Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=20452): Process ended prematurely: osmo-stp_10.42.42.5(pid=20452) [trial-2397↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20452)]
Standard Output
---------------------------------------------- trial-2397 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 00:48:08.559589 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:48:08.570989 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 00:48:08.725423 tst cs_paging_gprs_active.py: using LAC 37382 00:48:08.855315 tst cs_paging_gprs_active.py: using RAC 152 00:48:08.983681 tst cs_paging_gprs_active.py: using CellId 37382 00:48:09.116844 tst cs_paging_gprs_active.py: using BVCI 37383 00:48:09.142708 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:48:09.154127 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:48:09.165342 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:48:09.176568 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:48:09.187893 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:48:09.199414 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:48:09.210985 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:48:09.222364 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:48:09.234011 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:48:09.352381 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:48:09.650357 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:48:09.788065 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:48:10.132421 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20442): Launched 00:48:10.417392 run iperf3-srv_10.42.42.10(pid=20443): Launched 00:48:10.619240 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:48:10.756454 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:48:11.098711 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20444): Launched 00:48:11.383973 run iperf3-srv_10.42.42.10(pid=20445): Launched 00:48:11.585300 tst cs_paging_gprs_active.py:38: start network... 00:48:11.722342 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:48:12.240854 run create_hlr_db(pid=20446): Launched 00:48:12.431014 bus /gobi_6: Setting Powered False 00:48:13.441608 run create_hlr_db(pid=20446): Terminated: ok {rc=0} 00:48:13.892915 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20448): Launched 00:48:14.226663 run osmo-hlr_10.42.42.2(pid=20449): Launched 00:48:14.350941 run osmo-stp_10.42.42.5: Starting osmo-stp 00:48:14.928415 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20451): Launched 00:48:15.261076 run osmo-stp_10.42.42.5(pid=20452): Launched 00:48:15.380571 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:48:15.991389 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20454): Launched 00:48:16.105127 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:48:16.386029 run patchelf(pid=20455): Launched 00:48:16.572737 run osmo-stp_10.42.42.5(pid=20452): ERR: Terminated: ERROR {rc=1} [trial-2397↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20452)] 00:48:16.711947 run osmo-stp_10.42.42.5(pid=20452): stdout: | (launched: 2022-12-14_00:48:15.095573) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:48:16.850109 run osmo-stp_10.42.42.5(pid=20452): stderr: | �[0;m�[38;5;43m20221214004815288 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214004815288 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214004815288 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214004815289 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214004815289 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214004815289 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214004815289 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:48:16.981611 run osmo-stp_10.42.42.5(pid=20452): stdout: | (launched: 2022-12-14_00:48:15.095573) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:48:17.112633 run osmo-stp_10.42.42.5(pid=20452): stderr: | �[0;m�[38;5;43m20221214004815288 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214004815288 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214004815288 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214004815289 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214004815289 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214004815289 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214004815289 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:48:17.262873 run patchelf(pid=20455): Terminating (SIGINT) 00:48:17.435433 run patchelf(pid=20455): Terminated: ok {rc=0} 00:48:17.466924 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20452): Process ended prematurely: osmo-stp_10.42.42.5(pid=20452) [trial-2397↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20452)] [trial-2397↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 00:48:17.476242 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 00:48:17.536842 run osmo-hlr_10.42.42.2(pid=20449): ERR: Terminated: ERROR {rc=237} [trial-2397↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20449)] 00:48:17.586080 run osmo-hlr_10.42.42.2(pid=20449): stdout: | (launched: 2022-12-14_00:48:14.060547) 00:48:17.635749 run osmo-hlr_10.42.42.2(pid=20449): stderr: | �[0;m�[1;31m20221214004814258 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214004814258 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214004814258 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214004814258 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214004814258 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214004814258 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214004814273 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214004814282 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214004814282 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214004814282 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:48:17.677992 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20442): Terminating (SIGTERM) 00:48:17.717665 run iperf3-srv_10.42.42.10(pid=20443): Terminating (SIGTERM) 00:48:17.757381 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20444): Terminating (SIGTERM) 00:48:17.797110 run iperf3-srv_10.42.42.10(pid=20445): Terminating (SIGTERM) 00:48:17.837113 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20448): Terminating (SIGTERM) 00:48:17.876900 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20451): Terminating (SIGTERM) 00:48:17.916613 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20454): Terminating (SIGTERM) 00:48:17.925720 --- ParallelTerminationStrategy: PID 20442 died... 00:48:17.979560 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20442): Terminated: ok {rc=0} 00:48:17.989076 --- ParallelTerminationStrategy: PID 20443 died... 00:48:18.042366 run iperf3-srv_10.42.42.10(pid=20443): Terminated {rc=256} 00:48:18.051735 --- ParallelTerminationStrategy: PID 20444 died... 00:48:18.104935 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20444): Terminated: ok {rc=0} 00:48:18.114326 --- ParallelTerminationStrategy: PID 20445 died... 00:48:18.167593 run iperf3-srv_10.42.42.10(pid=20445): Terminated {rc=256} 00:48:18.177171 --- ParallelTerminationStrategy: PID 20448 died... 00:48:18.230552 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20448): Terminated: ok {rc=0} 00:48:18.239974 --- ParallelTerminationStrategy: PID 20451 died... 00:48:18.293290 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20451): Terminated: ok {rc=0} 00:48:18.302719 --- ParallelTerminationStrategy: PID 20454 died... 00:48:18.356044 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20454): Terminated: ok {rc=0} 00:48:18.444816 bus /gobi_0: Setting Powered False 00:48:19.546731 bus /gobi_0: Setting Powered False 00:48:20.656372 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20452): Process ended prematurely: osmo-stp_10.42.42.5(pid=20452) [trial-2397↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20452)]