Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=29763): Process ended prematurely: osmo-stp_10.42.42.5(pid=29763) [trial-2398↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29763)]
Standard Output
---------------------------------------------- trial-2398 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 02:29:55.444759 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:29:55.455635 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 02:29:55.598915 tst cs_paging_gprs_active.py: using LAC 37921 02:29:55.725898 tst cs_paging_gprs_active.py: using RAC 181 02:29:55.855838 tst cs_paging_gprs_active.py: using CellId 37921 02:29:55.980066 tst cs_paging_gprs_active.py: using BVCI 37922 02:29:56.004623 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:29:56.015546 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:29:56.026322 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:29:56.036919 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:29:56.048222 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:29:56.059514 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:29:56.070681 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:29:56.081709 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:29:56.092857 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 02:29:56.208799 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 02:29:56.483213 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:29:56.607917 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:29:56.916322 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29750): Launched 02:29:57.173332 run iperf3-srv_10.42.42.10(pid=29751): Launched 02:29:57.355077 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:29:57.479112 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:29:57.795642 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29752): Launched 02:29:58.070521 run iperf3-srv_10.42.42.10(pid=29753): Launched 02:29:58.267632 tst cs_paging_gprs_active.py:38: start network... 02:29:58.402248 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:29:58.906247 run create_hlr_db(pid=29754): Launched 02:29:59.091406 bus /sierra_2: Setting Powered False 02:30:00.112688 run create_hlr_db(pid=29754): Terminated: ok {rc=0} 02:30:00.513614 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29756): Launched 02:30:00.811397 run osmo-hlr_10.42.42.2(pid=29757): Launched 02:30:01.021274 run osmo-stp_10.42.42.5: Starting osmo-stp 02:30:01.620588 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29762): Launched 02:30:02.059184 run osmo-stp_10.42.42.5(pid=29763): Launched 02:30:02.249266 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:30:02.769450 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29765): Launched 02:30:02.875785 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:30:03.136194 run patchelf(pid=29766): Launched 02:30:03.311719 run osmo-stp_10.42.42.5(pid=29763): ERR: Terminated: ERROR {rc=1} [trial-2398↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29763)] 02:30:03.439860 run osmo-stp_10.42.42.5(pid=29763): stdout: | (launched: 2022-12-14_02:30:01.789415) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:30:03.568273 run osmo-stp_10.42.42.5(pid=29763): stderr: | �[0;m�[38;5;43m20221214023002064 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214023002064 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214023002064 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214023002065 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214023002065 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214023002065 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214023002066 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:30:03.692316 run osmo-stp_10.42.42.5(pid=29763): stdout: | (launched: 2022-12-14_02:30:01.789415) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:30:03.815356 run osmo-stp_10.42.42.5(pid=29763): stderr: | �[0;m�[38;5;43m20221214023002064 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214023002064 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214023002064 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214023002065 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214023002065 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214023002065 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214023002066 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:30:03.959090 run patchelf(pid=29766): Terminating (SIGINT) 02:30:04.128393 run patchelf(pid=29766): Terminated: ok {rc=0} 02:30:04.159758 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=29763): Process ended prematurely: osmo-stp_10.42.42.5(pid=29763) [trial-2398↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29763)] [trial-2398↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 02:30:04.169171 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 02:30:04.229020 run osmo-hlr_10.42.42.2(pid=29757): ERR: Terminated: ERROR {rc=237} [trial-2398↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29757)] 02:30:04.277928 run osmo-hlr_10.42.42.2(pid=29757): stdout: | (launched: 2022-12-14_02:30:00.665676) 02:30:04.327591 run osmo-hlr_10.42.42.2(pid=29757): stderr: | �[0;m�[1;31m20221214023000867 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214023000867 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214023000867 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214023000867 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214023000867 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214023000867 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214023000879 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214023000898 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214023000898 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214023000899 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:30:04.369930 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29750): Terminating (SIGTERM) 02:30:04.409753 run iperf3-srv_10.42.42.10(pid=29751): Terminating (SIGTERM) 02:30:04.449692 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29752): Terminating (SIGTERM) 02:30:04.489459 run iperf3-srv_10.42.42.10(pid=29753): Terminating (SIGTERM) 02:30:04.529297 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29756): Terminating (SIGTERM) 02:30:04.569062 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29762): Terminating (SIGTERM) 02:30:04.608835 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29765): Terminating (SIGTERM) 02:30:04.618077 --- ParallelTerminationStrategy: PID 29750 died... 02:30:04.671280 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29750): Terminated: ok {rc=0} 02:30:04.680768 --- ParallelTerminationStrategy: PID 29751 died... 02:30:04.733348 run iperf3-srv_10.42.42.10(pid=29751): Terminated {rc=256} 02:30:04.742793 --- ParallelTerminationStrategy: PID 29752 died... 02:30:04.794990 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29752): Terminated: ok {rc=0} 02:30:04.804350 --- ParallelTerminationStrategy: PID 29753 died... 02:30:04.856678 run iperf3-srv_10.42.42.10(pid=29753): Terminated {rc=256} 02:30:04.866115 --- ParallelTerminationStrategy: PID 29756 died... 02:30:04.918349 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29756): Terminated: ok {rc=0} 02:30:04.927768 --- ParallelTerminationStrategy: PID 29762 died... 02:30:04.980194 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29762): Terminated: ok {rc=0} 02:30:04.989672 --- ParallelTerminationStrategy: PID 29765 died... 02:30:05.041912 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29765): Terminated: ok {rc=0} 02:30:05.129487 bus /gobi_0: Setting Powered False 02:30:06.231839 bus /gobi_0: Setting Powered False 02:30:07.342121 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29763): Process ended prematurely: osmo-stp_10.42.42.5(pid=29763) [trial-2398↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29763)]