Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=30717): Process ended prematurely: osmo-stp_10.42.42.5(pid=30717) [trial-2398↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30717)]
Standard Output
---------------------------------------------- trial-2398 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 02:39:42.697557 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:39:42.708313 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 02:39:42.854564 tst cs_paging_gprs_active.py: using LAC 37973 02:39:42.982716 tst cs_paging_gprs_active.py: using RAC 233 02:39:43.112434 tst cs_paging_gprs_active.py: using CellId 37973 02:39:43.240568 tst cs_paging_gprs_active.py: using BVCI 37974 02:39:43.265754 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:39:43.277061 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:39:43.288183 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:39:43.299384 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:39:43.310801 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:39:43.322306 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:39:43.333970 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:39:43.345687 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:39:43.357308 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:39:43.476114 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:39:43.774275 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:39:43.911440 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:39:44.249998 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30707): Launched 02:39:44.531299 run iperf3-srv_10.42.42.10(pid=30708): Launched 02:39:44.732023 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:39:44.869201 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:39:45.207708 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30709): Launched 02:39:45.489983 run iperf3-srv_10.42.42.10(pid=30710): Launched 02:39:45.690282 tst cs_paging_gprs_active.py:38: start network... 02:39:45.827343 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:39:46.363224 run create_hlr_db(pid=30711): Launched 02:39:46.557248 bus /gobi_6: Setting Powered False 02:39:47.562811 run create_hlr_db(pid=30711): Terminated: ok {rc=0} 02:39:48.010457 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30713): Launched 02:39:48.339264 run osmo-hlr_10.42.42.2(pid=30714): Launched 02:39:48.460005 run osmo-stp_10.42.42.5: Starting osmo-stp 02:39:49.029221 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30716): Launched 02:39:49.357120 run osmo-stp_10.42.42.5(pid=30717): Launched 02:39:49.477942 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:39:50.050228 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30719): Launched 02:39:50.167642 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:39:50.454306 run patchelf(pid=30720): Launched 02:39:50.646489 run osmo-stp_10.42.42.5(pid=30717): ERR: Terminated: ERROR {rc=1} [trial-2398↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30717)] 02:39:50.787003 run osmo-stp_10.42.42.5(pid=30717): stdout: | (launched: 2022-12-14_02:39:49.195509) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:39:50.927443 run osmo-stp_10.42.42.5(pid=30717): stderr: | �[0;m�[38;5;43m20221214023949388 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214023949388 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214023949388 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214023949389 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214023949391 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214023949391 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214023949391 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:39:51.063769 run osmo-stp_10.42.42.5(pid=30717): stdout: | (launched: 2022-12-14_02:39:49.195509) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:39:51.198806 run osmo-stp_10.42.42.5(pid=30717): stderr: | �[0;m�[38;5;43m20221214023949388 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214023949388 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214023949388 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214023949389 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214023949391 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214023949391 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214023949391 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:39:51.356374 run patchelf(pid=30720): Terminating (SIGINT) 02:39:51.542244 run patchelf(pid=30720): Terminated: ok {rc=0} 02:39:51.576147 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30717): Process ended prematurely: osmo-stp_10.42.42.5(pid=30717) [trial-2398↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30717)] [trial-2398↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 02:39:51.586299 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 02:39:51.649794 run osmo-hlr_10.42.42.2(pid=30714): ERR: Terminated: ERROR {rc=237} [trial-2398↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30714)] 02:39:51.702026 run osmo-hlr_10.42.42.2(pid=30714): stdout: | (launched: 2022-12-14_02:39:48.177570) 02:39:51.754531 run osmo-hlr_10.42.42.2(pid=30714): stderr: | �[0;m�[1;31m20221214023948378 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214023948378 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214023948378 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214023948378 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214023948379 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214023948379 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214023948390 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214023948398 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214023948399 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214023948399 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:39:51.799840 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30707): Terminating (SIGTERM) 02:39:51.842547 run iperf3-srv_10.42.42.10(pid=30708): Terminating (SIGTERM) 02:39:51.884793 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30709): Terminating (SIGTERM) 02:39:51.926943 run iperf3-srv_10.42.42.10(pid=30710): Terminating (SIGTERM) 02:39:51.969316 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30713): Terminating (SIGTERM) 02:39:52.011501 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30716): Terminating (SIGTERM) 02:39:52.053676 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30719): Terminating (SIGTERM) 02:39:52.063220 --- ParallelTerminationStrategy: PID 30707 died... 02:39:52.119866 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30707): Terminated: ok {rc=0} 02:39:52.129878 --- ParallelTerminationStrategy: PID 30708 died... 02:39:52.186009 run iperf3-srv_10.42.42.10(pid=30708): Terminated {rc=256} 02:39:52.195915 --- ParallelTerminationStrategy: PID 30709 died... 02:39:52.252102 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30709): Terminated: ok {rc=0} 02:39:52.262116 --- ParallelTerminationStrategy: PID 30710 died... 02:39:52.317992 run iperf3-srv_10.42.42.10(pid=30710): Terminated {rc=256} 02:39:52.327948 --- ParallelTerminationStrategy: PID 30713 died... 02:39:52.384060 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30713): Terminated: ok {rc=0} 02:39:52.394024 --- ParallelTerminationStrategy: PID 30716 died... 02:39:52.450322 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30716): Terminated: ok {rc=0} 02:39:52.460324 --- ParallelTerminationStrategy: PID 30719 died... 02:39:52.516589 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30719): Terminated: ok {rc=0} 02:39:52.603313 bus /gobi_0: Setting Powered False 02:39:53.709754 bus /gobi_0: Setting Powered False 02:39:54.823297 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30717): Process ended prematurely: osmo-stp_10.42.42.5(pid=30717) [trial-2398↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30717)]