Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=25118): Process ended prematurely: osmo-stp_10.42.42.5(pid=25118) [trial-2397↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25118)]
Standard Output
---------------------------------------------- trial-2397 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 01:39:37.723191 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:37.734920 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 01:39:37.897633 tst cs_paging_gprs_active.py: using LAC 37655 01:39:38.019543 tst cs_paging_gprs_active.py: using RAC 170 01:39:38.141845 tst cs_paging_gprs_active.py: using CellId 37655 01:39:38.258183 tst cs_paging_gprs_active.py: using BVCI 37656 01:39:38.280850 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:38.292151 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:38.303276 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:38.314266 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:38.325571 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:38.336849 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:38.348282 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:38.359483 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:39:38.371051 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 01:39:38.491866 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 01:39:38.771315 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:39:38.896299 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:39:39.210245 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25108): Launched 01:39:39.471793 run iperf3-srv_10.42.42.10(pid=25109): Launched 01:39:39.655189 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:39:39.779806 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:39:40.093690 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25110): Launched 01:39:40.353306 run iperf3-srv_10.42.42.10(pid=25111): Launched 01:39:40.536698 tst cs_paging_gprs_active.py:38: start network... 01:39:40.661465 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:39:41.145146 run create_hlr_db(pid=25112): Launched 01:39:41.317827 bus /gobi_6: Setting Powered False 01:39:42.339087 run create_hlr_db(pid=25112): Terminated: ok {rc=0} 01:39:42.742060 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25114): Launched 01:39:43.044041 run osmo-hlr_10.42.42.2(pid=25115): Launched 01:39:43.154632 run osmo-stp_10.42.42.5: Starting osmo-stp 01:39:43.676764 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25117): Launched 01:39:43.978511 run osmo-stp_10.42.42.5(pid=25118): Launched 01:39:44.087804 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:39:44.615417 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25120): Launched 01:39:44.722354 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:39:44.994551 run patchelf(pid=25121): Launched 01:39:45.172338 run osmo-stp_10.42.42.5(pid=25118): ERR: Terminated: ERROR {rc=1} [trial-2397↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25118)] 01:39:45.301925 run osmo-stp_10.42.42.5(pid=25118): stdout: | (launched: 2022-12-14_01:39:43.829073) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:39:45.431117 run osmo-stp_10.42.42.5(pid=25118): stderr: | �[0;m�[38;5;43m20221214013943999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214013943999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214013943999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214013943999 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214013944000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214013944000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214013944000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:39:45.555641 run osmo-stp_10.42.42.5(pid=25118): stdout: | (launched: 2022-12-14_01:39:43.829073) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:39:45.679006 run osmo-stp_10.42.42.5(pid=25118): stderr: | �[0;m�[38;5;43m20221214013943999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214013943999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214013943999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214013943999 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214013944000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214013944000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214013944000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:39:45.822871 run patchelf(pid=25121): Terminating (SIGINT) 01:39:45.995258 run patchelf(pid=25121): Terminated: ok {rc=0} 01:39:46.027848 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=25118): Process ended prematurely: osmo-stp_10.42.42.5(pid=25118) [trial-2397↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25118)] [trial-2397↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 01:39:46.038221 tst cs_paging_gprs_active.py:38: Test FAILED (8.3 sec) 01:39:46.099523 run osmo-hlr_10.42.42.2(pid=25115): ERR: Terminated: ERROR {rc=237} [trial-2397↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25115)] 01:39:46.149199 run osmo-hlr_10.42.42.2(pid=25115): stdout: | (launched: 2022-12-14_01:39:42.894835) 01:39:46.199094 run osmo-hlr_10.42.42.2(pid=25115): stderr: | �[0;m�[1;31m20221214013943070 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214013943071 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214013943071 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214013943071 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214013943071 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214013943071 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214013943083 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214013943091 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214013943092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214013943092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:39:46.241459 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25108): Terminating (SIGTERM) 01:39:46.281943 run iperf3-srv_10.42.42.10(pid=25109): Terminating (SIGTERM) 01:39:46.322219 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25110): Terminating (SIGTERM) 01:39:46.363068 run iperf3-srv_10.42.42.10(pid=25111): Terminating (SIGTERM) 01:39:46.406667 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25114): Terminating (SIGTERM) 01:39:46.448886 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25117): Terminating (SIGTERM) 01:39:46.490771 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25120): Terminating (SIGTERM) 01:39:46.501865 --- ParallelTerminationStrategy: PID 25108 died... 01:39:46.555771 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25108): Terminated: ok {rc=0} 01:39:46.565799 --- ParallelTerminationStrategy: PID 25109 died... 01:39:46.619091 run iperf3-srv_10.42.42.10(pid=25109): Terminated {rc=256} 01:39:46.629064 --- ParallelTerminationStrategy: PID 25110 died... 01:39:46.682790 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25110): Terminated: ok {rc=0} 01:39:46.693243 --- ParallelTerminationStrategy: PID 25111 died... 01:39:46.746728 run iperf3-srv_10.42.42.10(pid=25111): Terminated {rc=256} 01:39:46.757087 --- ParallelTerminationStrategy: PID 25114 died... 01:39:46.810809 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25114): Terminated: ok {rc=0} 01:39:46.821262 --- ParallelTerminationStrategy: PID 25117 died... 01:39:46.874551 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25117): Terminated: ok {rc=0} 01:39:46.884469 --- ParallelTerminationStrategy: PID 25120 died... 01:39:46.938093 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25120): Terminated: ok {rc=0} 01:39:47.026311 bus /gobi_0: Setting Powered False 01:39:48.129853 bus /gobi_0: Setting Powered False 01:39:49.238022 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25118): Process ended prematurely: osmo-stp_10.42.42.5(pid=25118) [trial-2397↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25118)]