Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=31430): Process ended prematurely: osmo-stp_10.42.42.5(pid=31430) [trial-2398↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31430)]
Standard Output
---------------------------------------------- trial-2398 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 02:49:54.852097 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:49:54.863528 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 02:49:55.024224 tst cs_paging_gprs_active.py: using LAC 38027 02:49:55.149117 tst cs_paging_gprs_active.py: using RAC 32 02:49:55.273309 tst cs_paging_gprs_active.py: using CellId 38027 02:49:55.398253 tst cs_paging_gprs_active.py: using BVCI 38028 02:49:55.422772 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:49:55.433955 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:49:55.444898 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:49:55.456046 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:49:55.467416 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:49:55.478747 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:49:55.490191 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:49:55.501663 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:49:55.513390 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:49:55.630113 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:49:55.908940 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:49:56.032633 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:49:56.340938 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31420): Launched 02:49:56.598431 run iperf3-srv_10.42.42.10(pid=31421): Launched 02:49:56.779890 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:49:56.903729 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:49:57.211707 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31422): Launched 02:49:57.468213 run iperf3-srv_10.42.42.10(pid=31423): Launched 02:49:57.649729 tst cs_paging_gprs_active.py:38: start network... 02:49:57.773330 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:49:58.253565 run create_hlr_db(pid=31424): Launched 02:49:58.424669 bus /gobi_6: Setting Powered False 02:49:59.446557 run create_hlr_db(pid=31424): Terminated: ok {rc=0} 02:49:59.871402 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31426): Launched 02:50:00.191518 run osmo-hlr_10.42.42.2(pid=31427): Launched 02:50:00.312386 run osmo-stp_10.42.42.5: Starting osmo-stp 02:50:00.886774 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31429): Launched 02:50:01.343928 run osmo-stp_10.42.42.5(pid=31430): Launched 02:50:01.520070 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:50:02.074958 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31435): Launched 02:50:02.183813 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:50:02.449633 run patchelf(pid=31436): Launched 02:50:02.624339 run osmo-stp_10.42.42.5(pid=31430): ERR: Terminated: ERROR {rc=1} [trial-2398↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31430)] 02:50:02.753383 run osmo-stp_10.42.42.5(pid=31430): stdout: | (launched: 2022-12-14_02:50:01.068179) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:50:02.881301 run osmo-stp_10.42.42.5(pid=31430): stderr: | �[0;m�[38;5;43m20221214025001343 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214025001344 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214025001344 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214025001344 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214025001345 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214025001345 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214025001345 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:50:03.004682 run osmo-stp_10.42.42.5(pid=31430): stdout: | (launched: 2022-12-14_02:50:01.068179) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:50:03.127353 run osmo-stp_10.42.42.5(pid=31430): stderr: | �[0;m�[38;5;43m20221214025001343 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214025001344 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214025001344 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214025001344 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214025001345 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214025001345 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214025001345 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:50:03.270947 run patchelf(pid=31436): Terminating (SIGINT) 02:50:03.439291 run patchelf(pid=31436): Terminated: ok {rc=0} 02:50:03.470616 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=31430): Process ended prematurely: osmo-stp_10.42.42.5(pid=31430) [trial-2398↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31430)] [trial-2398↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 02:50:03.479813 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 02:50:03.539392 run osmo-hlr_10.42.42.2(pid=31427): ERR: Terminated: ERROR {rc=237} [trial-2398↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31427)] 02:50:03.588440 run osmo-hlr_10.42.42.2(pid=31427): stdout: | (launched: 2022-12-14_02:50:00.034148) 02:50:03.637832 run osmo-hlr_10.42.42.2(pid=31427): stderr: | �[0;m�[1;31m20221214025000233 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214025000233 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214025000233 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214025000233 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214025000234 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214025000234 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214025000246 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214025000255 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214025000255 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214025000255 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:50:03.679749 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31420): Terminating (SIGTERM) 02:50:03.719111 run iperf3-srv_10.42.42.10(pid=31421): Terminating (SIGTERM) 02:50:03.758501 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31422): Terminating (SIGTERM) 02:50:03.797736 run iperf3-srv_10.42.42.10(pid=31423): Terminating (SIGTERM) 02:50:03.837155 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31426): Terminating (SIGTERM) 02:50:03.876618 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31429): Terminating (SIGTERM) 02:50:03.915990 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31435): Terminating (SIGTERM) 02:50:03.925096 --- ParallelTerminationStrategy: PID 31420 died... 02:50:03.977455 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31420): Terminated: ok {rc=0} 02:50:03.986806 --- ParallelTerminationStrategy: PID 31421 died... 02:50:04.039246 run iperf3-srv_10.42.42.10(pid=31421): Terminated {rc=256} 02:50:04.048612 --- ParallelTerminationStrategy: PID 31422 died... 02:50:04.101052 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31422): Terminated: ok {rc=0} 02:50:04.110436 --- ParallelTerminationStrategy: PID 31423 died... 02:50:04.162625 run iperf3-srv_10.42.42.10(pid=31423): Terminated {rc=256} 02:50:04.171922 --- ParallelTerminationStrategy: PID 31426 died... 02:50:04.224200 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31426): Terminated: ok {rc=0} 02:50:04.233622 --- ParallelTerminationStrategy: PID 31429 died... 02:50:04.286248 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31429): Terminated: ok {rc=0} 02:50:04.295654 --- ParallelTerminationStrategy: PID 31435 died... 02:50:04.347901 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31435): Terminated: ok {rc=0} 02:50:04.435500 bus /gobi_0: Setting Powered False 02:50:05.539389 bus /gobi_0: Setting Powered False 02:50:06.650585 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31430): Process ended prematurely: osmo-stp_10.42.42.5(pid=31430) [trial-2398↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31430)]