Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=1579): Process ended prematurely: osmo-stp_10.42.42.5(pid=1579) [trial-2398↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1579)]
Standard Output
---------------------------------------------- trial-2398 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 03:10:48.448044 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:10:48.458641 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 03:10:48.584388 tst cs_paging_gprs_active.py: using LAC 38139 03:10:48.703071 tst cs_paging_gprs_active.py: using RAC 144 03:10:48.824034 tst cs_paging_gprs_active.py: using CellId 38139 03:10:48.946676 tst cs_paging_gprs_active.py: using BVCI 38140 03:10:48.969847 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:10:48.980560 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:10:48.991113 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:10:49.001532 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:10:49.011786 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:10:49.022535 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:10:49.033220 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:10:49.043831 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:10:49.054437 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 03:10:49.169090 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 03:10:49.465825 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:10:49.602261 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:10:49.938523 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1568): Launched 03:10:50.219301 run iperf3-srv_10.42.42.10(pid=1569): Launched 03:10:50.420064 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:10:50.556384 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:10:50.894651 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1570): Launched 03:10:51.174827 run iperf3-srv_10.42.42.10(pid=1571): Launched 03:10:51.375318 tst cs_paging_gprs_active.py:38: start network... 03:10:51.511904 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:10:52.031719 run create_hlr_db(pid=1572): Launched 03:10:52.219564 bus /sierra_2: Setting Powered False 03:10:53.240598 run create_hlr_db(pid=1572): Terminated: ok {rc=0} 03:10:53.673510 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1575): Launched 03:10:53.999337 run osmo-hlr_10.42.42.2(pid=1576): Launched 03:10:54.121787 run osmo-stp_10.42.42.5: Starting osmo-stp 03:10:54.688552 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1578): Launched 03:10:55.016931 run osmo-stp_10.42.42.5(pid=1579): Launched 03:10:55.136017 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:10:55.705773 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1581): Launched 03:10:55.822531 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:10:56.108004 run patchelf(pid=1582): Launched 03:10:56.299330 run osmo-stp_10.42.42.5(pid=1579): ERR: Terminated: ERROR {rc=1} [trial-2398↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1579)] 03:10:56.439328 run osmo-stp_10.42.42.5(pid=1579): stdout: | (launched: 2022-12-14_03:10:54.854583) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:10:56.578702 run osmo-stp_10.42.42.5(pid=1579): stderr: | �[0;m�[38;5;43m20221214031055047 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214031055047 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214031055047 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214031055048 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214031055048 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214031055048 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214031055048 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:10:56.714161 run osmo-stp_10.42.42.5(pid=1579): stdout: | (launched: 2022-12-14_03:10:54.854583) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:10:56.848039 run osmo-stp_10.42.42.5(pid=1579): stderr: | �[0;m�[38;5;43m20221214031055047 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214031055047 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214031055047 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214031055048 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214031055048 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214031055048 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214031055048 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:10:57.005123 run patchelf(pid=1582): Terminating (SIGINT) 03:10:57.189785 run patchelf(pid=1582): Terminated: ok {rc=0} 03:10:57.223338 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=1579): Process ended prematurely: osmo-stp_10.42.42.5(pid=1579) [trial-2398↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1579)] [trial-2398↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 03:10:57.233222 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 03:10:57.296253 run osmo-hlr_10.42.42.2(pid=1576): ERR: Terminated: ERROR {rc=237} [trial-2398↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1576)] 03:10:57.347497 run osmo-hlr_10.42.42.2(pid=1576): stdout: | (launched: 2022-12-14_03:10:53.839264) 03:10:57.399980 run osmo-hlr_10.42.42.2(pid=1576): stderr: | �[0;m�[1;31m20221214031054040 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214031054040 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214031054040 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214031054040 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214031054040 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214031054040 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214031054051 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214031054060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214031054060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214031054060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:10:57.444602 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1568): Terminating (SIGTERM) 03:10:57.486549 run iperf3-srv_10.42.42.10(pid=1569): Terminating (SIGTERM) 03:10:57.528360 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1570): Terminating (SIGTERM) 03:10:57.570251 run iperf3-srv_10.42.42.10(pid=1571): Terminating (SIGTERM) 03:10:57.612122 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1575): Terminating (SIGTERM) 03:10:57.654185 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1578): Terminating (SIGTERM) 03:10:57.696035 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1581): Terminating (SIGTERM) 03:10:57.705770 --- ParallelTerminationStrategy: PID 1568 died... 03:10:57.762455 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1568): Terminated: ok {rc=0} 03:10:57.772517 --- ParallelTerminationStrategy: PID 1569 died... 03:10:57.828766 run iperf3-srv_10.42.42.10(pid=1569): Terminated {rc=256} 03:10:57.838873 --- ParallelTerminationStrategy: PID 1570 died... 03:10:57.894942 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1570): Terminated: ok {rc=0} 03:10:57.905153 --- ParallelTerminationStrategy: PID 1571 died... 03:10:57.961084 run iperf3-srv_10.42.42.10(pid=1571): Terminated {rc=256} 03:10:57.971020 --- ParallelTerminationStrategy: PID 1575 died... 03:10:58.026952 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1575): Terminated: ok {rc=0} 03:10:58.036918 --- ParallelTerminationStrategy: PID 1578 died... 03:10:58.092989 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1578): Terminated: ok {rc=0} 03:10:58.103108 --- ParallelTerminationStrategy: PID 1581 died... 03:10:58.159720 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1581): Terminated: ok {rc=0} 03:10:58.246953 bus /gobi_0: Setting Powered False 03:10:59.352817 bus /gobi_0: Setting Powered False 03:11:00.461991 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1579): Process ended prematurely: osmo-stp_10.42.42.5(pid=1579) [trial-2398↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1579)]