Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=20383): Process ended prematurely: osmo-stp_10.42.42.5(pid=20383) [trial-2397↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20383)]
Standard Output
---------------------------------------------- trial-2397 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 00:47:08.283941 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:08.294775 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 00:47:08.427225 tst cs_paging_gprs_active.py: using LAC 37377 00:47:08.558142 tst cs_paging_gprs_active.py: using RAC 147 00:47:08.684371 tst cs_paging_gprs_active.py: using CellId 37377 00:47:08.811601 tst cs_paging_gprs_active.py: using BVCI 37378 00:47:08.836521 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:08.847843 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:08.858878 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:08.870008 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:08.881289 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:08.892497 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:08.903967 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:08.915242 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:08.926734 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:47:09.044093 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:47:09.323616 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:47:09.450460 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:47:09.768327 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20373): Launched 00:47:10.032678 run iperf3-srv_10.42.42.10(pid=20374): Launched 00:47:10.219425 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:47:10.345630 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:47:10.662607 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20375): Launched 00:47:10.925824 run iperf3-srv_10.42.42.10(pid=20376): Launched 00:47:11.110792 tst cs_paging_gprs_active.py:38: start network... 00:47:11.237216 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:47:11.726322 run create_hlr_db(pid=20377): Launched 00:47:11.900934 bus /gobi_6: Setting Powered False 00:47:12.921833 run create_hlr_db(pid=20377): Terminated: ok {rc=0} 00:47:13.356566 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20379): Launched 00:47:13.685560 run osmo-hlr_10.42.42.2(pid=20380): Launched 00:47:13.810887 run osmo-stp_10.42.42.5: Starting osmo-stp 00:47:14.380510 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20382): Launched 00:47:14.710311 run osmo-stp_10.42.42.5(pid=20383): Launched 00:47:14.830352 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:47:15.402939 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20385): Launched 00:47:15.519366 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:47:15.806878 run patchelf(pid=20386): Launched 00:47:16.013867 run osmo-stp_10.42.42.5(pid=20383): ERR: Terminated: ERROR {rc=1} [trial-2397↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20383)] 00:47:16.156889 run osmo-stp_10.42.42.5(pid=20383): stdout: | (launched: 2022-12-14_00:47:14.545949) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:47:16.299830 run osmo-stp_10.42.42.5(pid=20383): stderr: | �[0;m�[38;5;43m20221214004714736 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214004714736 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214004714736 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214004714737 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214004714738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214004714738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214004714738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:47:16.438101 run osmo-stp_10.42.42.5(pid=20383): stdout: | (launched: 2022-12-14_00:47:14.545949) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:47:16.575078 run osmo-stp_10.42.42.5(pid=20383): stderr: | �[0;m�[38;5;43m20221214004714736 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214004714736 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214004714736 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214004714737 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214004714738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214004714738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214004714738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:47:16.735255 run patchelf(pid=20386): Terminating (SIGINT) 00:47:16.921948 run patchelf(pid=20386): Terminated: ok {rc=0} 00:47:16.956873 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20383): Process ended prematurely: osmo-stp_10.42.42.5(pid=20383) [trial-2397↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20383)] [trial-2397↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 00:47:16.968088 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 00:47:17.035506 run osmo-hlr_10.42.42.2(pid=20380): ERR: Terminated: ERROR {rc=237} [trial-2397↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20380)] 00:47:17.089250 run osmo-hlr_10.42.42.2(pid=20380): stdout: | (launched: 2022-12-14_00:47:13.521992) 00:47:17.143944 run osmo-hlr_10.42.42.2(pid=20380): stderr: | �[0;m�[1;31m20221214004713716 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214004713716 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214004713716 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214004713716 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214004713716 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214004713716 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214004713729 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214004713737 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214004713737 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214004713737 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:47:17.190892 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20373): Terminating (SIGTERM) 00:47:17.236582 run iperf3-srv_10.42.42.10(pid=20374): Terminating (SIGTERM) 00:47:17.282421 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20375): Terminating (SIGTERM) 00:47:17.327681 run iperf3-srv_10.42.42.10(pid=20376): Terminating (SIGTERM) 00:47:17.370373 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20379): Terminating (SIGTERM) 00:47:17.412907 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20382): Terminating (SIGTERM) 00:47:17.454964 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20385): Terminating (SIGTERM) 00:47:17.464524 --- ParallelTerminationStrategy: PID 20373 died... 00:47:17.521401 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20373): Terminated: ok {rc=0} 00:47:17.531328 --- ParallelTerminationStrategy: PID 20374 died... 00:47:17.587288 run iperf3-srv_10.42.42.10(pid=20374): Terminated {rc=256} 00:47:17.597227 --- ParallelTerminationStrategy: PID 20375 died... 00:47:17.653279 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20375): Terminated: ok {rc=0} 00:47:17.663572 --- ParallelTerminationStrategy: PID 20376 died... 00:47:17.719499 run iperf3-srv_10.42.42.10(pid=20376): Terminated {rc=256} 00:47:17.729442 --- ParallelTerminationStrategy: PID 20379 died... 00:47:17.785187 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20379): Terminated: ok {rc=0} 00:47:17.795091 --- ParallelTerminationStrategy: PID 20382 died... 00:47:17.851110 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20382): Terminated: ok {rc=0} 00:47:17.861270 --- ParallelTerminationStrategy: PID 20385 died... 00:47:17.917337 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20385): Terminated: ok {rc=0} 00:47:18.004696 bus /gobi_0: Setting Powered False 00:47:19.110377 bus /gobi_0: Setting Powered False 00:47:20.218872 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20383): Process ended prematurely: osmo-stp_10.42.42.5(pid=20383) [trial-2397↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20383)]