Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=30038): Process ended prematurely: osmo-stp_10.42.42.5(pid=30038) [trial-2398↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30038)]
Standard Output
---------------------------------------------- trial-2398 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 02:33:53.204010 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:33:53.215564 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 02:33:53.361929 tst cs_paging_gprs_active.py: using LAC 37941 02:33:53.480531 tst cs_paging_gprs_active.py: using RAC 201 02:33:53.596556 tst cs_paging_gprs_active.py: using CellId 37941 02:33:53.714341 tst cs_paging_gprs_active.py: using BVCI 37942 02:33:53.737690 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:33:53.748760 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:33:53.759613 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:33:53.770536 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:33:53.781349 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:33:53.792188 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:33:53.803400 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:33:53.814256 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:33:53.825303 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 02:33:53.946408 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 02:33:54.241576 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:33:54.377810 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:33:54.710709 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30028): Launched 02:33:54.987150 run iperf3-srv_10.42.42.10(pid=30029): Launched 02:33:55.185461 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:33:55.321261 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:33:55.653434 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30030): Launched 02:33:55.930651 run iperf3-srv_10.42.42.10(pid=30031): Launched 02:33:56.128464 tst cs_paging_gprs_active.py:38: start network... 02:33:56.264079 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:33:56.771968 run create_hlr_db(pid=30032): Launched 02:33:56.958720 bus /gobi_6: Setting Powered False 02:33:57.980379 run create_hlr_db(pid=30032): Terminated: ok {rc=0} 02:33:58.382331 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30034): Launched 02:33:58.682110 run osmo-hlr_10.42.42.2(pid=30035): Launched 02:33:58.793132 run osmo-stp_10.42.42.5: Starting osmo-stp 02:33:59.311608 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30037): Launched 02:33:59.611284 run osmo-stp_10.42.42.5(pid=30038): Launched 02:33:59.720428 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:34:00.242358 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30040): Launched 02:34:00.349102 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:34:00.610238 run patchelf(pid=30041): Launched 02:34:00.785718 run osmo-stp_10.42.42.5(pid=30038): ERR: Terminated: ERROR {rc=1} [trial-2398↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30038)] 02:34:00.921063 run osmo-stp_10.42.42.5(pid=30038): stdout: | (launched: 2022-12-14_02:33:59.463844) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:34:01.052158 run osmo-stp_10.42.42.5(pid=30038): stderr: | �[0;m�[38;5;43m20221214023359634 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214023359635 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214023359635 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214023359635 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214023359636 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214023359636 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214023359636 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:34:01.178633 run osmo-stp_10.42.42.5(pid=30038): stdout: | (launched: 2022-12-14_02:33:59.463844) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:34:01.303758 run osmo-stp_10.42.42.5(pid=30038): stderr: | �[0;m�[38;5;43m20221214023359634 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214023359635 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214023359635 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214023359635 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214023359636 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214023359636 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214023359636 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:34:01.450763 run patchelf(pid=30041): Terminating (SIGINT) 02:34:01.623505 run patchelf(pid=30041): Terminated: ok {rc=0} 02:34:01.655968 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30038): Process ended prematurely: osmo-stp_10.42.42.5(pid=30038) [trial-2398↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30038)] [trial-2398↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 02:34:01.666295 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 02:34:01.727195 run osmo-hlr_10.42.42.2(pid=30035): ERR: Terminated: ERROR {rc=237} [trial-2398↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30035)] 02:34:01.777090 run osmo-hlr_10.42.42.2(pid=30035): stdout: | (launched: 2022-12-14_02:33:58.534273) 02:34:01.827661 run osmo-hlr_10.42.42.2(pid=30035): stderr: | �[0;m�[1;31m20221214023358713 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214023358713 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214023358713 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214023358713 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214023358713 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214023358713 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214023358725 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214023358734 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214023358734 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214023358734 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:34:01.870847 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30028): Terminating (SIGTERM) 02:34:01.913696 run iperf3-srv_10.42.42.10(pid=30029): Terminating (SIGTERM) 02:34:01.956184 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30030): Terminating (SIGTERM) 02:34:01.998544 run iperf3-srv_10.42.42.10(pid=30031): Terminating (SIGTERM) 02:34:02.041310 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30034): Terminating (SIGTERM) 02:34:02.081684 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30037): Terminating (SIGTERM) 02:34:02.124142 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30040): Terminating (SIGTERM) 02:34:02.133594 --- ParallelTerminationStrategy: PID 30028 died... 02:34:02.187214 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30028): Terminated: ok {rc=0} 02:34:02.197120 --- ParallelTerminationStrategy: PID 30029 died... 02:34:02.250097 run iperf3-srv_10.42.42.10(pid=30029): Terminated {rc=256} 02:34:02.259513 --- ParallelTerminationStrategy: PID 30030 died... 02:34:02.311899 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30030): Terminated: ok {rc=0} 02:34:02.321408 --- ParallelTerminationStrategy: PID 30031 died... 02:34:02.373526 run iperf3-srv_10.42.42.10(pid=30031): Terminated {rc=256} 02:34:02.382914 --- ParallelTerminationStrategy: PID 30034 died... 02:34:02.435452 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30034): Terminated: ok {rc=0} 02:34:02.444873 --- ParallelTerminationStrategy: PID 30037 died... 02:34:02.497319 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30037): Terminated: ok {rc=0} 02:34:02.506788 --- ParallelTerminationStrategy: PID 30040 died... 02:34:02.559365 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30040): Terminated: ok {rc=0} 02:34:02.646906 bus /gobi_0: Setting Powered False 02:34:03.750459 bus /gobi_0: Setting Powered False 02:34:04.861554 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30038): Process ended prematurely: osmo-stp_10.42.42.5(pid=30038) [trial-2398↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30038)]