Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=8362): Process ended prematurely: osmo-stp_10.42.42.5(pid=8362) [trial-2399↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8362)]
Standard Output
---------------------------------------------- trial-2399 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 04:24:15.379404 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:24:15.391240 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 04:24:15.535083 tst cs_paging_gprs_active.py: using LAC 38525 04:24:15.658793 tst cs_paging_gprs_active.py: using RAC 20 04:24:15.782304 tst cs_paging_gprs_active.py: using CellId 38525 04:24:15.907668 tst cs_paging_gprs_active.py: using BVCI 38526 04:24:15.933302 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:24:15.951851 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:24:15.963580 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:24:15.975768 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:24:15.987473 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:24:15.999454 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:24:16.016567 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:24:16.028154 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 04:24:16.041259 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 04:24:16.161501 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 04:24:16.469257 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 04:24:16.627696 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:24:17.032313 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8352): Launched 04:24:17.368697 run iperf3-srv_10.42.42.10(pid=8353): Launched 04:24:17.604727 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 04:24:17.760095 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:24:18.157958 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8354): Launched 04:24:18.475598 run iperf3-srv_10.42.42.10(pid=8355): Launched 04:24:18.669244 tst cs_paging_gprs_active.py:38: start network... 04:24:18.798807 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:24:19.341577 run create_hlr_db(pid=8356): Launched 04:24:19.517813 bus /gobi_6: Setting Powered False 04:24:20.544108 run create_hlr_db(pid=8356): Terminated: ok {rc=0} 04:24:20.973221 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8358): Launched 04:24:21.376261 run osmo-hlr_10.42.42.2(pid=8359): Launched 04:24:21.616624 run osmo-stp_10.42.42.5: Starting osmo-stp 04:24:22.249129 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8361): Launched 04:24:22.656835 run osmo-stp_10.42.42.5(pid=8362): Launched 04:24:22.903393 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:24:23.504249 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8364): Launched 04:24:23.618193 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:24:23.905507 run patchelf(pid=8365): Launched 04:24:24.091364 run osmo-stp_10.42.42.5(pid=8362): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8362)] 04:24:24.229702 run osmo-stp_10.42.42.5(pid=8362): stdout: | (launched: 2022-12-14_04:24:22.408120) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:24:24.366071 run osmo-stp_10.42.42.5(pid=8362): stderr: | �[0;m�[38;5;43m20221214042422737 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214042422737 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214042422738 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214042422738 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214042422738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214042422738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214042422739 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:24:24.495746 run osmo-stp_10.42.42.5(pid=8362): stdout: | (launched: 2022-12-14_04:24:22.408120) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:24:24.626265 run osmo-stp_10.42.42.5(pid=8362): stderr: | �[0;m�[38;5;43m20221214042422737 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214042422737 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214042422738 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214042422738 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214042422738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214042422738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214042422739 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:24:24.776448 run patchelf(pid=8365): Terminating (SIGINT) 04:24:24.953579 run patchelf(pid=8365): Terminated: ok {rc=0} 04:24:24.986524 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8362): Process ended prematurely: osmo-stp_10.42.42.5(pid=8362) [trial-2399↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8362)] [trial-2399↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 04:24:24.997289 tst cs_paging_gprs_active.py:38: Test FAILED (9.6 sec) 04:24:25.059783 run osmo-hlr_10.42.42.2(pid=8359): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8359)] 04:24:25.111497 run osmo-hlr_10.42.42.2(pid=8359): stdout: | (launched: 2022-12-14_04:24:21.131940) 04:24:25.164928 run osmo-hlr_10.42.42.2(pid=8359): stderr: | �[0;m�[1;31m20221214042421465 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214042421465 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214042421465 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214042421465 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214042421465 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214042421465 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214042421483 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214042421499 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214042421499 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214042421499 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:24:25.209799 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8352): Terminating (SIGTERM) 04:24:25.253810 run iperf3-srv_10.42.42.10(pid=8353): Terminating (SIGTERM) 04:24:25.297501 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8354): Terminating (SIGTERM) 04:24:25.342794 run iperf3-srv_10.42.42.10(pid=8355): Terminating (SIGTERM) 04:24:25.387047 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8358): Terminating (SIGTERM) 04:24:25.430867 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8361): Terminating (SIGTERM) 04:24:25.475155 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8364): Terminating (SIGTERM) 04:24:25.485817 --- ParallelTerminationStrategy: PID 8352 died... 04:24:25.545353 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8352): Terminated: ok {rc=0} 04:24:25.556614 --- ParallelTerminationStrategy: PID 8353 died... 04:24:25.613666 run iperf3-srv_10.42.42.10(pid=8353): Terminated {rc=256} 04:24:25.624218 --- ParallelTerminationStrategy: PID 8354 died... 04:24:25.681167 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8354): Terminated: ok {rc=0} 04:24:25.691852 --- ParallelTerminationStrategy: PID 8355 died... 04:24:25.749747 run iperf3-srv_10.42.42.10(pid=8355): Terminated {rc=256} 04:24:25.760281 --- ParallelTerminationStrategy: PID 8358 died... 04:24:25.817251 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8358): Terminated: ok {rc=0} 04:24:25.827782 --- ParallelTerminationStrategy: PID 8361 died... 04:24:25.884482 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8361): Terminated: ok {rc=0} 04:24:25.895568 --- ParallelTerminationStrategy: PID 8364 died... 04:24:25.956722 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8364): Terminated: ok {rc=0} 04:24:26.043692 bus /gobi_0: Setting Powered False 04:24:27.150037 bus /gobi_0: Setting Powered False 04:24:28.258023 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8362): Process ended prematurely: osmo-stp_10.42.42.5(pid=8362) [trial-2399↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8362)]