Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=31296): Process ended prematurely: osmo-stp_10.42.42.5(pid=31296) [trial-2398↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31296)]
Standard Output
---------------------------------------------- trial-2398 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 02:47:56.024731 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:47:56.035866 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 02:47:56.175945 tst cs_paging_gprs_active.py: using LAC 38017 02:47:56.294961 tst cs_paging_gprs_active.py: using RAC 22 02:47:56.415755 tst cs_paging_gprs_active.py: using CellId 38017 02:47:56.537154 tst cs_paging_gprs_active.py: using BVCI 38018 02:47:56.560267 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:47:56.571120 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:47:56.581746 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:47:56.592258 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:47:56.602663 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:47:56.613627 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:47:56.624223 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:47:56.634669 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:47:56.645440 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:47:56.767431 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:47:57.062781 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:47:57.198950 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:47:57.535707 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31286): Launched 02:47:57.816872 run iperf3-srv_10.42.42.10(pid=31287): Launched 02:47:58.016931 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:47:58.153409 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:47:58.490101 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31288): Launched 02:47:58.771384 run iperf3-srv_10.42.42.10(pid=31289): Launched 02:47:58.971238 tst cs_paging_gprs_active.py:38: start network... 02:47:59.107627 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:47:59.621668 run create_hlr_db(pid=31290): Launched 02:47:59.810263 bus /gobi_6: Setting Powered False 02:48:00.833656 run create_hlr_db(pid=31290): Terminated: ok {rc=0} 02:48:01.289606 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31292): Launched 02:48:01.664212 run osmo-hlr_10.42.42.2(pid=31293): Launched 02:48:01.965600 run osmo-stp_10.42.42.5: Starting osmo-stp 02:48:02.602861 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31295): Launched 02:48:02.906743 run osmo-stp_10.42.42.5(pid=31296): Launched 02:48:03.017970 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:48:03.543350 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31298): Launched 02:48:03.651158 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:48:03.914919 run patchelf(pid=31299): Launched 02:48:04.091114 run osmo-stp_10.42.42.5(pid=31296): ERR: Terminated: ERROR {rc=1} [trial-2398↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31296)] 02:48:04.219942 run osmo-stp_10.42.42.5(pid=31296): stdout: | (launched: 2022-12-14_02:48:02.756708) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:48:04.348852 run osmo-stp_10.42.42.5(pid=31296): stderr: | �[0;m�[38;5;43m20221214024802927 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214024802927 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214024802927 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214024802928 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214024802928 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214024802928 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214024802928 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:48:04.473761 run osmo-stp_10.42.42.5(pid=31296): stdout: | (launched: 2022-12-14_02:48:02.756708) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:48:04.597198 run osmo-stp_10.42.42.5(pid=31296): stderr: | �[0;m�[38;5;43m20221214024802927 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214024802927 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214024802927 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214024802928 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214024802928 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214024802928 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214024802928 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:48:04.741892 run patchelf(pid=31299): Terminating (SIGINT) 02:48:04.912065 run patchelf(pid=31299): Terminated: ok {rc=0} 02:48:04.943386 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=31296): Process ended prematurely: osmo-stp_10.42.42.5(pid=31296) [trial-2398↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31296)] [trial-2398↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 02:48:04.952548 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 02:48:05.012055 run osmo-hlr_10.42.42.2(pid=31293): ERR: Terminated: ERROR {rc=237} [trial-2398↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31293)] 02:48:05.060342 run osmo-hlr_10.42.42.2(pid=31293): stdout: | (launched: 2022-12-14_02:48:01.458530) 02:48:05.109571 run osmo-hlr_10.42.42.2(pid=31293): stderr: | �[0;m�[1;31m20221214024801915 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214024801916 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214024801916 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214024801917 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214024801917 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214024801917 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214024801941 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214024801954 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214024801954 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214024801955 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:48:05.151334 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31286): Terminating (SIGTERM) 02:48:05.190684 run iperf3-srv_10.42.42.10(pid=31287): Terminating (SIGTERM) 02:48:05.230013 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31288): Terminating (SIGTERM) 02:48:05.269327 run iperf3-srv_10.42.42.10(pid=31289): Terminating (SIGTERM) 02:48:05.308818 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31292): Terminating (SIGTERM) 02:48:05.348211 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31295): Terminating (SIGTERM) 02:48:05.387604 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31298): Terminating (SIGTERM) 02:48:05.396789 --- ParallelTerminationStrategy: PID 31286 died... 02:48:05.449437 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31286): Terminated: ok {rc=0} 02:48:05.459017 --- ParallelTerminationStrategy: PID 31287 died... 02:48:05.511406 run iperf3-srv_10.42.42.10(pid=31287): Terminated {rc=256} 02:48:05.520826 --- ParallelTerminationStrategy: PID 31288 died... 02:48:05.573230 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31288): Terminated: ok {rc=0} 02:48:05.582710 --- ParallelTerminationStrategy: PID 31289 died... 02:48:05.634898 run iperf3-srv_10.42.42.10(pid=31289): Terminated {rc=256} 02:48:05.644308 --- ParallelTerminationStrategy: PID 31292 died... 02:48:05.696697 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31292): Terminated: ok {rc=0} 02:48:05.706983 --- ParallelTerminationStrategy: PID 31295 died... 02:48:05.759790 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31295): Terminated: ok {rc=0} 02:48:05.769364 --- ParallelTerminationStrategy: PID 31298 died... 02:48:05.821699 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31298): Terminated: ok {rc=0} 02:48:05.908892 bus /gobi_0: Setting Powered False 02:48:07.013166 bus /gobi_0: Setting Powered False 02:48:08.119667 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31296): Process ended prematurely: osmo-stp_10.42.42.5(pid=31296) [trial-2398↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31296)]