Failed
gprs:trx-b200+mod-bts0-egprs.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=29884): Process ended prematurely: osmo-stp_10.42.42.5(pid=29884) [trial-2398↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29884)]
Standard Output
---------------------------------------------- trial-2398 gprs:trx-b200+mod-bts0-egprs ping_idle_ping.py ---------------------------------------------- 02:31:44.668200 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:44.679507 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 02:31:44.818977 tst ping_idle_ping.py: using LAC 37930 02:31:44.933089 tst ping_idle_ping.py: using RAC 190 02:31:45.046752 tst ping_idle_ping.py: using CellId 37930 02:31:45.159700 tst ping_idle_ping.py: using BVCI 37931 02:31:45.182089 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:45.192797 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:45.203420 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:45.214144 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:45.225126 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:45.235585 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:45.246287 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:31:45.257142 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:31:45.527910 tst ping_idle_ping.py:24: start network... 02:31:45.650456 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:31:46.195217 run create_hlr_db(pid=29878): Launched 02:31:46.383142 bus /gobi_6: Setting Powered False 02:31:47.399557 run create_hlr_db(pid=29878): Terminated: ok {rc=0} 02:31:47.792688 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29880): Launched 02:31:48.086279 run osmo-hlr_10.42.42.2(pid=29881): Launched 02:31:48.205154 run osmo-stp_10.42.42.5: Starting osmo-stp 02:31:48.723392 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29883): Launched 02:31:49.017479 run osmo-stp_10.42.42.5(pid=29884): Launched 02:31:49.124467 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:31:49.637598 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29886): Launched 02:31:49.742137 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:31:50.000166 run patchelf(pid=29887): Launched 02:31:50.172326 run osmo-stp_10.42.42.5(pid=29884): ERR: Terminated: ERROR {rc=1} [trial-2398↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29884)] 02:31:50.297970 run osmo-stp_10.42.42.5(pid=29884): stdout: | (launched: 2022-12-14_02:31:48.872840) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:31:50.424145 run osmo-stp_10.42.42.5(pid=29884): stderr: | �[0;m�[38;5;43m20221214023149043 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214023149043 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214023149043 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214023149044 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214023149044 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214023149044 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214023149044 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:31:50.546156 run osmo-stp_10.42.42.5(pid=29884): stdout: | (launched: 2022-12-14_02:31:48.872840) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:31:50.667020 run osmo-stp_10.42.42.5(pid=29884): stderr: | �[0;m�[38;5;43m20221214023149043 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214023149043 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214023149043 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214023149044 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214023149044 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214023149044 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214023149044 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:31:50.808916 run patchelf(pid=29887): Terminating (SIGINT) 02:31:50.977113 run patchelf(pid=29887): Terminated: ok {rc=0} 02:31:51.007628 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=29884): Process ended prematurely: osmo-stp_10.42.42.5(pid=29884) [trial-2398↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29884)] [trial-2398↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27] 02:31:51.016208 tst ping_idle_ping.py:27: Test FAILED (6.3 sec) 02:31:51.075781 run osmo-hlr_10.42.42.2(pid=29881): ERR: Terminated: ERROR {rc=237} [trial-2398↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29881)] 02:31:51.124252 run osmo-hlr_10.42.42.2(pid=29881): stdout: | (launched: 2022-12-14_02:31:47.941719) 02:31:51.173340 run osmo-hlr_10.42.42.2(pid=29881): stderr: | �[0;m�[1;31m20221214023148117 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214023148117 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214023148117 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214023148117 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214023148117 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214023148117 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214023148130 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:trx-b200+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214023148138 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214023148138 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214023148138 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:31:51.215095 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29880): Terminating (SIGTERM) 02:31:51.254338 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29883): Terminating (SIGTERM) 02:31:51.293763 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29886): Terminating (SIGTERM) 02:31:51.302885 --- ParallelTerminationStrategy: PID 29880 died... 02:31:51.355727 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29880): Terminated: ok {rc=0} 02:31:51.365360 --- ParallelTerminationStrategy: PID 29883 died... 02:31:51.417675 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29883): Terminated: ok {rc=0} 02:31:51.427101 --- ParallelTerminationStrategy: PID 29886 died... 02:31:51.479488 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29886): Terminated: ok {rc=0} 02:31:51.562021 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29884): Process ended prematurely: osmo-stp_10.42.42.5(pid=29884) [trial-2398↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29884)]