem (candidates: 4) 00:54:03.988382 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:54:04.155104 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:54:04.541634 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21119): Launched 00:54:04.835697 run iperf3-srv_10.42.42.10(pid=21120): Launched 00:54:05.046114 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:54:05.190800 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:54:05.560567 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21121): Launched 00:54:05.868301 run iperf3-srv_10.42.42.10(pid=21122): Launched 00:54:06.078071 tst cs_paging_gprs_active.py:38: start network... 00:54:06.221289 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:54:06.782711 run create_hlr_db(pid=21124): Launched 00:54:06.963634 bus /sierra_2: Setting Powered False 00:54:07.986176 run create_hlr_db(pid=21124): Terminated: ok {rc=0} 00:54:08.419986 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21127): Launched 00:54:08.832823 run osmo-hlr_10.42.42.2(pid=21128): Launched 00:54:09.067033 run osmo-stp_10.42.42.5: Starting osmo-stp 00:54:09.706134 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21130): Launched 00:54:10.115919 run osmo-stp_10.42.42.5(pid=21131): Launched 00:54:10.362245 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:54:10.966514 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21133): Launched 00:54:11.080869 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:54:11.374048 run patchelf(pid=21134): Launched 00:54:11.562560 run osmo-stp_10.42.42.5(pid=21131): ERR: Terminated: ERROR {rc=1} [trial-2397↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21131)] 00:54:11.700330 run osmo-stp_10.42.42.5(pid=21131): stdout: | (launched: 2022-12-14_00:54:09.866015) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:54:11.838512 run osmo-stp_10.42.42.5(pid=21131): stderr: | �[0;m�[38;5;43m20221214005410187 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214005410188 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214005410188 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214005410188 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214005410189 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214005410189 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214005410189 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:54:11.972205 run osmo-stp_10.42.42.5(pid=21131): stdout: | (launched: 2022-12-14_00:54:09.866015) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:54:12.103504 run osmo-stp_10.42.42.5(pid=21131): stderr: | �[0;m�[38;5;43m20221214005410187 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214005410188 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214005410188 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214005410188 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214005410189 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214005410189 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214005410189 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:54:12.256770 run patchelf(pid=21134): Terminating (SIGINT) 00:54:12.437462 run patchelf(pid=21134): Terminated: ok {rc=0} 00:54:12.471845 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21131): Process ended prematurely: osmo-stp_10.42.42.5(pid=21131) [trial-2397↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21131)] [trial-2397↪gprs:oc2g↪cs_paging_gprs_active.py:38] 00:54:12.482127 tst cs_paging_gprs_active.py:38: Test FAILED (9.9 sec) 00:54:12.546034 run osmo-hlr_10.42.42.2(pid=21128): ERR: Terminated: ERROR {rc=237} [trial-2397↪gprs:oc2g↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21128)] 00:54:12.598000 run osmo-hlr_10.42.42.2(pid=21128): stdout: | (launched: 2022-12-14_00:54:08.580290) 00:54:12.650340 run osmo-hlr_10.42.42.2(pid=21128): stderr: | �[0;m�[1;31m20221214005408910 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214005408910 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214005408910 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214005408910 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214005408910 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214005408910 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214005408933 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:oc2g/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214005408947 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214005408947 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214005408947 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:54:12.696732 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21119): Terminating (SIGTERM) 00:54:12.741097 run iperf3-srv_10.42.42.10(pid=21120): Terminating (SIGTERM) 00:54:12.785055 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21121): Terminating (SIGTERM) 00:54:12.828594 run iperf3-srv_10.42.42.10(pid=21122): Terminating (SIGTERM) 00:54:12.873828 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21127): Terminating (SIGTERM) 00:54:12.917608 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21130): Terminating (SIGTERM) 00:54:12.960413 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21133): Terminating (SIGTERM) 00:54:12.972120 --- ParallelTerminationStrategy: PID 21119 died... 00:54:13.029216 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21119): Terminated: ok {rc=0} 00:54:13.039761 --- ParallelTerminationStrategy: PID 21120 died... 00:54:13.095913 run iperf3-srv_10.42.42.10(pid=21120): Terminated {rc=256} 00:54:13.106599 --- ParallelTerminationStrategy: PID 21121 died... 00:54:13.162827 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21121): Terminated: ok {rc=0} 00:54:13.173814 --- ParallelTerminationStrategy: PID 21122 died... 00:54:13.228678 run iperf3-srv_10.42.42.10(pid=21122): Terminated {rc=256} 00:54:13.238793 --- ParallelTerminationStrategy: PID 21127 died... 00:54:13.294795 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21127): Terminated: ok {rc=0} 00:54:13.305079 --- ParallelTerminationStrategy: PID 21130 died... 00:54:13.360330 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21130): Terminated: ok {rc=0} 00:54:13.370578 --- ParallelTerminationStrategy: PID 21133 died... 00:54:13.425123 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21133): Terminated: ok {rc=0} 00:54:13.512832 bus /gobi_0: Setting Powered False 00:54:14.619510 bus /gobi_0: Setting Powered False 00:54:15.732212 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21131): Process ended prematurely: osmo-stp_10.42.42.5(pid=21131) [trial-2397↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21131)]