Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=30862): Process ended prematurely: osmo-stp_10.42.42.5(pid=30862) [trial-2398↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30862)]
Standard Output
---------------------------------------------- trial-2398 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 02:41:43.969739 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:41:43.981005 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 02:41:44.149801 tst cs_paging_gprs_active.py: using LAC 37983 02:41:44.278325 tst cs_paging_gprs_active.py: using RAC 243 02:41:44.406428 tst cs_paging_gprs_active.py: using CellId 37983 02:41:44.535847 tst cs_paging_gprs_active.py: using BVCI 37984 02:41:44.561088 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:41:44.572321 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:41:44.583598 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:41:44.594801 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:41:44.606851 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:41:44.618733 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:41:44.630792 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:41:44.642779 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:41:44.655042 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:41:44.776938 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:41:45.076080 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:41:45.212382 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:41:45.549171 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30852): Launched 02:41:45.829401 run iperf3-srv_10.42.42.10(pid=30853): Launched 02:41:46.037817 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:41:46.177420 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:41:46.546395 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30854): Launched 02:41:46.872801 run iperf3-srv_10.42.42.10(pid=30855): Launched 02:41:47.105816 tst cs_paging_gprs_active.py:38: start network... 02:41:47.244860 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:41:47.734123 run create_hlr_db(pid=30856): Launched 02:41:47.908221 bus /gobi_6: Setting Powered False 02:41:48.929759 run create_hlr_db(pid=30856): Terminated: ok {rc=0} 02:41:49.356782 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30858): Launched 02:41:49.659123 run osmo-hlr_10.42.42.2(pid=30859): Launched 02:41:49.773175 run osmo-stp_10.42.42.5: Starting osmo-stp 02:41:50.296389 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30861): Launched 02:41:50.599195 run osmo-stp_10.42.42.5(pid=30862): Launched 02:41:50.709542 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:41:51.236540 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30864): Launched 02:41:51.343551 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:41:51.606360 run patchelf(pid=30865): Launched 02:41:51.782425 run osmo-stp_10.42.42.5(pid=30862): ERR: Terminated: ERROR {rc=1} [trial-2398↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30862)] 02:41:51.910805 run osmo-stp_10.42.42.5(pid=30862): stdout: | (launched: 2022-12-14_02:41:50.450741) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:41:52.039740 run osmo-stp_10.42.42.5(pid=30862): stderr: | �[0;m�[38;5;43m20221214024150621 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214024150622 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214024150622 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214024150622 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214024150624 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214024150625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214024150625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:41:52.164184 run osmo-stp_10.42.42.5(pid=30862): stdout: | (launched: 2022-12-14_02:41:50.450741) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:41:52.287685 run osmo-stp_10.42.42.5(pid=30862): stderr: | �[0;m�[38;5;43m20221214024150621 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214024150622 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214024150622 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214024150622 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214024150624 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214024150625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214024150625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:41:52.431839 run patchelf(pid=30865): Terminating (SIGINT) 02:41:52.602079 run patchelf(pid=30865): Terminated: ok {rc=0} 02:41:52.633331 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30862): Process ended prematurely: osmo-stp_10.42.42.5(pid=30862) [trial-2398↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30862)] [trial-2398↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 02:41:52.642586 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 02:41:52.701891 run osmo-hlr_10.42.42.2(pid=30859): ERR: Terminated: ERROR {rc=237} [trial-2398↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30859)] 02:41:52.751039 run osmo-hlr_10.42.42.2(pid=30859): stdout: | (launched: 2022-12-14_02:41:49.510886) 02:41:52.800590 run osmo-hlr_10.42.42.2(pid=30859): stderr: | �[0;m�[1;31m20221214024149688 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214024149688 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214024149688 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214024149689 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214024149689 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214024149689 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214024149701 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214024149710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214024149710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214024149710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:41:52.842505 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30852): Terminating (SIGTERM) 02:41:52.881940 run iperf3-srv_10.42.42.10(pid=30853): Terminating (SIGTERM) 02:41:52.921338 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30854): Terminating (SIGTERM) 02:41:52.960506 run iperf3-srv_10.42.42.10(pid=30855): Terminating (SIGTERM) 02:41:52.999904 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30858): Terminating (SIGTERM) 02:41:53.039321 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30861): Terminating (SIGTERM) 02:41:53.078678 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30864): Terminating (SIGTERM) 02:41:53.087733 --- ParallelTerminationStrategy: PID 30852 died... 02:41:53.140172 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30852): Terminated: ok {rc=0} 02:41:53.149628 --- ParallelTerminationStrategy: PID 30853 died... 02:41:53.201833 run iperf3-srv_10.42.42.10(pid=30853): Terminated {rc=256} 02:41:53.211168 --- ParallelTerminationStrategy: PID 30854 died... 02:41:53.263446 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30854): Terminated: ok {rc=0} 02:41:53.272728 --- ParallelTerminationStrategy: PID 30855 died... 02:41:53.324729 run iperf3-srv_10.42.42.10(pid=30855): Terminated {rc=256} 02:41:53.334072 --- ParallelTerminationStrategy: PID 30858 died... 02:41:53.386407 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30858): Terminated: ok {rc=0} 02:41:53.395819 --- ParallelTerminationStrategy: PID 30861 died... 02:41:53.448129 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30861): Terminated: ok {rc=0} 02:41:53.457581 --- ParallelTerminationStrategy: PID 30864 died... 02:41:53.509811 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30864): Terminated: ok {rc=0} 02:41:53.596082 bus /gobi_0: Setting Powered False 02:41:54.697469 bus /gobi_0: Setting Powered False 02:41:55.807323 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30862): Process ended prematurely: osmo-stp_10.42.42.5(pid=30862) [trial-2398↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30862)]