Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=28952): Process ended prematurely: osmo-stp_10.42.42.5(pid=28952) [trial-2398↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28952)]
Standard Output
---------------------------------------------- trial-2398 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 02:22:22.605852 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:22:22.616278 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 02:22:22.737913 tst cs_paging_gprs_active.py: using LAC 37880 02:22:22.854663 tst cs_paging_gprs_active.py: using RAC 140 02:22:22.971432 tst cs_paging_gprs_active.py: using CellId 37880 02:22:23.099462 tst cs_paging_gprs_active.py: using BVCI 37881 02:22:23.123959 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:22:23.135384 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:22:23.146358 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:22:23.157462 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:22:23.169169 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:22:23.180829 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:22:23.192863 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:22:23.204584 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:22:23.216399 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:22:23.334584 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:22:23.614857 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:22:23.739371 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:22:24.048706 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28942): Launched 02:22:24.305732 run iperf3-srv_10.42.42.10(pid=28943): Launched 02:22:24.486415 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:22:24.610008 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:22:24.918546 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28944): Launched 02:22:25.175492 run iperf3-srv_10.42.42.10(pid=28945): Launched 02:22:25.356242 tst cs_paging_gprs_active.py:38: start network... 02:22:25.479693 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:22:25.960874 run create_hlr_db(pid=28946): Launched 02:22:26.131887 bus /gobi_6: Setting Powered False 02:22:27.154319 run create_hlr_db(pid=28946): Terminated: ok {rc=0} 02:22:27.581834 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28948): Launched 02:22:27.904511 run osmo-hlr_10.42.42.2(pid=28949): Launched 02:22:28.024385 run osmo-stp_10.42.42.5: Starting osmo-stp 02:22:28.582343 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28951): Launched 02:22:28.905202 run osmo-stp_10.42.42.5(pid=28952): Launched 02:22:29.023502 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:22:29.583328 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28954): Launched 02:22:29.697920 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:22:29.978556 run patchelf(pid=28955): Launched 02:22:30.166361 run osmo-stp_10.42.42.5(pid=28952): ERR: Terminated: ERROR {rc=1} [trial-2398↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28952)] 02:22:30.303992 run osmo-stp_10.42.42.5(pid=28952): stdout: | (launched: 2022-12-14_02:22:28.745832) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:22:30.441885 run osmo-stp_10.42.42.5(pid=28952): stderr: | �[0;m�[38;5;43m20221214022228940 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214022228940 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214022228941 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214022228941 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214022228941 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214022228942 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214022228942 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:22:30.575225 run osmo-stp_10.42.42.5(pid=28952): stdout: | (launched: 2022-12-14_02:22:28.745832) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:22:30.707259 run osmo-stp_10.42.42.5(pid=28952): stderr: | �[0;m�[38;5;43m20221214022228940 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214022228940 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214022228941 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214022228941 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214022228941 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214022228942 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214022228942 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:22:30.878197 run patchelf(pid=28955): Terminating (SIGINT) 02:22:31.063444 run patchelf(pid=28955): Terminated: ok {rc=0} 02:22:31.098047 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28952): Process ended prematurely: osmo-stp_10.42.42.5(pid=28952) [trial-2398↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28952)] [trial-2398↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 02:22:31.109099 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 02:22:31.175296 run osmo-hlr_10.42.42.2(pid=28949): ERR: Terminated: ERROR {rc=237} [trial-2398↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28949)] 02:22:31.229658 run osmo-hlr_10.42.42.2(pid=28949): stdout: | (launched: 2022-12-14_02:22:27.745403) 02:22:31.284682 run osmo-hlr_10.42.42.2(pid=28949): stderr: | �[0;m�[1;31m20221214022227945 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214022227945 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214022227945 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214022227945 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214022227945 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214022227945 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214022227957 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214022227966 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214022227966 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214022227966 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:22:31.332037 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28942): Terminating (SIGTERM) 02:22:31.378435 run iperf3-srv_10.42.42.10(pid=28943): Terminating (SIGTERM) 02:22:31.424616 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28944): Terminating (SIGTERM) 02:22:31.471030 run iperf3-srv_10.42.42.10(pid=28945): Terminating (SIGTERM) 02:22:31.517303 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28948): Terminating (SIGTERM) 02:22:31.561835 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28951): Terminating (SIGTERM) 02:22:31.606511 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28954): Terminating (SIGTERM) 02:22:31.616640 --- ParallelTerminationStrategy: PID 28942 died... 02:22:31.676253 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28942): Terminated: ok {rc=0} 02:22:31.687740 --- ParallelTerminationStrategy: PID 28943 died... 02:22:31.745742 run iperf3-srv_10.42.42.10(pid=28943): Terminated {rc=256} 02:22:31.757494 --- ParallelTerminationStrategy: PID 28944 died... 02:22:31.815477 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28944): Terminated: ok {rc=0} 02:22:31.827110 --- ParallelTerminationStrategy: PID 28945 died... 02:22:31.885495 run iperf3-srv_10.42.42.10(pid=28945): Terminated {rc=256} 02:22:31.897298 --- ParallelTerminationStrategy: PID 28948 died... 02:22:31.955647 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28948): Terminated: ok {rc=0} 02:22:31.966538 --- ParallelTerminationStrategy: PID 28951 died... 02:22:32.026016 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28951): Terminated: ok {rc=0} 02:22:32.036928 --- ParallelTerminationStrategy: PID 28954 died... 02:22:32.096389 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28954): Terminated: ok {rc=0} 02:22:32.187408 bus /gobi_0: Setting Powered False 02:22:33.292554 bus /gobi_0: Setting Powered False 02:22:34.400461 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28952): Process ended prematurely: osmo-stp_10.42.42.5(pid=28952) [trial-2398↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28952)]