Failed
gprs:sysmo+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=28524): Process ended prematurely: osmo-stp_10.42.42.5(pid=28524) [trial-2398↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28524)]
Standard Output
---------------------------------------------- trial-2398 gprs:sysmo+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 02:16:22.477146 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:16:22.488852 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 02:16:22.640528 tst ping_idle_ping.py: using LAC 37847 02:16:22.766441 tst ping_idle_ping.py: using RAC 107 02:16:22.892835 tst ping_idle_ping.py: using CellId 37847 02:16:23.022866 tst ping_idle_ping.py: using BVCI 37848 02:16:23.047460 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:16:23.059010 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:16:23.070152 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:16:23.081281 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:16:23.092465 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:16:23.103618 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:16:23.115075 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:16:23.126306 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 02:16:23.401598 tst ping_idle_ping.py:24: start network... 02:16:23.524864 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:16:24.002058 run create_hlr_db(pid=28518): Launched 02:16:24.173073 bus /gobi_6: Setting Powered False 02:16:25.208086 run create_hlr_db(pid=28518): Terminated: ok {rc=0} 02:16:25.609145 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28520): Launched 02:16:25.908364 run osmo-hlr_10.42.42.2(pid=28521): Launched 02:16:26.027117 run osmo-stp_10.42.42.5: Starting osmo-stp 02:16:26.552883 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28523): Launched 02:16:26.851901 run osmo-stp_10.42.42.5(pid=28524): Launched 02:16:26.960397 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:16:27.479272 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28526): Launched 02:16:27.596875 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:16:27.877834 run patchelf(pid=28527): Launched 02:16:28.066026 run osmo-stp_10.42.42.5(pid=28524): ERR: Terminated: ERROR {rc=1} [trial-2398↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28524)] 02:16:28.203371 run osmo-stp_10.42.42.5(pid=28524): stdout: | (launched: 2022-12-14_02:16:26.704454) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:16:28.341525 run osmo-stp_10.42.42.5(pid=28524): stderr: | �[0;m�[38;5;43m20221214021626877 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214021626877 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214021626877 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214021626878 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214021626878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214021626878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214021626878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:16:28.475108 run osmo-stp_10.42.42.5(pid=28524): stdout: | (launched: 2022-12-14_02:16:26.704454) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:16:28.607913 run osmo-stp_10.42.42.5(pid=28524): stderr: | �[0;m�[38;5;43m20221214021626877 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214021626877 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214021626877 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214021626878 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214021626878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214021626878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214021626878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:16:28.763286 run patchelf(pid=28527): Terminating (SIGINT) 02:16:28.944927 run patchelf(pid=28527): Terminated: ok {rc=0} 02:16:28.978017 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=28524): Process ended prematurely: osmo-stp_10.42.42.5(pid=28524) [trial-2398↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28524)] [trial-2398↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 02:16:28.987608 tst ping_idle_ping.py:27: Test FAILED (6.5 sec) 02:16:29.052076 run osmo-hlr_10.42.42.2(pid=28521): ERR: Terminated: ERROR {rc=237} [trial-2398↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28521)] 02:16:29.104483 run osmo-hlr_10.42.42.2(pid=28521): stdout: | (launched: 2022-12-14_02:16:25.760754) 02:16:29.157461 run osmo-hlr_10.42.42.2(pid=28521): stderr: | �[0;m�[1;31m20221214021625939 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214021625939 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214021625939 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214021625939 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214021625939 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214021625939 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214021625951 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:sysmo+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214021625960 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214021625960 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214021625960 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:16:29.202878 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28520): Terminating (SIGTERM) 02:16:29.246227 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28523): Terminating (SIGTERM) 02:16:29.288836 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28526): Terminating (SIGTERM) 02:16:29.298784 --- ParallelTerminationStrategy: PID 28520 died... 02:16:29.356313 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28520): Terminated: ok {rc=0} 02:16:29.366535 --- ParallelTerminationStrategy: PID 28523 died... 02:16:29.423875 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28523): Terminated: ok {rc=0} 02:16:29.434070 --- ParallelTerminationStrategy: PID 28526 died... 02:16:29.490959 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28526): Terminated: ok {rc=0} 02:16:29.576969 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28524): Process ended prematurely: osmo-stp_10.42.42.5(pid=28524) [trial-2398↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28524)]